luchianmihai/walnux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors

Browse source
This commit is contained in:
Gregory Nutt 2013-06-13 11:04:18 -06:00
parent 507bacc6d5
commit 1f056e3826
92 changed files with 468 additions and 153 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
ChangeLog
View file

@ -4962,3 +4962,6 @@
* arch/arm/src/sam34/sam_periphclks.h: A header file that just
includes the right header file. This cleans up the messy logic
in all of the C files and puts the mess in one place (2013-6-12).
* arch/arm/src/arm*/Toolchain.mk, Kconfig (and lots of configuration
files): Add support for a generic Windows EABI toolchain (2013-6-13).

2
arch/arm/include/sam34/sam3u_irq.h
View file

@ -58,7 +58,7 @@
#define SAM_PID_PMC (5) /* Power Management Controller */
#define SAM_PID_EEFC0 (6) /* Enhanced Embedded Flash Controller 0 */
#define SAM_PID_EEFC1 (7) /* Enhanced Embedded Flash Controller 1 */
#define SAM_PID_UART0 (8) /* Universal Asynchronous Receiver Transmitter */
#define SAM_PID_UART0 (8) /* Universal Asynchronous Receiver Transmitter 0 */
#define SAM_PID_SMC (9) /* Static Memory Controller */
#define SAM_PID_PIOA (10) /* Parallel I/O Controller A */
#define SAM_PID_PIOB (11) /* Parallel I/O Controller B */

15
arch/arm/src/arm/Kconfig
View file

@ -7,8 +7,8 @@ comment "ARM Configuration Options"
choice
prompt "Toolchain Selection"
default ARM_TOOLCHAIN_CODESOURCERYW if HOST_WINDOWS
default ARM_TOOLCHAIN_GNU_EABI if !HOST_WINDOWS
default ARM_TOOLCHAIN_GNU_EABIW if HOST_WINDOWS
default ARM_TOOLCHAIN_GNU_EABIL if !HOST_WINDOWS
config ARM_TOOLCHAIN_BUILDROOT
bool "Buildroot (Cygwin or Linux)"
@ -30,8 +30,15 @@ config ARM_TOOLCHAIN_DEVKITARM
bool "devkitARM GNU toolchain"
depends on HOST_WINDOWS
config ARM_TOOLCHAIN_GNU_EABI
bool "Generic GNU EABI toolchain"
config ARM_TOOLCHAIN_GNU_EABIL
bool "Generic GNU EABI toolchain under Linux (or other POSIX environment)"
---help---
This option should work for any modern GNU toolchain (GCC 4.5 or newer)
configured for arm-none-eabi-.
config ARM_TOOLCHAIN_GNU_EABIW
bool "Generic GNU EABI toolchain under Windows"
depends on HOST_WINDOWS
---help---
This option should work for any modern GNU toolchain (GCC 4.5 or newer)
configured for arm-none-eabi-.

33
arch/arm/src/arm/Toolchain.defs
View file

@ -51,6 +51,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARM_TOOLCHAIN ?= BUILDROOT
endif
ifeq ($(filter y, \
$(CONFIG_DM320_CODESOURCERYL) \
$(CONFIG_LPC31_CODESOURCERYL) \
@ -59,6 +60,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARM_TOOLCHAIN ?= CODESOURCERYL
endif
ifeq ($(filter y, \
$(CONFIG_DM320_CODESOURCERYW) \
$(CONFIG_LPC31_CODESOURCERYW) \
@ -67,6 +69,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARM_TOOLCHAIN ?= CODESOURCERYW
endif
ifeq ($(filter y, \
$(CONFIG_DM320_DEVKITARM) \
$(CONFIG_LPC31_DEVKITARM) \
@ -75,10 +78,17 @@ ifeq ($(filter y, \
),y)
CONFIG_ARM_TOOLCHAIN ?= DEVKITARM
endif
ifeq ($(filter y, \
$(CONFIG_ARM_TOOLCHAIN_GNU_EABI) \
$(CONFIG_ARM_TOOLCHAIN_GNU_EABIL) \
),y)
CONFIG_ARM_TOOLCHAIN ?= GNU_EABI
CONFIG_ARM_TOOLCHAIN ?= GNU_EABIL
endif
ifeq ($(filter y, \
$(CONFIG_ARM_TOOLCHAIN_GNU_EABIW) \
),y)
CONFIG_ARM_TOOLCHAIN ?= GNU_EABIW
endif
#
@ -91,7 +101,7 @@ endif
# Each toolchain definition should set:
#
# CROSSDEV The GNU toolchain triple (command prefix)
# ARCROSSDEV If required, an alternative prefix used when
# ARCROSSDEV If required, an alternative prefix used when
# invoking ar and nm.
# ARCHCPUFLAGS CPU-specific flags selecting the instruction set
# FPU options, etc.
@ -143,9 +153,20 @@ endif
# Generic GNU EABI toolchain on OS X, Linux or any typical Posix system
ifeq ($(CONFIG_ARM_TOOLCHAIN),GNU_EABI)
ifeq ($(CONFIG_ARM_TOOLCHAIN),GNU_EABIL)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
MAXOPTIMIZATION = -O3
endif
MAXOPTIMIZATION = -Os
endif
# Generic GNU EABI toolchain under Windows
ifeq ($(CONFIG_ARM_TOOLCHAIN),GNU_EABIW)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
MAXOPTIMIZATION = -Os
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
endif

15
arch/arm/src/armv6-m/Kconfig
View file

@ -7,8 +7,8 @@ comment "ARMV6M Configuration Options"
choice
prompt "Toolchain Selection"
default ARMV6M_TOOLCHAIN_CODESOURCERYW if HOST_WINDOWS
default ARMV6M_TOOLCHAIN_GNU_EABI if !HOST_WINDOWS
default ARMV6M_TOOLCHAIN_GNU_EABIW if HOST_WINDOWS
default ARMV6M_TOOLCHAIN_GNU_EABIL if !HOST_WINDOWS
config ARMV6M_TOOLCHAIN_ATOLLIC
bool "Atollic Lite/Pro for Windows"
@ -38,8 +38,15 @@ config ARMV6M_TOOLCHAIN_DEVKITARM
bool "devkitARM GNU toolchain"
depends on HOST_WINDOWS
config ARMV6M_TOOLCHAIN_GNU_EABI
bool "Generic GNU EABI toolchain"
config ARMV6M_TOOLCHAIN_GNU_EABIL
bool "Generic GNU EABI toolchain under Linux (or other POSIX environment)"
---help---
This option should work for any modern GNU toolchain (GCC 4.5 or newer)
configured for arm-none-eabi.
config ARMV6M_TOOLCHAIN_GNU_EABIW
bool "Generic GNU EABI toolchain under Windows"
depends on HOST_WINDOWS
---help---
This option should work for any modern GNU toolchain (GCC 4.5 or newer)
configured for arm-none-eabi.

30
arch/arm/src/armv6-m/Toolchain.defs
View file

@ -45,26 +45,37 @@
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_ATOLLIC)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= ATOLLIC
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= BUILDROOT
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODEREDL)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODEREDL
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODEREDW)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODEREDW
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODESOURCERYL
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODESOURCERYW
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= DEVKITARM
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= GNU_EABI
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= GNU_EABIL
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIW)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= GNU_EABIW
endif
#
@ -77,7 +88,7 @@ endif
# Each toolchain definition should set:
#
# CROSSDEV The GNU toolchain triple (command prefix)
# ARCROSSDEV If required, an alternative prefix used when
# ARCROSSDEV If required, an alternative prefix used when
# invoking ar and nm.
# ARCHCPUFLAGS CPU-specific flags selecting the instruction set
# options, etc.
@ -155,11 +166,20 @@ endif
# Generic GNU EABI toolchain on OS X, Linux or any typical Posix system
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),GNU_EABI)
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),GNU_EABIL)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
endif
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),GNU_EABIW)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# Individual tools may limit the optimizatin level but, by default, the
# optimization level will be set to to -Os

15
arch/arm/src/armv7-m/Kconfig
View file

@ -7,8 +7,8 @@ comment "ARMV7M Configuration Options"
choice
prompt "Toolchain Selection"
default ARMV7M_TOOLCHAIN_CODESOURCERYW if HOST_WINDOWS
default ARMV7M_TOOLCHAIN_GNU_EABI if !HOST_WINDOWS
default ARMV7M_TOOLCHAIN_GNU_EABIW if HOST_WINDOWS
default ARMV7M_TOOLCHAIN_GNU_EABIL if !HOST_WINDOWS
config ARMV7M_TOOLCHAIN_ATOLLIC
bool "Atollic Lite/Pro for Windows"
@ -38,8 +38,15 @@ config ARMV7M_TOOLCHAIN_DEVKITARM
bool "devkitARM GNU toolchain"
depends on HOST_WINDOWS
config ARMV7M_TOOLCHAIN_GNU_EABI
bool "Generic GNU EABI toolchain"
config ARMV7M_TOOLCHAIN_GNU_EABIL
bool "Generic GNU EABI toolchain under Linux (or other POSIX environment)"
---help---
This option should work for any modern GNU toolchain (GCC 4.5 or newer)
configured for arm-none-eabi.
config ARMV7M_TOOLCHAIN_GNU_EABIW
bool "Generic GNU EABI toolchain under Windows"
depends on HOST_WINDOWS
---help---
This option should work for any modern GNU toolchain (GCC 4.5 or newer)
configured for arm-none-eabi.

52
arch/arm/src/armv7-m/Toolchain.defs
View file

@ -51,6 +51,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= ATOLLIC
endif
ifeq ($(filter y, \
$(CONFIG_KINETIS_BUILDROOT) \
$(CONFIG_LM_BUILDROOT) \
@ -62,12 +63,14 @@ ifeq ($(filter y, \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= BUILDROOT
endif
ifeq ($(filter y, \
$(CONFIG_LPC17_CODEREDL) \
$(CONFIG_ARMV7M_TOOLCHAIN_CODEREDL) \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= CODEREDL
endif
ifeq ($(filter y, \
$(CONFIG_LPC17_CODEREDW) \
$(CONFIG_LPC43_CODEREDW) \
@ -75,6 +78,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= CODEREDW
endif
ifeq ($(filter y, \
$(CONFIG_KINETIS_CODESOURCERYL) \
$(CONFIG_LM_CODESOURCERYL) \
@ -86,6 +90,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= CODESOURCERYL
endif
ifeq ($(filter y, \
$(CONFIG_KINETIS_CODESOURCERYW) \
$(CONFIG_LM_CODESOURCERYW) \
@ -97,6 +102,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= CODESOURCERYW
endif
ifeq ($(filter y, \
$(CONFIG_KINETIS_DEVKITARM) \
$(CONFIG_LM_DEVKITARM) \
@ -108,11 +114,7 @@ ifeq ($(filter y, \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= DEVKITARM
endif
ifeq ($(filter y, \
$(CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI) \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= GNU_EABI
endif
ifeq ($(filter y, \
$(CONFIG_STM32_RAISONANCE) \
$(CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE) \
@ -120,6 +122,18 @@ ifeq ($(filter y, \
CONFIG_ARMV7M_TOOLCHAIN ?= RAISONANCE
endif
ifeq ($(filter y, \
$(CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL) \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= GNU_EABIL
endif
ifeq ($(filter y, \
$(CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW) \
),y)
CONFIG_ARMV7M_TOOLCHAIN ?= GNU_EABIW
endif
#
# Supported toolchains
#
@ -130,7 +144,7 @@ endif
# Each toolchain definition should set:
#
# CROSSDEV The GNU toolchain triple (command prefix)
# ARCROSSDEV If required, an alternative prefix used when
# ARCROSSDEV If required, an alternative prefix used when
# invoking ar and nm.
# ARCHCPUFLAGS CPU-specific flags selecting the instruction set
# FPU options, etc.
@ -240,10 +254,10 @@ endif
# Generic GNU EABI toolchain on OS X, Linux or any typical Posix system
ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),GNU_EABI)
ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),GNU_EABIL)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
MAXOPTIMIZATION = -O3
MAXOPTIMIZATION = -Os
ifeq ($(CONFIG_ARCH_CORTEXM4),y)
ifeq ($(CONFIG_ARCH_FPU),y)
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
@ -253,7 +267,27 @@ ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),GNU_EABI)
else ifeq ($(CONFIG_ARCH_CORTEXM3),y)
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
endif
endif
# Generic GNU EABI toolchain under Windows
ifeq ($(CONFIG_ARMV7M_TOOLCHAIN),GNU_EABIW)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
MAXOPTIMIZATION = -Os
ifeq ($(CONFIG_ARCH_CORTEXM4),y)
ifeq ($(CONFIG_ARCH_FPU),y)
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
else
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfloat-abi=soft
endif
else ifeq ($(CONFIG_ARCH_CORTEXM3),y)
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
endif
# Raisonance RIDE7 under Windows

12
arch/arm/src/sam34/sam_serial.c
View file

@ -903,6 +903,7 @@ static int up_interrupt(int irq, void *context)
{
PANIC();
}
priv = (struct up_dev_s*)dev->priv;
/* Loop until there are no characters to be transferred or, until we have
@ -937,13 +938,14 @@ static int up_interrupt(int irq, void *context)
if ((pending & UART_INT_TXRDY) != 0)
{
/* Transmit data regiser empty ... process outgoing bytes */
/* Transmit data register empty ... process outgoing bytes */
uart_xmitchars(dev);
handled = true;
}
}
return OK;
return OK;
}
/****************************************************************************
@ -1175,6 +1177,9 @@ void up_earlyserialinit(void)
#ifdef TTYS4_DEV
up_disableallints(TTYS4_DEV.priv, NULL);
#endif
#ifdef TTYS5_DEV
up_disableallints(TTYS5_DEV.priv, NULL);
#endif
/* Configuration whichever one is the console */
@ -1216,6 +1221,9 @@ void up_serialinit(void)
#ifdef TTYS4_DEV
(void)uart_register("/dev/ttyS4", &TTYS4_DEV);
#endif
#ifdef TTYS5_DEV
(void)uart_register("/dev/ttyS5", &TTYS5_DEV);
#endif
}
/****************************************************************************

2
configs/ea3131/README.txt
View file

@ -48,7 +48,7 @@ GNU Toolchain Options
CONFIG_LPC31_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_LPC31_DEVKITARM=y : devkitARM under Windows
CONFIG_LPC31_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
CONFIG_ARM_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
CONFIG_ARM_TOOLCHAIN_GNU_EABIL : Generic arm-none-eabi toolchain
If you are not using CONFIG_LPC31_BUILDROOT, then you may also have to modify
the PATH in the setenv.h file if your make cannot find the tools.

2
configs/ea3152/README.txt
View file

@ -47,7 +47,7 @@ GNU Toolchain Options
CONFIG_LPC31_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_LPC31_DEVKITARM=y : devkitARM under Windows
CONFIG_LPC31_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
CONFIG_ARM_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
CONFIG_ARM_TOOLCHAIN_GNU_EABIL : Generic arm-none-eabi toolchain
If you are not using CONFIG_LPC31_BUILDROOT, then you may also have to modify
the PATH in the setenv.h file if your make cannot find the tools.

2
configs/ekk-lm3s9b96/nsh/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_BOARD_LOOPSPERMSEC=4531
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/ekk-lm3s9b96/ostest/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_BOARD_LOOPSPERMSEC=4531
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/freedom-kl25z/nsh/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_GPIO_IRQ is not set
#

2
configs/freedom-kl25z/ostest/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_GPIO_IRQ is not set
#

2
configs/hymini-stm32v/README.txt
View file

@ -579,7 +579,7 @@ Where <subdir> is one of the following:
Uses apps/examples/buttons to exercise HY-MiniSTM32V buttons and
button interrupts.
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y : Generic GNU EABI toolchain
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y : Generic GNU EABI toolchain
nsh and nsh2:
------------

2
configs/hymini-stm32v/buttons/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/hymini-stm32v/nsh/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
CONFIG_SDIO_DMA=y
CONFIG_SDIO_DMAPRIO=0x00001000

2
configs/hymini-stm32v/nsh2/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
CONFIG_SDIO_DMA=y
CONFIG_SDIO_DMAPRIO=0x00001000

2
configs/hymini-stm32v/ostest/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/hymini-stm32v/usbnsh/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/kwikstik-k40/ostest/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/lm3s6965-ek/discover/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_BOARD_LOOPSPERMSEC=4531
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/lm3s6965-ek/nsh/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_BOARD_LOOPSPERMSEC=4531
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/lm3s6965-ek/nx/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_BOARD_LOOPSPERMSEC=4531
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/lm3s6965-ek/ostest/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_BOARD_LOOPSPERMSEC=4531
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/lm3s6965-ek/tcpecho/defconfig
View file

@ -110,7 +110,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
#
# Stellaris Configuration Options

2
configs/lm4f120-launchpad/nsh/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/lm4f120-launchpad/ostest/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/mcu123-lpc214x/README.txt
View file

@ -363,7 +363,7 @@ nsh:
2. Default platform/toolchain:
CONFIG_HOST_LINUX=y : Windows
CONFIG_ARM_TOOLCHAIN_GNU_EABI=y : Buildroot (arm-nuttx-elf-gcc)
CONFIG_ARM_TOOLCHAIN_GNU_EABIL=y : Buildroot (arm-nuttx-elf-gcc)
CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary
ostest:

2
configs/mcu123-lpc214x/nsh/defconfig
View file

@ -87,7 +87,7 @@ CONFIG_BOARD_LOOPSPERMSEC=3270
#
# CONFIG_ARM_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARM_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARM_TOOLCHAIN_GNU_EABI=y
CONFIG_ARM_TOOLCHAIN_GNU_EABIL=y
#
# LPC214x Configuration Options

2
configs/mikroe-stm32f4/fulldemo/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/mikroe-stm32f4/kostest/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_ARMV7M_MPU_NREGIONS=8
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/mikroe-stm32f4/nsh/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/mikroe-stm32f4/nx/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
#
# STM32 Configuration Options

2
configs/mikroe-stm32f4/nxlines/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
#
# STM32 Configuration Options

2
configs/mikroe-stm32f4/nxtext/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
#
# STM32 Configuration Options

2
configs/mikroe-stm32f4/usbnsh/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/ntosd-dm320/README.txt
View file

@ -67,7 +67,7 @@ GNU Toolchain Options
CONFIG_DM320_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_DM320_DEVKITARM=y : devkitARM under Windows
CONFIG_DM320_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
CONFIG_ARM_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
CONFIG_ARM_TOOLCHAIN_GNU_EABIL : Generic arm-none-eabi toolchain
If you are not using CONFIG_DM320_BUILDROOT, then you may also have to modify
the PATH in the setenv.h file if your make cannot find the tools.

2
configs/nucleus2g/usbserial/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set

2
configs/nutiny-nuc120/nsh/defconfig
View file

@ -94,7 +94,7 @@ CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV6M_TOOLCHAIN_CODEREDW is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW is not set
# CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL is not set
#
# NUC100/120 Configuration Options

2
configs/nutiny-nuc120/ostest/defconfig
View file

@ -96,7 +96,7 @@ CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV6M_TOOLCHAIN_CODEREDW is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW is not set
# CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL is not set
#
# NUC100/120 Configuration Options

2
configs/olimex-lpc1766stk/hidkbd/defconfig
View file

@ -94,7 +94,7 @@ CONFIG_BOARD_LOOPSPERMSEC=8111
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
#

2
configs/olimex-lpc1766stk/nettest/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_BOARD_LOOPSPERMSEC=8111
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/olimex-lpc1766stk/nsh/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_BOARD_LOOPSPERMSEC=8111
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/olimex-lpc1766stk/usbserial/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set

2
configs/open1788/knsh/defconfig
View file

@ -96,7 +96,7 @@ CONFIG_ARMV7M_MPU_NREGIONS=8
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/open1788/nsh/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set

2
configs/open1788/nxlines/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set

2
configs/open1788/ostest/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set

2
configs/pirelli_dpl10/nsh_highram/defconfig
View file

@ -88,7 +88,7 @@ CONFIG_ARCH_HAVE_LOWVECTORS=y
#
CONFIG_ARM_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARM_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARM_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARM_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARM_OABI_TOOLCHAIN=y
#

102
configs/sam3u-ek/README.txt
View file

@ -424,13 +424,30 @@ Configuration sub-directories
NOTES:
1. This configuration uses the older, OABI, buildroot toolchain. But
1. This configuration is setup for Linux (or any other POSIX environment
like Cygwin under Windows):
Build Setup:
CONFIG_HOST_LINUX=y : Linux or other POSIX environment
2. This configuration uses the older, OABI, buildroot toolchain. But
that is easily reconfigured:
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
2. At the end of the build, there will be several files in the top-level
If you want to use the Atmel GCC toolchain, here are the steps to
do so:
Build Setup:
CONFIG_HOST_WINDOWS=y : Windows
CONFIG_HOST_CYGWIN=y : Using Cygwin or other POSIX environment
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y : General GCC EABI toolchain under windows
3. At the end of the build, there will be several files in the top-level
NuttX build directory:
PASS1:
@ -446,7 +463,7 @@ Configuration sub-directories
The J-Link programmer will except files in .hex, .mot, .srec, and .bin
formats.
3. Combining .hex files. If you plan to use the .hex files with your
4. Combining .hex files. If you plan to use the .hex files with your
debugger or FLASH utility, then you may need to combine the two hex
files into a single .hex file. Here is how you can do that.
@ -496,14 +513,30 @@ Configuration sub-directories
NOTES:
1. This configuration uses the older, OABI, buildroot toolchain. But
1. This configuration is setup for Linux (or any other POSIX environment
like Cygwin under Windows):
Build Setup:
CONFIG_HOST_LINUX=y : Linux or other POSIX environment
2. This configuration uses the older, OABI, buildroot toolchain. But
that is easily reconfigured:
System Type:
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
2. NSH built-in applications are supported. However, there are
If you want to use the Atmel GCC toolchain, here are the steps to
do so:
Build Setup:
CONFIG_HOST_WINDOWS=y : Windows
CONFIG_HOST_CYGWIN=y : Using Cygwin or other POSIX environment
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y : General GCC EABI toolchain under windows
3. NSH built-in applications are supported. However, there are
no built-in applications built with the default configuration.
Binary Formats:
@ -512,7 +545,7 @@ Configuration sub-directories
Applicaton Configuration:
CONFIG_NSH_BUILTIN_APPS=y : Enable starting apps from NSH command line
3. This configuration has been used for verifying the touchscreen on
4. This configuration has been used for verifying the touchscreen on
on the SAM3U-EK LCD. With these modifications, you can include the
touchscreen test program at apps/examples/touchscreen as an NSH built-in
application. You can enable the touchscreen and test by modifying the
@ -558,7 +591,58 @@ Configuration sub-directories
Configures to use examples/nx using the HX834x LCD hardware on
the SAM3U-EK development board.
NOTES:
1. This configuration is setup for Linux (or any other POSIX environment
like Cygwin under Windows):
Build Setup:
CONFIG_HOST_LINUX=y : Linux or other POSIX environment
2. This configuration uses the older, OABI, buildroot toolchain. But
that is easily reconfigured:
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
If you want to use the Atmel GCC toolchain, here are the steps to
do so:
Build Setup:
CONFIG_HOST_WINDOWS=y : Windows
CONFIG_HOST_CYGWIN=y : Using Cygwin or other POSIX environment
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y : General GCC EABI toolchain under windows
ostest:
This configuration directory, performs a simple OS test using
examples/ostest. By default, this project assumes that you are
using the DFU bootloader.
NOTES:
1. This configuration is setup for Linux (or any other POSIX environment
like Cygwin under Windows):
Build Setup:
CONFIG_HOST_LINUX=y : Linux or other POSIX environment
2. This configuration uses the older, OABI, buildroot toolchain. But
that is easily reconfigured:
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
If you want to use the Atmel GCC toolchain, here are the steps to
do so:
Build Setup:
CONFIG_HOST_WINDOWS=y : Windows
CONFIG_HOST_CYGWIN=y : Using Cygwin or other POSIX environment
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y : General GCC EABI toolchain under windows

2
configs/sam3u-ek/knsh/defconfig
View file

@ -96,7 +96,7 @@ CONFIG_ARMV7M_MPU_NREGIONS=8
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set
# CONFIG_SDIO_DMA is not set

39
configs/sam3u-ek/knsh/setenv.sh
View file

@ -32,15 +32,44 @@
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the Atmel GCC
# toolchain under Windows. You will also have to edit this if you install
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

2
configs/sam3u-ek/nsh/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set

39
configs/sam3u-ek/nsh/setenv.sh
View file

@ -32,15 +32,44 @@
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the Atmel GCC
# toolchain under Windows. You will also have to edit this if you install
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

8
configs/sam3u-ek/nx/defconfig
View file

@ -79,7 +79,7 @@ CONFIG_ARCH_CHIP_SAM34=y
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="sam34"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARMV7M_USEBASEPRI=y
# CONFIG_ARCH_HAVE_FPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set
@ -423,9 +423,7 @@ CONFIG_NX_KBD=y
# Framed Window Borders
#
CONFIG_NXTK_BORDERWIDTH=4
CONFIG_NXTK_BORDERCOLOR1=0x5cb7
CONFIG_NXTK_BORDERCOLOR2=0x21c9
CONFIG_NXTK_BORDERCOLOR3=0xffdf
CONFIG_NXTK_DEFAULT_BORDERCOLORS=y
# CONFIG_NXTK_AUTORAISE is not set
#

40
configs/sam3u-ek/nx/setenv.sh
View file

@ -31,16 +31,44 @@
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the Atmel GCC
# toolchain under Windows. You will also have to edit this if you install
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

2
configs/sam3u-ek/ostest/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_GPIO_IRQ is not set

39
configs/sam3u-ek/ostest/setenv.sh
View file

@ -32,15 +32,44 @@
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the Atmel GCC
# toolchain under Windows. You will also have to edit this if you install
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

2
configs/sam4l-xplained/nsh/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/sam4l-xplained/ostest/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/sam4s-xplained/nsh/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/sam4s-xplained/ostest/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/shenzhou/nxwm/defconfig
View file

@ -96,7 +96,7 @@ CONFIG_BOARD_LOOPSPERMSEC=5483
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set
# CONFIG_NET_MULTICAST is not set

2
configs/stm3210e-eval/usbserial/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm3220g-eval/README.txt
View file

@ -60,7 +60,7 @@ GNU Toolchain Options
CONFIG_STM32_DEVKITARM=y : devkitARM under Windows
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI : Generic arm-none-eabi toolchain
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL : Generic arm-none-eabi toolchain
If you change the default toolchain, then you may also have to modify the PATH in
the setenv.h file if your make cannot find the tools.

2
configs/stm3220g-eval/nxwm/defconfig
View file

@ -96,7 +96,7 @@ CONFIG_BOARD_LOOPSPERMSEC=10926
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set
# CONFIG_NET_MULTICAST is not set

2
configs/stm3240g-eval/ostest/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32_tiny/nsh/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_OABI_TOOLCHAIN is not set
CONFIG_SERIAL_TERMIOS=y

2
configs/stm32_tiny/usbnsh/defconfig
View file

@ -91,7 +91,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
# CONFIG_SERIAL_TERMIOS is not set
#

2
configs/stm32f3discovery/nsh/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_BOARD_LOOPSPERMSEC=6522
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f3discovery/ostest/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_BOARD_LOOPSPERMSEC=6522
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f3discovery/usbnsh/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f4discovery/elf/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f4discovery/kostest/defconfig
View file

@ -103,7 +103,7 @@ CONFIG_ARMV7M_MPU_NREGIONS=8
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f4discovery/nsh/defconfig
View file

@ -97,7 +97,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f4discovery/nxlines/defconfig
View file

@ -99,7 +99,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f4discovery/ostest/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f4discovery/posix_spawn/defconfig
View file

@ -97,7 +97,7 @@ CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32f4discovery/usbnsh/defconfig
View file

@ -98,7 +98,7 @@ CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/stm32ldiscovery/nsh/defconfig
View file

@ -97,7 +97,7 @@ CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_SERIAL_TERMIOS is not set

2
configs/twr-k60n512/nsh/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/twr-k60n512/ostest/defconfig
View file

@ -89,7 +89,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/zkit-arm-1769/hello/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_BOARD_LOOPSPERMSEC=8079
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/zkit-arm-1769/nsh/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/zkit-arm-1769/nxhello/defconfig
View file

@ -90,7 +90,7 @@ CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

2
configs/zkit-arm-1769/thttpd/defconfig
View file

@ -92,7 +92,7 @@ CONFIG_BOARD_LOOPSPERMSEC=8079
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#

4
configs/zp214xpa/README.txt
View file

@ -312,7 +312,7 @@ Configurations:
2. Default platform/toolchain:
CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too).
CONFIG_ARM_TOOLCHAIN_GNU_EABI=y : Buildroot (arm-nuttx-elf-gcc)
CONFIG_ARM_TOOLCHAIN_GNU_EABIL=y : Buildroot (arm-nuttx-elf-gcc)
CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary
nxlines:
@ -336,7 +336,7 @@ Configurations:
2. Default platform/toolchain:
CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too).
CONFIG_ARM_TOOLCHAIN_GNU_EABI=y : Buildroot (arm-nuttx-elf-gcc)
CONFIG_ARM_TOOLCHAIN_GNU_EABIL=y : Buildroot (arm-nuttx-elf-gcc)
CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary
3. Verified as of this writing (2012-12-30).

2
configs/zp214xpa/nsh/defconfig
View file

@ -87,7 +87,7 @@ CONFIG_BOARD_LOOPSPERMSEC=3270
#
# CONFIG_ARM_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARM_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARM_TOOLCHAIN_GNU_EABI=y
CONFIG_ARM_TOOLCHAIN_GNU_EABIL=y
#
# LPC214x Configuration Options

2
configs/zp214xpa/nxlines/defconfig
View file

@ -87,7 +87,7 @@ CONFIG_BOARD_LOOPSPERMSEC=3270
#
# CONFIG_ARM_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARM_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARM_TOOLCHAIN_GNU_EABI=y
CONFIG_ARM_TOOLCHAIN_GNU_EABIL=y
#
# LPC214x Configuration Options

23
graphics/Kconfig
View file

@ -131,33 +131,44 @@ config NXTK_BORDERWIDTH
Specifies with with of the border (in pixels) used with framed windows.
The default is 4.
config NXTK_DEFAULT_BORDERCOLORS
bool "Use Default Border Colors"
default y
---help---
If this option is defined, the default system border colors will be
used on framed windows. Otherwise, additional options will be
present so that you can define custom board colors.
if !NXTK_DEFAULT_BORDERCOLORS
config NXTK_BORDERCOLOR1
hex "Border Color"
default 0
default 0x0
---help---
Specify the colors of the border used with framed windows.
NXTL_BODERCOLOR is the "normal" color of the border.
NXTL_BORDERCOLOR1 is the "normal" color of the border.
NXTK_BORDERCOLOR2 is the shadow side color and so is normally darker.
NXTK_BORDERCOLOR3 is the shiny side color and so is normally brighter.
config NXTK_BORDERCOLOR2
hex "Darker Border Color"
default 0
default 0x0
---help---
Specify the colors of the border used with framed windows.
NXTL_BODERCOLOR is the "normal" color of the border.
NXTL_BORDERCOLOR1 is the "normal" color of the border.
NXTK_BORDERCOLOR2 is the shadow side color and so is normally darker.
NXTK_BORDERCOLOR3 is the shiny side color and so is normally brighter.
config NXTK_BORDERCOLOR3
hex "Brighter Border Color"
default 0
default 0x0
---help---
Specify the colors of the border used with framed windows.
NXTL_BODERCOLOR is the "normal" color of the border.
NXTL_BORDERCOLOR1 is the "normal" color of the border.
NXTK_BORDERCOLOR2 is the shadow side color and so is normally darker.
NXTK_BORDERCOLOR3 is the shiny side color and so is normally brighter.
endif
endmenu
config NXTK_AUTORAISE