diff --git a/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h b/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h
index 81e2cb3a9f..dcdd8fb5fe 100644
--- a/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h
+++ b/boards/arm/imxrt/imxrt1060-evk/src/imxrt1060-evk.h
@@ -162,7 +162,7 @@
 #define IOMUX_FT5X06_RST     (IOMUX_PULL_NONE | IOMUX_CMOS_OUTPUT | \
                               IOMUX_DRIVE_40OHM | IOMUX_SPEED_MEDIUM | \
                               IOMUX_SLEW_SLOW)                            /* AD_B0_11 */
-#define GPIO_FT5X06_CTRSTn   (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | \
+#define GPIO_FT5X06_CTRSTN   (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | \
                               GPIO_PORT1 | GPIO_PIN2 | IOMUX_FT5X06_RST)  /* AD_B0_02 */
 
 /* Test Pins ****************************************************************/
diff --git a/boards/arm/imxrt/imxrt1060-evk/src/imxrt_ft5x06.c b/boards/arm/imxrt/imxrt1060-evk/src/imxrt_ft5x06.c
index 619d645448..85f337e83e 100644
--- a/boards/arm/imxrt/imxrt1060-evk/src/imxrt_ft5x06.c
+++ b/boards/arm/imxrt/imxrt1060-evk/src/imxrt_ft5x06.c
@@ -186,7 +186,7 @@ static void imxrt_ft5x06_wakeup(FAR const struct ft5x06_config_s *config)
 static void imxrt_ft5x06_nreset(FAR const struct ft5x06_config_s *config,
                                 bool nstate)
 {
-  imxrt_gpio_write(GPIO_FT5X06_CTRSTn, nstate);
+  imxrt_gpio_write(GPIO_FT5X06_CTRSTN, nstate);
 }
 
 /****************************************************************************
@@ -206,9 +206,9 @@ int imxrt_ft5x06_register(void)
   FAR struct i2c_master_s *i2c;
   int ret;
 
-  /* Initialize CTRSTn pin */
+  /* Initialize CTRSTN pin */
 
-  imxrt_config_gpio(GPIO_FT5X06_CTRSTn);
+  imxrt_config_gpio(GPIO_FT5X06_CTRSTN);
 
 #ifndef CONFIG_FT5X06_POLLMODE
   int irq;
@@ -228,7 +228,7 @@ int imxrt_ft5x06_register(void)
 
   /* Take the FT5X06 out of reset */
 
-  imxrt_gpio_write(GPIO_FT5X06_CTRSTn, true);
+  imxrt_gpio_write(GPIO_FT5X06_CTRSTN, true);
 
   /* The FT5X06 is on LPI2C1.  Get the handle and register the F5x06 device */
 
@@ -246,7 +246,7 @@ int imxrt_ft5x06_register(void)
           syslog(LOG_ERR, "ERROR: Failed to register FT5X06 driver: %d\n",
                  ret);
 
-          imxrt_gpio_write(GPIO_FT5X06_CTRSTn, false);
+          imxrt_gpio_write(GPIO_FT5X06_CTRSTN, false);
           imxrt_i2cbus_uninitialize(i2c);
           return ret;
         }
diff --git a/boards/arm/stm32/mikroe-stm32f4/src/stm32_vs1053.c b/boards/arm/stm32/mikroe-stm32f4/src/stm32_vs1053.c
index 3e3746e841..4ad3e8ab7b 100644
--- a/boards/arm/stm32/mikroe-stm32f4/src/stm32_vs1053.c
+++ b/boards/arm/stm32/mikroe-stm32f4/src/stm32_vs1053.c
@@ -170,7 +170,7 @@ void up_vs1053initialize(FAR struct spi_dev_s * spi)
 {
   int   ret;
   char  name[8];
-  FAR struct audio_lowerhalf_s *pVs1053;
+  FAR struct audio_lowerhalf_s *PVS1053;
 
   /* Assumptions:
    * 1) SPI pins were configured in up_spi.c early in the boot-up phase.
@@ -192,8 +192,8 @@ void up_vs1053initialize(FAR struct spi_dev_s * spi)
 
   /* Bind the SPI port to the VS1053 driver */
 
-  pVs1053 = vs1053_initialize(spi, &g_vs1053lower.lower, VS1053_DEVNO);
-  if (pVs1053 == NULL)
+  PVS1053 = vs1053_initialize(spi, &g_vs1053lower.lower, VS1053_DEVNO);
+  if (PVS1053 == NULL)
     {
       auderr("ERROR: Failed to bind SPI port %d VS1053 device\n",
              VS1053_DEVNO);
@@ -203,7 +203,7 @@ void up_vs1053initialize(FAR struct spi_dev_s * spi)
   /* Now register the audio device */
 
   sprintf(name, "vs1053d%d", VS1053_DEVNO);
-  ret = audio_register(name, pVs1053);
+  ret = audio_register(name, PVS1053);
   if (ret < 0)
     {
       auderr("ERROR: Failed to register VS1053 Audio device\n");