diff --git a/Documentation/applications/system/ntpc/index.rst b/Documentation/applications/system/ntpc/index.rst
index fc1d9d0cd8..53fef6bdd4 100644
--- a/Documentation/applications/system/ntpc/index.rst
+++ b/Documentation/applications/system/ntpc/index.rst
@@ -1,3 +1,106 @@
 ============================
 ``ntpc`` NTP Daemon Commands
 ============================
+
+This example demonstrates how to use the NTP client to synchronize system time
+and retrieve the current time and date. It uses the Network Time Protocol (NTP)
+to provide accurate time synchronization.
+
+Description
+-----------
+
+The ntpc example:
+
+- Uses the NTP client library to synchronize system time
+
+- Connects to NTP servers (default: pool.ntp.org)
+
+- Starts the NTP client in the background for continuous synchronization
+
+- Provides commands to check status and stop the NTP client
+
+- Allows management of the NTP client through command line options
+
+Note: This example assumes that network connectivity is already established.
+
+The NTP (Network Time Protocol) is a sophisticated protocol that provides
+high-precision time synchronization and is the standard for network time services.
+
+Configuration
+-------------
+
+This example requires the following NuttX configuration options:
+
+- CONFIG_NET: Enable networking support
+- CONFIG_NET_UDP: Enable UDP support
+- CONFIG_NETUTILS_NTPCLIENT: Enable NTP client support
+- CONFIG_SYSTEM_NTPC: Enable this example
+
+Additional configuration options:
+- CONFIG_NETUTILS_NTPCLIENT_SERVER: NTP server hostname (default: "pool.ntp.org")
+
+Usage
+-----
+
+1. Configure your NuttX build with networking support
+2. Ensure network connectivity is established (e.g., via NSH network commands)
+3. Build and flash the image to your target board
+4. Run the commands:
+   - ``ntpcstart``, ``ntpcstop``, ``ntpcstatus``
+
+**Available Commands:**
+
+- ``ntpcstart`` - Start NTP client in background
+
+- ``ntpcstop`` - Stop the NTP client
+
+- ``ntpcstatus`` - Display NTP client status information
+
+Expected Output
+---------------
+
+**Start NTP client (ntpcstart):**
+::
+
+   Starting NTP client...
+   Using NTP servers: pool.ntp.org
+   NTP client started successfully (task ID: 123)
+   NTP client is now running in the background
+
+**Stop NTP client (ntpcstop):**
+::
+
+   Stopping NTP client...
+   Stopped the NTP daemon
+
+**Show NTP status (ntpcstatus):**
+::
+
+    The number of last samples: 3
+    [0] srv <ip> offset -0.033502142 delay 0.249973549
+    [1] srv <ip> offset -0.020698070 delay 0.029928000
+    [2] srv <ip> offset -0.015448935 delay 0.019815119
+
+**Verify using date command:**
+
+Given network connectivity is available, executing `date` should
+give the proper time and date.
+::
+
+    nsh> ntpcstart
+    Starting NTP client...
+    Using NTP servers: 0.pool.ntp.org;1.pool.ntp.org;2.pool.ntp.org
+    NTP client started successfully (task ID: 10)
+    NTP client is now running in the background
+    nsh> date
+    Fri, Sep 05 18:49:37 2025
+
+Notes
+-----
+
+- This example requires internet connectivity
+- Network must be configured and connected before running this example
+- NTP servers must be accessible (default: pool.ntp.org)
+- UDP port 123 (NTP) must not be blocked by firewalls
+- The example includes error handling for network failures
+- NTP provides more accurate time synchronization than simple time protocols