boards/linum-stm32h753bi: Fix LVGL video memory allocation
Previously, the LVGL example had a workaround in lv_nuttx_fbdev.c to prevent video memory invasion. This fix properly addresses the issue by: - Reducing total SDRAM size from 8MB to 6MB - Moving LTDC base address to 0xC0600000 - Reserving dedicated space for video memory outside NuttX heap This ensures proper memory separation between video buffer and system heap. Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
This commit is contained in:
Jorge Guzman
Xiang Xiao
parent
68d1750c12
commit
7240565ca3
3 changed files with 38 additions and 31 deletions
|
|
@ -15,7 +15,7 @@ Board information
|
|||
=================
|
||||
|
||||
This board was release by Witte Tenology in 2023 and developed based on
|
||||
STM32H753BI microcontroller. The board has 2 expansion connectors used by the LCD display with
|
||||
STM32H753BI microcontroller. The board has 2 expansion connectors used by the LCD display with
|
||||
touchscreen and another for access to other peripherals of microcontroller.
|
||||
|
||||
The board features:
|
||||
|
|
@ -38,7 +38,7 @@ The board features:
|
|||
- 2 On-board CAN-FD Transceiver
|
||||
|
||||
Expansion connector 1 features:
|
||||
- 1 Display RBG 888
|
||||
- 1 Display RBG 565
|
||||
- 1 Capacitive Touchscreen sensor
|
||||
|
||||
Expansion connector 2 features.
|
||||
|
|
@ -61,7 +61,7 @@ The LINUM-STM32H753BI has 3 software controllable LEDs.
|
|||
======= =====
|
||||
LED_R PG2
|
||||
LED_G PG3
|
||||
LED_B PB2
|
||||
LED_B PB2
|
||||
======= =====
|
||||
|
||||
UART/USART
|
||||
|
|
@ -76,7 +76,7 @@ USART1
|
|||
USART1 PINS
|
||||
====== =====
|
||||
TX PB14
|
||||
RX PB15
|
||||
RX PB15
|
||||
====== =====
|
||||
|
||||
The LINUM-STM32H753BI board has two on-board RS-232 transceiver connected to USART2 and USART3.
|
||||
|
|
@ -114,9 +114,9 @@ The LINUM-STM32H753BI board has two on-board RS-485 transceiver connected to USA
|
|||
====== =====
|
||||
TXD PC6
|
||||
RXD PC7
|
||||
DE PG12
|
||||
DE PG12
|
||||
====== =====
|
||||
|
||||
|
||||
SDMMC
|
||||
======
|
||||
|
||||
|
|
@ -137,7 +137,7 @@ The LINUM-STM32H753BI has one SDCard slot connected as below:
|
|||
=============== =====
|
||||
SDCARD_DETECTED PG7
|
||||
SDCARD_PWR_EN PD7
|
||||
=============== =====
|
||||
=============== =====
|
||||
|
||||
ETHERNET
|
||||
========
|
||||
|
|
@ -170,7 +170,7 @@ The LINUM-STM32H753BI board has two on-board CAN-FD transceiver connected to FDC
|
|||
====== =====
|
||||
TXD PH13
|
||||
RXD PH14
|
||||
STD PI2
|
||||
STD PI2
|
||||
====== =====
|
||||
|
||||
====== =====
|
||||
|
|
@ -178,7 +178,7 @@ The LINUM-STM32H753BI board has two on-board CAN-FD transceiver connected to FDC
|
|||
====== =====
|
||||
TXD PB13
|
||||
RXD PB12
|
||||
STD PE3
|
||||
STD PE3
|
||||
====== =====
|
||||
|
||||
USB
|
||||
|
|
@ -212,7 +212,7 @@ The NOR memory used is the W25Q128JV with 16MB
|
|||
CLK PF10
|
||||
NCS PG6
|
||||
======= =====
|
||||
|
||||
|
||||
I2C3
|
||||
============
|
||||
The LINUM-STM32H753BI connects the EEPROM memory and the touchscreen sensor to I2C3.
|
||||
|
|
@ -244,7 +244,7 @@ The touchscreen sensor used is the FT5X06.
|
|||
I2C4
|
||||
=======
|
||||
The I2C4 is available for general use on the expansion connector.
|
||||
|
||||
|
||||
====== =====
|
||||
I2C4 PINS
|
||||
====== =====
|
||||
|
|
@ -356,7 +356,7 @@ The LINUM-STM32H753BI has a buzzer without internal oscillator connected to PB7
|
|||
========= =====
|
||||
GPIO PINS
|
||||
========= =====
|
||||
BUZZER PB7
|
||||
BUZZER PB7
|
||||
========= =====
|
||||
|
||||
==============
|
||||
|
|
@ -541,7 +541,7 @@ Transmiting a file to PC::
|
|||
|
||||
# Using zmodem to receive a file from target
|
||||
my_pc/temp$ rz > /dev/ttyACM0 < /dev/ttyACM0
|
||||
Receiving: nuttx_logo.txt
|
||||
Receiving: nuttx_logo.txt
|
||||
Bytes received: 1942/ 1942 BPS:124544
|
||||
|
||||
Transfer complete
|
||||
|
|
@ -672,7 +672,7 @@ In your pc you will be able connect to target using telnet and access their shel
|
|||
nsh> exit
|
||||
Connection closed by foreign host.
|
||||
$
|
||||
|
||||
|
||||
Testing wget to download file from server::
|
||||
|
||||
# PC: Creating a http server and sharing local folder.
|
||||
|
|
@ -682,7 +682,7 @@ Testing wget to download file from server::
|
|||
Serving HTTP on 0.0.0.0 port 80 (http://0.0.0.0:80/) ...
|
||||
10.42.0.2 - - [28/Apr/2024 16:14:39] "GET /nuttx_logo.txt HTTP/1.0" 200 -
|
||||
|
||||
# Using wget on target
|
||||
# Using wget on target
|
||||
nsh> mount -t tmpfs /tmp
|
||||
nsh> cd /tmp
|
||||
nsh> pwd
|
||||
|
|
@ -707,7 +707,7 @@ Enable the USB Mass Storage with the command **msconn**::
|
|||
After that check if your PC recognized the usb driver::
|
||||
|
||||
$ sudo dmesg | tail
|
||||
[sudo] password for jaga:
|
||||
[sudo] password for jaga:
|
||||
[27219.361934] usbcore: registered new interface driver uas
|
||||
[27220.378231] scsi 0:0:0:0: Direct-Access NuttX Mass Storage 0101 PQ: 0 ANSI: 2
|
||||
[27220.378646] sd 0:0:0:0: Attached scsi generic sg0 type 0
|
||||
|
|
@ -817,7 +817,7 @@ Configures the board to use the SPI4 and enables RFID driver with MFRC522::
|
|||
lvgl
|
||||
----
|
||||
|
||||
Configures the board to use display of 7 inch with lvgl example. The touch screen functionality is implemented using
|
||||
Configures the board to use display of 7 inch with lvgl example. The touch screen functionality is implemented using
|
||||
the FT5X06 capacitive touch controller connected to I2C3 interface, with interrupt handling configured on pin PH9 for touch event detection.
|
||||
|
||||
To verify if the touch controller is functioning correctly, use the **tc** command.::
|
||||
|
|
@ -886,17 +886,12 @@ To verify if the display is functioning correctly, use the **fb** command. You s
|
|||
5: (465,270) ( 94, 60)
|
||||
Test finished
|
||||
|
||||
Once the **fd** command work, run the lvgl exemple. ::
|
||||
Once the **fd** command works, run the lvgl examples. ::
|
||||
|
||||
nsh> lvgldemo
|
||||
nsh> lvgldemo benchmark
|
||||
|
||||
**WARNING:** This example at the moment is not working correctly yet and have a bug fix to be done.
|
||||
In the lvgl file **./apps/graphics/lvgl/lvgl/src/drivers/nuttx/lv_nuttx_fbdev.c**
|
||||
search the function **lv_nuttx_fbdev_set_file** and modify line 156 as follows::
|
||||
|
||||
dsc->mem_off_screen = malloc(data_size);
|
||||
to
|
||||
dsc->mem_off_screen = (void*)0xC0000000;
|
||||
**WARNING:** For this example, the total SDRAM size was reduced from 8M to 6M and the LTDC base address was moved to address 0xC0600000 to avoid video memory invasion since the SDRAM was mapped to use the nuttx heap. If using the example with 2 layers, the reserved value will need to be doubled.
|
||||
|
||||
tone
|
||||
----
|
||||
|
|
|
|||
|
|
@ -41,12 +41,14 @@ CONFIG_INPUT_FT5X06=y
|
|||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LIBM=y
|
||||
CONFIG_LINE_MAX=64
|
||||
CONFIG_LV_USE_CLIB_MALLOC=y
|
||||
CONFIG_LV_USE_CLIB_SPRINTF=y
|
||||
CONFIG_LV_USE_CLIB_STRING=y
|
||||
CONFIG_LV_FONT_MONTSERRAT_24=y
|
||||
CONFIG_LV_MEM_SIZE_KILOBYTES=128
|
||||
CONFIG_LV_USE_DEMO_BENCHMARK=y
|
||||
CONFIG_LV_USE_DEMO_WIDGETS=y
|
||||
CONFIG_LV_USE_NUTTX=y
|
||||
CONFIG_LV_USE_NUTTX_TOUCHSCREEN=y
|
||||
CONFIG_LV_USE_PERF_MONITOR=y
|
||||
CONFIG_LV_USE_SYSMON=y
|
||||
CONFIG_MM_REGIONS=5
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
|
@ -69,8 +71,8 @@ CONFIG_START_YEAR=2011
|
|||
CONFIG_STM32H7_FMC=y
|
||||
CONFIG_STM32H7_I2C3=y
|
||||
CONFIG_STM32H7_LTDC=y
|
||||
CONFIG_STM32H7_LTDC_FB_BASE=0xC0000000
|
||||
CONFIG_STM32H7_LTDC_FB_SIZE=1228800
|
||||
CONFIG_STM32H7_LTDC_FB_BASE=0xC0600000
|
||||
CONFIG_STM32H7_LTDC_FB_SIZE=2097152
|
||||
CONFIG_STM32H7_PWR=y
|
||||
CONFIG_STM32H7_RTC=y
|
||||
CONFIG_STM32H7_USART1=y
|
||||
|
|
@ -78,4 +80,5 @@ CONFIG_SYSTEM_NSH=y
|
|||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_TESTING_RAMTEST=y
|
||||
CONFIG_USART1_SERIAL_CONSOLE=y
|
||||
CONFIG_USEC_PER_TICK=1000
|
||||
CONFIG_VIDEO_FB=y
|
||||
|
|
|
|||
|
|
@ -497,7 +497,16 @@
|
|||
# endif
|
||||
#endif
|
||||
|
||||
#define BOARD_SDRAM1_SIZE (8*1024*1024)
|
||||
/* BOARD_SDRAM1_SIZE - With ltdc enabled, we reserve the last 2M
|
||||
* of SDRAM for use with the LTDC framebuffer. If using double buffering,
|
||||
* this value will need to be doubled.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_STM32H7_LTDC
|
||||
# define BOARD_SDRAM1_SIZE (6*1024*1024)
|
||||
#else
|
||||
# define BOARD_SDRAM1_SIZE (8*1024*1024)
|
||||
#endif
|
||||
|
||||
/* BOARD_FMC_SDCR1 - Initial value for SDRAM control registers for SDRAM
|
||||
* bank 1. Note bank 2 isn't used!
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue