luchianmihai/walnux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

boards/risc-v/esp32c6: Remove board support for the NCV7410

Browse source 
The NCV7410 driver will be replaced. This commit removes current support for
the NCV7410 driver from the board level.

Signed-off-by: michal matias <mich4l.matias@gmail.com>
This commit is contained in:
michal matias 2025-08-24 22:45:11 +02:00 • committed by Xiang Xiao
parent be36d42da5
commit 76c2038d97
7 changed files with 0 additions and 358 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

75
boards/risc-v/esp32c6/common/include/esp_board_ncv7410.h
View file

@ -1,75 +0,0 @@
/****************************************************************************
* boards/risc-v/esp32c6/common/include/esp_board_ncv7410.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_NCV7410_H
#define __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_NCV7410_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: board_ncv7410_initialize
*
* Description:
* Initialize and register the NCV7410 10BASE-T1S network driver.
*
* Input Parameters:
* None
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
#ifdef CONFIG_NCV7410
int board_ncv7410_initialize(void);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_RISCV_ESP32C6_COMMON_INCLUDE_ESP_BOARD_NCV7410_H */

4
boards/risc-v/esp32c6/common/src/Make.defs
View file

@ -86,10 +86,6 @@ ifeq ($(CONFIG_SENSORS_MPU60X0),y)
CSRCS += esp_board_mpu60x0.c
endif
ifeq ($(CONFIG_NCV7410),y)
CSRCS += esp_board_ncv7410.c
endif
ifeq ($(CONFIG_MMCSD_SPI),y)
CSRCS += esp_board_mmcsd.c
endif

105
boards/risc-v/esp32c6/common/src/esp_board_ncv7410.c
View file

@ -1,105 +0,0 @@
/****************************************************************************
* boards/risc-v/esp32c6/common/src/esp_board_ncv7410.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdio.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/spi/spi.h>
#include <nuttx/net/ncv7410.h>
#include <arch/board/board.h>
#include "espressif/esp_spi.h"
#include "espressif/esp_gpio.h"
/****************************************************************************
* Private Data
****************************************************************************/
static struct ncv7410_config_s g_ncv7410_config =
{
.id = SPIDEV_ETHERNET(0)
};
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_ncv7410_initialize
*
* Description:
* Initialize and register the NCV7410 10BASE-T1S network driver.
*
* Input Parameters:
* None
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
void board_ncv7410_initialize(void)
{
struct spi_dev_s *spi;
int irq;
int ret;
spi = esp_spibus_initialize(ESPRESSIF_SPI2);
if (!spi)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize SPI port %d\n", ESPRESSIF_SPI2);
return;
}
/* initialize the interrupt GPIO pin as input with PULLUP */
esp_configgpio(CONFIG_NCV7410_INT_PIN, INPUT_FUNCTION_2 | PULLUP);
irq = ESP_PIN2IRQ(CONFIG_NCV7410_INT_PIN);
/* Bind the SPI port and interrupt to the NCV7410 driver */
ret = ncv7410_initialize(spi, irq, &g_ncv7410_config);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to bind interrupt and SPI port to the NCV7410"
" network driver: %d\n", ret);
return;
}
/* driver attaches function to the interrupt, now it can be enabled */
esp_gpioirqenable(irq, FALLING);
syslog(LOG_INFO,
"Bound interrupt and SPI port to the NCV7410 network driver\n");
}

75
boards/risc-v/esp32c6/esp32c6-devkitc/configs/ncv7410/defconfig
View file

@ -1,75 +0,0 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
CONFIG_ARCH="risc-v"
CONFIG_ARCH_BOARD="esp32c6-devkitc"
CONFIG_ARCH_BOARD_COMMON=y
CONFIG_ARCH_BOARD_ESP32C6_DEVKITC=y
CONFIG_ARCH_CHIP="esp32c6"
CONFIG_ARCH_CHIP_ESP32C6=y
CONFIG_ARCH_CHIP_ESP32C6WROOM1=y
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_RISCV=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_LOOPSPERMSEC=15000
CONFIG_BUILTIN=y
CONFIG_ESPRESSIF_ESP32C6=y
CONFIG_ESPRESSIF_GPIO_IRQ=y
CONFIG_ESPRESSIF_SPI2=y
CONFIG_ESPRESSIF_SPI2_CSPIN=0
CONFIG_ESPRESSIF_SPI_SWCS=y
CONFIG_FS_PROCFS=y
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_IOB_THROTTLE=24
CONFIG_LIBC_PERROR_STDOUT=y
CONFIG_LIBC_STRERROR=y
CONFIG_MM_DEFAULT_ALIGNMENT=0
CONFIG_NCV7410=y
CONFIG_NCV7410_INT_PIN=5
CONFIG_NET=y
CONFIG_NETDB_DNSCLIENT=y
CONFIG_NETDEV_LATEINIT=y
CONFIG_NETDEV_PHY_IOCTL=y
CONFIG_NET_BROADCAST=y
CONFIG_NET_ICMP_SOCKET=y
CONFIG_NET_ICMPv6=y
CONFIG_NET_IPFRAG=y
CONFIG_NET_IPv6=y
CONFIG_NET_STATISTICS=y
CONFIG_NET_TCP=y
CONFIG_NET_TCP_DELAYED_ACK=y
CONFIG_NET_TCP_WRITE_BUFFERS=y
CONFIG_NET_UDP=y
CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=6
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_NSH_STRERROR=y
CONFIG_PREALLOC_TIMERS=0
CONFIG_PTHREAD_MUTEX_TYPES=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_BACKTRACE=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_WAITPID=y
CONFIG_SPITOOL_MINBUS=2
CONFIG_START_DAY=29
CONFIG_START_MONTH=11
CONFIG_START_YEAR=2019
CONFIG_SYSTEM_DHCPC_RENEW=y
CONFIG_SYSTEM_DUMPSTACK=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_PING=y
CONFIG_SYSTEM_SPITOOL=y
CONFIG_TESTING_GETPRIME=y
CONFIG_TESTING_OSTEST=y
CONFIG_UART0_SERIAL_CONSOLE=y

12
boards/risc-v/esp32c6/esp32c6-devkitc/src/esp32c6_bringup.c
View file

@ -129,10 +129,6 @@
# include "espressif/esp_sha.h"
#endif
#ifdef CONFIG_NCV7410
# include "esp_board_ncv7410.h"
#endif
#ifdef CONFIG_MMCSD_SPI
# include "esp_board_mmcsd.h"
#endif
@ -503,14 +499,6 @@ int esp_bringup(void)
}
#endif
#ifdef CONFIG_NCV7410
ret = board_ncv7410_initialize();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: esp_ncv7410_initialize failed: %d\n", ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.

75
boards/risc-v/esp32c6/esp32c6-devkitm/configs/ncv7410/defconfig
View file

@ -1,75 +0,0 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
CONFIG_ARCH="risc-v"
CONFIG_ARCH_BOARD="esp32c6-devkitm"
CONFIG_ARCH_BOARD_COMMON=y
CONFIG_ARCH_BOARD_ESP32C6_DEVKITM=y
CONFIG_ARCH_CHIP="esp32c6"
CONFIG_ARCH_CHIP_ESP32C6=y
CONFIG_ARCH_CHIP_ESP32C6MINI1=y
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_RISCV=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_LOOPSPERMSEC=15000
CONFIG_BUILTIN=y
CONFIG_ESPRESSIF_ESP32C6=y
CONFIG_ESPRESSIF_GPIO_IRQ=y
CONFIG_ESPRESSIF_SPI2=y
CONFIG_ESPRESSIF_SPI2_CSPIN=0
CONFIG_ESPRESSIF_SPI_SWCS=y
CONFIG_FS_PROCFS=y
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_IOB_THROTTLE=24
CONFIG_LIBC_PERROR_STDOUT=y
CONFIG_LIBC_STRERROR=y
CONFIG_MM_DEFAULT_ALIGNMENT=0
CONFIG_NCV7410=y
CONFIG_NCV7410_INT_PIN=5
CONFIG_NET=y
CONFIG_NETDB_DNSCLIENT=y
CONFIG_NETDEV_LATEINIT=y
CONFIG_NETDEV_PHY_IOCTL=y
CONFIG_NET_BROADCAST=y
CONFIG_NET_ICMP_SOCKET=y
CONFIG_NET_ICMPv6=y
CONFIG_NET_IPFRAG=y
CONFIG_NET_IPv6=y
CONFIG_NET_STATISTICS=y
CONFIG_NET_TCP=y
CONFIG_NET_TCP_DELAYED_ACK=y
CONFIG_NET_TCP_WRITE_BUFFERS=y
CONFIG_NET_UDP=y
CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=6
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_NSH_STRERROR=y
CONFIG_PREALLOC_TIMERS=0
CONFIG_PTHREAD_MUTEX_TYPES=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_BACKTRACE=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_WAITPID=y
CONFIG_SPITOOL_MINBUS=2
CONFIG_START_DAY=29
CONFIG_START_MONTH=11
CONFIG_START_YEAR=2019
CONFIG_SYSTEM_DHCPC_RENEW=y
CONFIG_SYSTEM_DUMPSTACK=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_PING=y
CONFIG_SYSTEM_SPITOOL=y
CONFIG_TESTING_GETPRIME=y
CONFIG_TESTING_OSTEST=y
CONFIG_UART0_SERIAL_CONSOLE=y

12
boards/risc-v/esp32c6/esp32c6-devkitm/src/esp32c6_bringup.c
View file

@ -113,10 +113,6 @@
# include "espressif/esp_sdm.h"
#endif
#ifdef CONFIG_NCV7410
# include "esp_board_ncv7410.h"
#endif
#include "esp32c6-devkitm.h"
/****************************************************************************
@ -425,14 +421,6 @@ int esp_bringup(void)
}
#endif
#ifdef CONFIG_NCV7410
ret = board_ncv7410_initialize();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: esp_ncv7410_initialize failed: %d\n", ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.