luchianmihai/walnux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Initial support for the Kinetis L family and the Freedom KL25Z board from Alan Carvalho de Assis

Browse source
This commit is contained in:
Gregory Nutt 2013-04-16 08:48:42 -06:00
parent 9ffc333b21
commit 774664e1df
16 changed files with 3222 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
configs/freedom-kl25z/Kconfig Normal file
View file

@ -0,0 +1,7 @@
#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
if ARCH_BOARD_FREEDOM_KL25Z
endif

383
configs/freedom-kl25z/README.txt Normal file
View file

@ -0,0 +1,383 @@
README.txt
==========
This is the README file for the port of NuttX to the Freescale
Freedom K25Z board. This board has the K25Z120LE3AN chip
with a built-in NuLink debugger.
Contents
========
- Development Environment
- GNU Toolchain Options
- NuttX Buildroot Toolchain
- LEDs
- Serial Console
- Debugging
- NuTiny-specific Configuration Options
- Configurations
Development Environment
=======================
Either Linux or Cygwin on Windows can be used for the development environment.
The source has been built only using the GNU toolchain (see below). Other
toolchains will likely cause problems.
GNU Toolchain Options
=====================
As of this writing, all testing has been performed using the NuttX buildroot
toolchain described below. I have also verified the build using the
CodeSourcery GCC toolchain for windows. Most any contemporary EABI GCC
toolchain should work will a little tinkering.
NuttX Buildroot Toolchain
=========================
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
different from the default in your PATH variable).
If you have no Cortex-M0 toolchain, one can be downloaded from the NuttX
SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
cd tools
./configure.sh freedom-kl25z/<sub-dir>
2. Download the latest buildroot package into <some-dir>
3. unpack the buildroot tarball. The resulting directory may
have versioning information on it like buildroot-x.y.z. If so,
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
4. cd <some-dir>/buildroot
5. cp configs/cortexm0-eabi-defconfig-4.6.3 .config
6. make oldconfig
7. make
8. Edit setenv.h, if necessary, so that the PATH variable includes
the path to the newly built binaries.
See the file configs/README.txt in the buildroot source tree. That has more
details PLUS some special instructions that you will need to follow if you are
building a Cortex-M3 toolchain for Cygwin under Windows.
LEDs
====
The NuTiny has a single green LED that can be controlled from sofware.
This LED is connected to PIN17. It is pulled high so a low value will
illuminate the LED.
If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
NuTiny. The following definitions describe how NuttX controls the LEDs:
SYMBOL Meaning LED state
Initially all LED is OFF
------------------- ----------------------- ------------- ------------
LED_STARTED NuttX has been started LED ON
LED_HEAPALLOCATE Heap has been allocated LED ON
LED_IRQSENABLED Interrupts enabled LED ON
LED_STACKCREATED Idle stack created LED ON
LED_INIRQ In an interrupt LED should glow
LED_SIGNAL In a signal handler LED might glow
LED_ASSERTION An assertion failed LED ON while handling the assertion
LED_PANIC The system has crashed LED Blinking at 2Hz
LED_IDLE K25Z1XX is in sleep mode (Optional, not used)
Serial Console
==============
As with most NuttX configurations, the Freedom K25Z configurations
depend on having a serial console to interact with the software. The
Freedom K25Z, however, has not on-board RS-232 drivers so will be
necessary to connect the Freedom K25Z UART pins to an external
RS-232 driver board or TTL-to-Serial USB adaptor.
By default UART1 is used as the serial console on these boards. K25Z120LE3AN
is provided as an LQFP48 package and, for this case, the UART1 RX signal
(RXD1) is on PB.4, pin 8, and the TX signal (TXD1) is on PB.5, pin 9.
These pins are available on the Freedom K25Z JP5.
NOTE: The TX vs RX labeling may be confusing. On one RS-232 driver board,
I had to connect the K25Z120 TXD0 pin to the driver boards RXD pin. How
confusing!
UART0 is an alternative that can be selected by modifying the default
configuation. UART0 RX (RXD0) is on PB.0, pin 17, and the TX signal (TXD0)
is on PB.1, pin 18. These pins are available on the Freedom K25Z JP1.
NOTE: PB.0, pin 17, is also used to control the user LED on board (labeled
"IO"). CONFIG_ARCH_LED should not be selected if UART0 is used.
The K25Z120LE3AN does not support UART2.
Debugging
=========
The Freedom K25Z includes a built-in NuLink debugger. Unfortunately,
full debug support is available only with the Keil and IAR toolchains.
There is, however, a free program called ICP (In-Circuit Programmer). It
can be used to burn programs into FLASH (aka APROM).
The ICP program can also be used to burn an ISP program into LDROM. The
ISP (In-System Programmer) is available free from the Nuvton website.
Then NuttX build does not set the configuration words at 0x0030000-0x00300004.
You should uncheck the Config box when burning APROM or the previous contents
of the configuration words will be erased.
NuTiny-specific Configuration Options
=====================================
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
CONFIG_ARCH=arm
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH_ARM=y
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_CORTEXM0=y
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CHIP=kl
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
chip:
CONFIG_ARCH_CHIP_K25Z120LE3AN=y
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_BOARD=freedom-kl25z (for the Freescale FRDM-KL25Z development board)
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_BOARD_FREEDOM_K25Z128=y
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
CONFIG_DRAM_SIZE=16384 (16Kb)
CONFIG_DRAM_START - The start address of installed DRAM
CONFIG_DRAM_START=0x20000000
CONFIG_ARCH_IRQPRIO - The Cortex-M0 supports interrupt prioritization
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
cause a 100 second delay during boot-up. This 100 second delay
serves no purpose other than it allows you to calibratre
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
the delay actually is 100 seconds.
Individual subsystems can be enabled as follows. These settings are for
all of the K25Z100/120 line and may not be available for the K25Z120LE3AN
in particular:
AHB
---
CONFIG_KL_PDMA Peripheral DMA
CONFIG_KL_FMC Flash memory
CONFIG_KL_EBI External bus interface
APB1
----
CONFIG_KL_WDT Watchdog timer
CONFIG_KL_RTC Real time clock (RTC)
CONFIG_KL_TMR0 Timer0
CONFIG_KL_TMR1 Timer1
CONFIG_KL_I2C0 I2C interface
CONFIG_KL_SPI0 SPI0 master/slave
CONFIG_KL_SPI1 SPI1 master/slave
CONFIG_KL_PWM0 PWM0
CONFIG_KL_PWM1 PWM1
CONFIG_KL_PWM2 PWM2
CONFIG_KL_PWM3 PWM3
CONFIG_KL_UART0 UART0
CONFIG_KL_USBD USB 2.0 FS device controller
CONFIG_KL_ACMP Analog comparator
CONFIG_KL_ADC Analog-digital-converter (ADC)
APB2
---
CONFIG_KL_PS2 PS/2 interface
CONFIG_KL_TIMR2 Timer2
CONFIG_KL_TIMR3 Timer3
CONFIG_KL_I2C1 I2C1 interface
CONFIG_KL_SPI2 SPI2 master/slave
CONFIG_KL_SPI3 SPI3 master/slave
CONFIG_KL_PWM4 PWM4
CONFIG_KL_PWM5 PWM5
CONFIG_KL_PWM6 PWM6
CONFIG_KL_PWM7 PWM7
CONFIG_KL_UART1 UART1
CONFIG_KL_UART2 UART2
CONFIG_KL_I2S I2S interface
K25Z1XX specific device driver settings
CONFIG_UARTn_SERIAL_CONSOLE - Selects the UARTn (n=0,1,2) for the
console and ttys0.
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer for UARTn.
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
for UARTn.
CONFIG_UARTn_BAUD - The configure BAUD of UARTn,
CONFIG_UARTn_BITS - The number of bits. Must be 5, 6, 7, or 8.
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_UARTn_2STOP - Two stop bits
Configurations
==============
Each FREEDOM-KL25Z configuration is maintained in a sub-directory and
can be selected as follow:
cd tools
./configure.sh freedom-kl25z/<subdir>
cd -
. ./setenv.sh
If this is a Windows native build, then configure.bat should be used
instead of configure.sh:
configure.bat freedom-kl25z\<subdir>
Where <subdir> is one of the following:
ostest:
------
This configuration directory, performs a simple OS test using
apps/examples/ostest.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. Default toolchain:
CONFIG_HOST_WINDOWS=y : Builds under Windows
CONFIG_WINDOWS_CYGWIN=y : Using Cygwin
CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
3. Serial Console. A serial console is required to see the OS test
output. The serial console is configured on UART1 which is available
on JP5:
UART1 RX signal (RXD1) is on PB.4, pin 8, and
UART1 TX signal (TXD1) is on PB.5, pin 9.
nsh:
---
Configures the NuttShell (nsh) located at apps/examples/nsh. The
Configuration enables the serial interfaces on UART1. Support for
builtin applications is disabled.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. By default, this configuration uses the CodeSourcery toolchain
for Windows and builds under Cygwin (or probably MSYS). That
can easily be reconfigured, of course.
CONFIG_HOST_WINDOWS=y : Builds under Windows
CONFIG_WINDOWS_CYGWIN=y : Using Cygwin
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
3. Serial Console. A serial console is necessary to interrupt with
NSH. The serial console is configured on UART1 which is available
on JP5:
UART1 RX signal (RXD1) is on PB.4, pin 8, and
UART1 TX signal (TXD1) is on PB.5, pin 9.
It is possible to configure NSH to use a USB serial console instead
of an RS-232 serial console. However, that configuration has not
been impelmented as of this writing.
4. Memory Usage. The size command gives us the static memory usage.
This is what I get:
$ size nuttx
text data bss dec hex filename
35037 106 1092 36235 8d8b nuttx
And we can get the runtime memory usage from the NSH free command:
NuttShell (NSH) NuttX-6.25
nsh> free
total used free largest
Mem: 14160 3944 10216 10216
nsh>
Summary:
- This slightly tuned NSH example uses 34.2KB of FLASH leaving 93.8KB
of FLASH (72%) free from additional application development.
I did not do all of the arithmetic, but it appears to me that of this
34+KB of FLASH usage, probably 20-30% of the FLASH is used by libgcc!
libgcc has gotten very fat!
- Static SRAM usage is about 1.2KB (<4%).
- At run time, 10.0KB of SRAM (62%) is still available for additional
applications. Most of the memory used at runtime is allocated I/O
buffers and the stack for the NSH main thread (1.5KB).
There is probably enough free memroy to support 3 or 4 application
threads in addition to NSH.

286
configs/freedom-kl25z/include/board.h Normal file
View file

@ -0,0 +1,286 @@
/************************************************************************************
* configs/kwikstik-k40/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The Kwikstik-K40 has a 4MHz crystal on board */
#undef BOARD_EXTCLOCK /* Crystal */
#define BOARD_EXTAL_FREQ 8000000 /* 8MHz crystal frequency (REFCLK) */
#define BOARD_HCLK_FREQUENCY BOARD_EXTAL_FREQ
#define BOARD_XTAL32_FREQ 32768 /* 32KHz RTC Oscillator */
/* PLL Configuration. NOTE: Only even frequency crystals are supported that will
* produce a 2MHz reference clock to the PLL.
*
* PLL Input frequency: PLLIN = REFCLK/PRDIV = 4MHz/2 = 2MHz
* PLL Output frequency: PLLOUT = PLLIN*VDIV = 2Mhz*48 = 96MHz
* MCG Frequency: PLLOUT = 96MHz
*/
#define BOARD_PRDIV 2 /* PLL External Reference Divider */
#define BOARD_VDIV 48 /* PLL VCO Divider (frequency multiplier) */
#define BOARD_PLLIN_FREQ (BOARD_EXTAL_FREQ / BOARD_PRDIV)
#define BOARD_PLLOUT_FREQ (BOARD_PLLIN_FREQ * BOARD_VDIV)
#define BOARD_MCG_FREQ BOARD_PLLOUT_FREQ
/* SIM CLKDIV1 dividers */
#define BOARD_OUTDIV1 1 /* Core = MCG, 96MHz */
#define BOARD_OUTDIV2 2 /* Bus = MCG/2, 48MHz */
#define BOARD_OUTDIV3 2 /* FlexBus = MCG/2, 48MHz */
#define BOARD_OUTDIV4 4 /* Flash clock = MCG/4, 24MHz */
#define BOARD_CORECLK_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV1)
#define BOARD_BUS_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV2)
#define BOARD_FLEXBUS_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV3)
#define BOARD_FLASHCLK_FREQ (BOARD_MCG_FREQ / BOARD_OUTDIV4)
/* SDHC clocking ********************************************************************/
/* SDCLK configurations corresponding to various modes of operation. Formula is:
*
* SDCLK frequency = (base clock) / (prescaler * divisor)
*
* The SDHC module is always configure configured so that the core clock is the base
* clock.
*/
/* Identification mode: 400KHz = 96MHz / ( 16 * 15) */
#define BOARD_SDHC_IDMODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV16
#define BOARD_SDHC_IDMODE_DIVISOR SDHC_SYSCTL_DVS_DIV(15)
/* MMC normal mode: 16MHz = 96MHz / (2 * 3) */
#define BOARD_SDHC_MMCMODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV2
#define BOARD_SDHC_MMCMODE_DIVISOR SDHC_SYSCTL_DVS_DIV(3)
/* SD normal mode (1-bit): 16MHz = 96MHz / (2 * 3) */
#define BOARD_SDHC_SD1MODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV2
#define BOARD_SDHC_SD1MODE_DIVISOR SDHC_SYSCTL_DVS_DIV(3)
/* SD normal mode (4-bit): 24MHz = 96MHz / (2 * 2) (with DMA)
* SD normal mode (4-bit): 16MHz = 96MHz / (2 * 3) (no DMA)
*/
#ifdef CONFIG_SDIO_DMA
# define BOARD_SDHC_SD4MODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV2
# define BOARD_SDHC_SD4MODE_DIVISOR SDHC_SYSCTL_DVS_DIV(2)
#else
//# define BOARD_SDHC_SD4MODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV2
//# define BOARD_SDHC_SD4MODE_DIVISOR SDHC_SYSCTL_DVS_DIV(3)
# define BOARD_SDHC_SD4MODE_PRESCALER SDHC_SYSCTL_SDCLKFS_DIV16
# define BOARD_SDHC_SD4MODE_DIVISOR SDHC_SYSCTL_DVS_DIV(15)
#endif
/* LED definitions ******************************************************************/
/* The KwikStik-K40 board has no MCU driven, GPIO-based LEDs */
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
#define LED_IRQSENABLED 2
#define LED_STACKCREATED 3
#define LED_INIRQ 4
#define LED_SIGNAL 5
#define LED_ASSERTION 6
#define LED_PANIC 7
/* Button definitions ***************************************************************/
/* The KwikStik-K40 board has no standard GPIO contact buttons */
/* Alternative pin resolution *******************************************************/
/* If there are alternative configurations for various pins in the
* kinetis_k40pinmux.h header file, those alternative pins will be labeled with a
* suffix like _1, _2, etc. The logic in this file must select the correct pin
* configuration for the board by defining a pin configuration (with no suffix) that
* maps to the correct alternative.
*/
/* On-Board Connections
*
* ------------------- -------------------------- -------- -------------------
* FEATURE CONNECTION PORT/PIN PIN FUNCTION
* ------------------- -------------------------- -------- -------------------
* Audio Jack Output Audio Amp On PTE28 PTE28
* Audio Output DAC1_OUT DAC1_OUT
* Volume Up PTD10 PTD10
* Volume Down PTD11 PTD11
* Buzzer Audio Out PTA8 FTM1_CH0
* Microphone Microphone input PTA7 ADC0_SE10
* SD Card Slot SD Clock PTE2 SDHC0_DCLK
* SD Command PTE3 SDHC0_CMD
* SD Data0 PTD12 SDHC0_D4
* SD Data1 PTD13 SDHC0_D5
* SD Data2 PTD14 SDHC0_D6
* SD Data3 PTD15 SDHC0_D7
* SD Card Detect PTE27 PTE27
* SD Card On PTE6 PTE6
* Infrared Port IR Transmit PTE4 IR_TX
* IR Receive PTA13 CMP2_IN0
* Touch Pads E1 / Touch PTB0 TSI0_CH0
* E2 / Touch PTA4 TSI0_CH5
* E3 / Touch PTA24 PTA24
* E4 / Touch PTA25 PTA25
* E5 / Touch PTA26 PTA26
* E6 / Touch PTA27 PTA27
*/
#define PIN_FTM1_CH0 PIN_FTM1_CH0_1
/* Connections via the General Purpose Tower Plug-in (TWRPI) Socket
* ------------------- -------------------------- -------- -------------------
* FEATURE CONNECTION PORT/PIN PIN FUNCTION
* ------------------- -------------------------- -------- -------------------
* General Purpose TWRPI AN0 (J8 Pin 8) ? ADC0_DP0/ADC1_DP3
* TWRPI Socket TWRPI AN1 (J8 Pin 9) ? ADC0_DM0/ADC1_DM3
* TWRPI AN2 (J8 Pin 12) ? ADC1_DP0/ADC0_DP3
* TWRPI ID0 (J8 Pin 17) ? ADC0_DP1
* TWRPI ID1 (J8 Pin 18) ? ADC0_DM1
* TWRPI I2C SCL (J9 Pin 3) PTC10 I2C1_SCL
* TWRPI I2C SDA (J9 Pin 4) PTC11 I2C1_SDA
* TWRPI SPI MISO (J9 Pin 9) PTB23 SPI2_SIN
* TWRPI SPI MOSI (J9 Pin 10) PTB22 SPI2_SOUT
* TWRPI SPI SS (J9 Pin 11) PTB20 SPI2_PCS0
* TWRPI SPI CLK (J9 Pin 12) PTB21 SPI2_SCK
* TWRPI GPIO0 (J9 Pin 15) PTC12 PTC12
* TWRPI GPIO1 (J9 Pin 16) PTB9 PTB9
* TWRPI GPIO2 (J9 Pin 17) PTB10 PTB10
* TWRPI GPIO3 (J9 Pin 18) PTC5 PTC5
* TWRPI GPIO4 (J9 Pin 19) PTA5 PTA5
*/
#define PIN_I2C1_SCL PIN_I2C1_SCL_1
#define PIN_I2C1_SDA PIN_I2C1_SDA_1
#define PIN_SPI2_SIN PIN_SPI2_SIN_1
#define PIN_SPI2_SOUT PIN_SPI2_SOUT_1
#define PIN_SPI2_PCS0 PIN_SPI2_PCS0_1
#define PIN_SPI2_SCK PIN_SPI2_SCK_1
/* Connections via the Tower Primary Connector Side A
* --- -------------------- --------------------------------
* PIN NAME USAGE
* --- -------------------- --------------------------------
* A9 GPIO9 / CTS1 PTE10/UART_CTS
* A43 RXD1 PTE9/UART_RX
* A44 TXD1 PTE8/UART_TX
* A63 RSTOUT_b PTA9/FTM1_CH1
*/
#define PIN_UART5_CTS PIN_UART5_CTS_2
#define PIN_FTM1_CH1 PIN_FTM1_CH1_1
/* Connections via the Tower Primary Connector Side B
* --- -------------------- --------------------------------
* PIN NAME USAGE
* --- -------------------- --------------------------------
* B21 GPIO1 / RTS1 PTE7/UART_RTS
* B37 PWM7 PTA8/FTM1_CH0
* B38 PWM6 PTA9/FTM1_CH1
* B41 CANRX0 PTE25/CAN1_RX
* B42 CANTX0 PTE24/CAN1_TX
* B44 SPI0_MISO PTA17/SPI0_SIN
* B45 SPI0_MOSI PTA16/SPI0_SOUT
* B46 SPI0_CS0_b PTA14/SPI0_PCS0
* B48 SPI0_CLK PTA15/SPI0_SCK
* B50 SCL1 PTE1/I2C1_SCL
* B51 SDA1 PTE0/I2C1_SDA
* B52 GPIO5 / SD_CARD_DET PTA16
*/
#define PIN_UART3_RTS PIN_UART3_RTS_3
#define PIN_CAN1_RX PIN_CAN1_RX_2
#define PIN_CAN1_TX PIN_CAN1_TX_2
#define PIN_SPI0_SIN PIN_SPI0_SIN_1
#define PIN_SPI0_SOUT PIN_SPI0_SOUT_1
#define PIN_SPI0_SCK PIN_SPI0_SCK_1
#define PIN_SPI0_PCS0 PIN_SPI0_PCS0_1
#define PIN_I2C1_SCL PIN_I2C1_SCL_2
#define PIN_I2C1_SDA PIN_I2C1_SDA_2
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: kinetis_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void kinetis_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

170
configs/freedom-kl25z/include/board.h_orig Normal file
View file

@ -0,0 +1,170 @@
/************************************************************************************
* configs/freedom-kl25z/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_FREEDOM_KL25Z_INCLUDE_BOARD_H
#define __CONFIGS_FREEDOM_KL25Z_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* Crystal frequencies */
#define BOARD_XTALHI_FREQUENCY 12000000
#define BOARD_XTALLO_FREQUENCY 32768
/* PLL: The PLL must be 48MHz x N times when using USB
*
* FOUT = FIN x (NF/NR) x (1 / NO)
* FIN = Input reference clock frequency
* NF = Feedback divider
* = (FB_DV + 2)
* NR = Input divider
* = (IN_DV + 2)
* NO = 1 if OUT_DV == 0
* 2 if OUT_DV == 1 or 2
* 4 if OUT_DV == 3
*
* FOUT = 12000000 x 48 / 3 / 4
* = 48MHz
*/
#define BOARD_PLL_FIN BOARD_XTALHI_FREQUENCY
#define BOARD_PLL_FB_DV 46
#define BOARD_PLL_NF (BOARD_PLL_FB_DV+2)
#define BOARD_PLL_IN_DV 1
#define BOARD_PLL_NR (BOARD_PLL_IN_DV+2)
#define BOARD_PLL_OUT_DV 3
#define BOARD_PLL_NO 4
#define BOARD_PLL_FOUT \
(BOARD_PLL_FIN * BOARD_PLL_NF / BOARD_PLL_NR / BOARD_PLL_NO)
/* HCLK. FOUT is the HCLK source clock. */
#define BOARD_HCLK_N 1
#define BOARD_HCLK_FREQUENCY (BOARD_PLL_FOUT / BOARD_HCLK_N)
/* USB. FOUT is the source. The USB CLK must be 48MHz */
#define BOARD_USB_N 1
#define BOARD_USB_FREQUENCY (BOARD_PLL_FOUT / BOARD_USB_N)
/* LED definitions ******************************************************************/
/* The NuTiny has a single green LED that can be controlled from sofware. This LED
* is connected to PIN17. It is pulled high so a low value will illuminate the LED.
*/
#define BOARD_NLEDS 1
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
* NuTiny. The following definitions describe how NuttX controls the LEDs:
*
* SYMBOL Meaning LED state
* Initially all LED is OFF
* ------------------- ----------------------- ------------- ------------
* LED_STARTED NuttX has been started LED ON
* LED_HEAPALLOCATE Heap has been allocated LED ON
* LED_IRQSENABLED Interrupts enabled LED ON
* LED_STACKCREATED Idle stack created LED ON
* LED_INIRQ In an interrupt LED should glow
* LED_SIGNAL In a signal handler LED might glow
* LED_ASSERTION An assertion failed LED ON while handling the assertion
* LED_PANIC The system has crashed LED Blinking at 2Hz
* LED_IDLE K25Z is is sleep mode (Optional, not used)
*/
#define LED_STARTED 0
#define LED_HEAPALLOCATE 0
#define LED_IRQSENABLED 0
#define LED_STACKCREATED 0
#define LED_INIRQ 0
#define LED_SIGNAL 0
#define LED_ASSERTION 0
#define LED_PANIC 0
/* Button definitions ***************************************************************/
/* The NuTiny has no buttons */
#define NUM_BUTTONS 0
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: kl_boardinitialize
*
* Description:
* All K25Z architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void kl_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_FREEDOM_KL25Z_INCLUDE_BOARD_H */

122
configs/freedom-kl25z/nsh/Make.defs Normal file
View file

@ -0,0 +1,122 @@
############################################################################
# configs/freedom-kl25z/nsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv6-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
ifeq ($(CONFIG_HOST_WINDOWS),y)
HOSTEXEEXT = .exe
else
HOSTEXEEXT =
endif
ifeq ($(WINTOOL),y)
# Windows-native host tools
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
else
# Linux/Cygwin-native host tools
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
endif

651
configs/freedom-kl25z/nsh/defconfig Normal file
View file

@ -0,0 +1,651 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
# CONFIG_WINDOWS_NATIVE is not set
# CONFIG_WINDOWS_CYGWIN is not set
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
CONFIG_DEBUG=y
CONFIG_DEBUG_SCHED=y
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
CONFIG_ARCH_CHIP_KL=y
# CONFIG_ARCH_CHIP_SAM3U is not set
# CONFIG_ARCH_CHIP_STM32 is not set
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM0=y
CONFIG_ARCH_FAMILY="armv6-m"
CONFIG_ARCH_CHIP="kl"
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_HAVE_MPU is not set
CONFIG_BOARD_LOOPSPERMSEC=2988
# CONFIG_ARCH_CALIBRATION is not set
#
# ARMV6M Configuration Options
#
# CONFIG_ARMV6M_TOOLCHAIN_ATOLLIC is not set
# CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODEREDW is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW is not set
# CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM is not set
CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI=y
#
# KL25Z128/120 Configuration Options
#
# CONFIG_ARCH_CHIP_KL25Z128LC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128LE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128RE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD2AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128LC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD3AN is not set
CONFIG_ARCH_CHIP_MKL25Z128=y
# CONFIG_ARCH_CHIP_KL25Z128RD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128RE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD2AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VE3AN is not set
CONFIG_ARCH_FAMILY_L20=y
#
# KL25Z Peripheral Support
#
# CONFIG_KL_PDMA is not set
# CONFIG_KL_FMC is not set
# CONFIG_KL_EBI is not set
# CONFIG_KL_WDT is not set
# CONFIG_KL_RTC is not set
# CONFIG_KL_TMR0 is not set
# CONFIG_KL_TMR1 is not set
# CONFIG_KL_TIMR2 is not set
# CONFIG_KL_TIMR3 is not set
# CONFIG_KL_I2C0 is not set
# CONFIG_KL_I2C1 is not set
# CONFIG_KL_SPI0 is not set
# CONFIG_KL_SPI1 is not set
# CONFIG_KL_SPI2 is not set
# CONFIG_KL_SPI3 is not set
# CONFIG_KL_PWM0 is not set
# CONFIG_KL_PWM1 is not set
# CONFIG_KL_PWM2 is not set
# CONFIG_KL_PWM3 is not set
# CONFIG_KL_PWM4 is not set
# CONFIG_KL_PWM5 is not set
# CONFIG_KL_PWM6 is not set
# CONFIG_KL_PWM7 is not set
CONFIG_KL_UART0=y
# CONFIG_KL_UART1 is not set
# CONFIG_KL_USBD is not set
# CONFIG_KL_ACMP is not set
# CONFIG_KL_ADC is not set
# CONFIG_KL_PS2 is not set
# CONFIG_KL_I2S is not set
CONFIG_KL_INTHI=y
CONFIG_KL_SYSTICK_CORECLK=y
# CONFIG_KL_SYSTICK_XTALHI is not set
# CONFIG_KL_SYSTICK_XTALLO is not set
# CONFIG_KL_SYSTICK_XTALHId2 is not set
# CONFIG_KL_SYSTICK_HCLKd2 is not set
# CONFIG_KL_SYSTICK_INTHId2 is not set
# CONFIG_KL_UARTCLK_XTALHI is not set
# CONFIG_KL_UARTCLK_PLL is not set
CONFIG_KL_UARTCLK_INTHI=y
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
#
# Board Settings
#
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x1FFFF000
CONFIG_DRAM_SIZE=16384
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_FREEDOM_KL25Z=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="freedom-kl25z"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
CONFIG_SCHED_HAVE_PARENT=y
CONFIG_SCHED_CHILD_STATUS=y
CONFIG_PREALLOC_CHILDSTATUS=0
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=2
CONFIG_START_DAY=26
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
# CONFIG_SCHED_WORKQUEUE is not set
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
CONFIG_DISABLE_ENVIRON=y
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=8
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=1536
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=1536
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
CONFIG_DEV_LOWCONSOLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_UART0=y
CONFIG_MCU_SERIAL=y
CONFIG_UART0_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# UART0 Configuration
#
CONFIG_UART0_RXBUFSIZE=256
CONFIG_UART0_TXBUFSIZE=256
CONFIG_UART0_BAUD=115200
CONFIG_UART0_BITS=8
CONFIG_UART0_PARITY=0
CONFIG_UART0_2STOP=0
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
CONFIG_DISABLE_MOUNTPOINT=y
# CONFIG_FS_RAMMAP is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
CONFIG_MM_SMALL=y
CONFIG_MM_REGIONS=1
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
# CONFIG_BUILTIN is not set
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=0
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Helper Functions
#
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
CONFIG_NSH_DISABLE_CD=y
CONFIG_NSH_DISABLE_CP=y
CONFIG_NSH_DISABLE_DD=y
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
CONFIG_NSH_DISABLE_GET=y
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
CONFIG_NSH_DISABLE_IFCONFIG=y
# CONFIG_NSH_DISABLE_KILL is not set
CONFIG_NSH_DISABLE_LOSETUP=y
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
CONFIG_NSH_DISABLE_MKDIR=y
CONFIG_NSH_DISABLE_MKFATFS=y
# CONFIG_NSH_DISABLE_MKFIFO is not set
CONFIG_NSH_DISABLE_MKRD=y
# CONFIG_NSH_DISABLE_MH is not set
CONFIG_NSH_DISABLE_MOUNT=y
# CONFIG_NSH_DISABLE_MW is not set
CONFIG_NSH_DISABLE_NSFMOUNT=y
# CONFIG_NSH_DISABLE_PS is not set
CONFIG_NSH_DISABLE_PING=y
CONFIG_NSH_DISABLE_PUT=y
# CONFIG_NSH_DISABLE_PWD is not set
CONFIG_NSH_DISABLE_RM=y
CONFIG_NSH_DISABLE_RMDIR=y
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
CONFIG_NSH_DISABLE_UMOUNT=y
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
CONFIG_NSH_DISABLE_WGET=y
# CONFIG_NSH_DISABLE_XD is not set
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=64
CONFIG_NSH_LINELEN=80
CONFIG_NSH_NESTDEPTH=3
CONFIG_NSH_DISABLESCRIPT=y
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
# CONFIG_NSH_ARCHINIT is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# USB Monitor
#
# Application configuration
# Application configuration
# Application configuration
# Application configuration
# Application configuration
CONFIG_APPS_DIR="../apps"

75
configs/freedom-kl25z/nsh/setenv.sh Normal file
View file

@ -0,0 +1,75 @@
#!/bin/bash
# configs/freedom-kl25z/nsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

122
configs/freedom-kl25z/ostest/Make.defs Normal file
View file

@ -0,0 +1,122 @@
############################################################################
# configs/freedom-kl25z/ostest/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv6-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
ifeq ($(CONFIG_HOST_WINDOWS),y)
HOSTEXEEXT = .exe
else
HOSTEXEEXT =
endif
ifeq ($(WINTOOL),y)
# Windows-native host tools
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
else
# Linux/Cygwin-native host tools
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
endif

579
configs/freedom-kl25z/ostest/defconfig Normal file
View file

@ -0,0 +1,579 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
CONFIG_DEBUG=y
CONFIG_DEBUG_SCHED=y
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
CONFIG_ARCH_CHIP_KL=y
# CONFIG_ARCH_CHIP_SAM3U is not set
# CONFIG_ARCH_CHIP_STM32 is not set
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM0=y
CONFIG_ARCH_FAMILY="armv6-m"
CONFIG_ARCH_CHIP="kl"
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_HAVE_MPU is not set
CONFIG_BOARD_LOOPSPERMSEC=2988
# CONFIG_ARCH_CALIBRATION is not set
#
# ARMV6M Configuration Options
#
# CONFIG_ARMV6M_TOOLCHAIN_ATOLLIC is not set
# CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODEREDW is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW is not set
# CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM is not set
CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI=y
#
# KL25Z128/120 Configuration Options
#
# CONFIG_ARCH_CHIP_KL25Z128LC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128LE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128RE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD2AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128LC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RC1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD1BN is not set
# CONFIG_ARCH_CHIP_KL25Z128RD2BN is not set
# CONFIG_ARCH_CHIP_KL25Z128LD3AN is not set
CONFIG_ARCH_CHIP_MKL25Z128=y
# CONFIG_ARCH_CHIP_KL25Z128RD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128RE3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD2AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VD3AN is not set
# CONFIG_ARCH_CHIP_KL25Z128VE3AN is not set
CONFIG_ARCH_FAMILY_L20=y
#
# KL25Z Peripheral Support
#
# CONFIG_KL_PDMA is not set
# CONFIG_KL_FMC is not set
# CONFIG_KL_EBI is not set
# CONFIG_KL_WDT is not set
# CONFIG_KL_RTC is not set
# CONFIG_KL_TMR0 is not set
# CONFIG_KL_TMR1 is not set
# CONFIG_KL_TIMR2 is not set
# CONFIG_KL_TIMR3 is not set
# CONFIG_KL_I2C0 is not set
# CONFIG_KL_I2C1 is not set
# CONFIG_KL_SPI0 is not set
# CONFIG_KL_SPI1 is not set
# CONFIG_KL_SPI2 is not set
# CONFIG_KL_SPI3 is not set
# CONFIG_KL_PWM0 is not set
# CONFIG_KL_PWM1 is not set
# CONFIG_KL_PWM2 is not set
# CONFIG_KL_PWM3 is not set
# CONFIG_KL_PWM4 is not set
# CONFIG_KL_PWM5 is not set
# CONFIG_KL_PWM6 is not set
# CONFIG_KL_PWM7 is not set
CONFIG_KL_UART0=y
# CONFIG_KL_UART1 is not set
# CONFIG_KL_USBD is not set
# CONFIG_KL_ACMP is not set
# CONFIG_KL_ADC is not set
# CONFIG_KL_PS2 is not set
# CONFIG_KL_I2S is not set
CONFIG_KL_INTHI=y
CONFIG_KL_SYSTICK_CORECLK=y
# CONFIG_KL_SYSTICK_XTALHI is not set
# CONFIG_KL_SYSTICK_XTALLO is not set
# CONFIG_KL_SYSTICK_XTALHId2 is not set
# CONFIG_KL_SYSTICK_HCLKd2 is not set
# CONFIG_KL_SYSTICK_INTHId2 is not set
# CONFIG_KL_UARTCLK_XTALHI is not set
# CONFIG_KL_UARTCLK_PLL is not set
CONFIG_KL_UARTCLK_INTHI=y
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
#
# Board Settings
#
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x1FFFF000
CONFIG_DRAM_SIZE=16384
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_FREEDOM_KL25Z=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="freedom-kl25z"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
#
# Board-Specific Options
#
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
CONFIG_SCHED_HAVE_PARENT=y
CONFIG_SCHED_CHILD_STATUS=y
CONFIG_PREALLOC_CHILDSTATUS=0
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=2
CONFIG_START_DAY=22
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
# CONFIG_SCHED_WORKQUEUE is not set
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="ostest_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
CONFIG_DISABLE_ENVIRON=y
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=8
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=1536
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=1536
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
CONFIG_DEV_LOWCONSOLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_UART0=y
CONFIG_MCU_SERIAL=y
CONFIG_UART0_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# UART0 Configuration
#
CONFIG_UART0_RXBUFSIZE=256
CONFIG_UART0_TXBUFSIZE=256
CONFIG_UART0_BAUD=115200
CONFIG_UART0_BITS=8
CONFIG_UART0_PARITY=0
CONFIG_UART0_2STOP=0
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
CONFIG_DISABLE_MOUNTPOINT=y
# CONFIG_FS_RAMMAP is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
CONFIG_MM_SMALL=y
CONFIG_MM_REGIONS=1
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
# CONFIG_BUILTIN is not set
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=0
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Helper Functions
#
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
CONFIG_EXAMPLES_OSTEST=y
# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
CONFIG_EXAMPLES_OSTEST_LOOPS=1
CONFIG_EXAMPLES_OSTEST_STACKSIZE=1536
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
CONFIG_EXAMPLES_OSTEST_RR_RUNS=1
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModbus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
# CONFIG_NSH_LIBRARY is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# readline()
#
# CONFIG_SYSTEM_READLINE is not set
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# USB Monitor
#

75
configs/freedom-kl25z/ostest/setenv.sh Normal file
View file

@ -0,0 +1,75 @@
#!/bin/bash
# configs/freedom-kl25z/ostest/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

134
configs/freedom-kl25z/scripts/ld.script Normal file
View file

@ -0,0 +1,134 @@
/****************************************************************************
* configs/kwikstik-k40/scripts/ld.script
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The MKL25Z128 has 128Kb of FLASH beginning at address 0x00000000 and
* 16Kb of SRAM at address 0x1ffff000.
*/
MEMORY
{
vectflash (rx) : ORIGIN = 0x00000000, LENGTH = 0x00c0
cfmprotect (rx) : ORIGIN = 0x00000400, LENGTH = 0x10
progflash (rx) : ORIGIN = 0x00000410, LENGTH = 128K - 0x410
datasram (rwx) : ORIGIN = 0x1ffff000, LENGTH = 16K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
EXTERN(_cfmconfig)
ENTRY(_stext)
SECTIONS
{
.vectors : {
_svectors = ABSOLUTE(.);
*(.vectors)
_evectors = ABSOLUTE(.);
} > vectflash
.cfmprotect : {
*(.cfmconfig)
} > cfmprotect
.text : {
_stext = ABSOLUTE(.);
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > progflash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > progflash
.ARM.extab : {
*(.ARM.extab*)
} > progflash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > progflash
__exidx_end = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > datasram AT > progflash
_eronly = LOADADDR(.data);
.ramfunc ALIGN(4): {
_sramfuncs = ABSOLUTE(.);
*(.ramfunc .ramfunc.*)
_eramfuncs = ABSOLUTE(.);
} > datasram AT > progflash
_framfuncs = LOADADDR(.ramfunc);
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > datasram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

115
configs/freedom-kl25z/scripts/ld.script_old Normal file
View file

@ -0,0 +1,115 @@
/****************************************************************************
* configs/freedom-kl25z/scripts/ld.script
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The MKL25Z128 has 128Kb of FLASH beginning at address 0x0000:0000 and
* 16Kb of SRAM at address 0x20000000.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x00000000, LENGTH = 128K
sram (rwx) : ORIGIN = 0x1FFFF000, LENGTH = 16K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

116
configs/freedom-kl25z/src/Makefile Normal file
View file

@ -0,0 +1,116 @@
############################################################################
# configs/freedom-kl25z/src/Makefile
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = kl_boardinitialize.c
ifeq ($(CONFIG_HAVE_CXX),y)
CSRCS += kl_cxxinitialize.c
endif
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += kl_led.c
endif
ifeq ($(CONFIG_NUC1XX_USBD),y)
CSRCS += kl_usbd.c
endif
ifeq ($(CONFIG_PWM),y)
CSRCS += kl_pwm.c
endif
ifeq ($(CONFIG_QENCODER),y)
CSRCS += kl_qencoder.c
endif
ifeq ($(CONFIG_WATCHDOG),y)
CSRCS += kl_watchdog.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += kl_nsh.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
CFLAGS += -I$(ARCH_SRCDIR)\chip -I$(ARCH_SRCDIR)\common -I$(ARCH_SRCDIR)\armv7-m
else
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
endif
endif
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
$(call ARCHIVE, $@, $(OBJS))
.depend: Makefile $(SRCS)
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
$(Q) touch $@
depend: .depend
clean:
$(call DELFILE, libboard$(LIBEXT))
$(call CLEAN)
distclean: clean
$(call DELFILE, Make.dep)
$(call DELFILE, .depend)
-include Make.dep

131
configs/freedom-kl25z/src/freedom-kl25z.h Normal file
View file

@ -0,0 +1,131 @@
/****************************************************************************************************
* configs/freedom-kl25z/src/freedom-kl25z.h
* arch/arm/src/board/freedom-kl25z.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __CONFIGS_NUTINY_NUC120_SRC_NUTINY_NUC120_H
#define __CONFIGS_NUTINY_NUC120_SRC_NUTINY_NUC120_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* Configuration ************************************************************************************/
/* NuTiny-EVB-120 GPIOs *****************************************************************************/
/* The NuTiny has a single green LED that can be controlled from sofware. This LED
* is connected to PIN17 (PB.0). It is pulled high so a low value will illuminate the LED.
*
* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
* NuTiny. The following definitions describe how NuttX controls the LEDs:
*
* SYMBOL Meaning LED state
* Initially all LED is OFF
* ------------------- ----------------------- ------------- ------------
* LED_STARTED NuttX has been started LED ON
* LED_HEAPALLOCATE Heap has been allocated LED ON
* LED_IRQSENABLED Interrupts enabled LED ON
* LED_STACKCREATED Idle stack created LED ON
* LED_INIRQ In an interrupt LED should glow
* LED_SIGNAL In a signal handler LED might glow
* LED_ASSERTION An assertion failed LED ON while handling the assertion
* LED_PANIC The system has crashed LED Blinking at 2Hz
* LED_IDLE NUC1XX is in sleep mode (Optional, not used)
*/
#define GPIO_LED (GPIO_OUTPUT | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN0)
/* Button definitions ***************************************************************/
/* The NuTiny has no buttons */
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: kl_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the NuTiny-EVB-120 board.
*
****************************************************************************************************/
void weak_function kl_spiinitialize(void);
/****************************************************************************************************
* Name: kl_usbinitialize
*
* Description:
* Called from kl_usbinitialize very early in inialization to setup USB-related
* GPIO pins for the NuTiny-EVB-120 board.
*
****************************************************************************************************/
#ifdef CONFIG_STM32_USB
void weak_function kl_usbinitialize(void);
#endif
/****************************************************************************************************
* Name: kl_ledinit
*
* Description:
* Initialize the on-board LED
*
****************************************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void kl_ledinit(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_NUTINY_NUC120_SRC_NUTINY_NUC120_H */

102
configs/freedom-kl25z/src/kl_boardinitialize.c Normal file
View file

@ -0,0 +1,102 @@
/************************************************************************************
* configs/freedom-kl25z/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "freedom-kl25z.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: kl_boardinitialize
*
* Description:
* All K25Z architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void kl_boardinitialize(void)
{
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* kl_spiinitialize() has been brought into the link.
*/
#if defined(CONFIG_NUC1XX_SPI1) || defined(CONFIG_NUC1XX_SPI2) || defined(CONFIG_NUC1XX_SPI3)
if (kl_spiinitialize)
{
kl_spiinitialize();
}
#endif
/* Initialize USB if the 1) USB device controller is in the configuration and 2)
* disabled, and 3) the weak function kl_usbinitialize() has been brought
* into the build. Presumeably either CONFIG_USBDEV is also selected.
*/
#ifdef CONFIG_NUC1XX_USB
if (kl_usbinitialize)
{
kl_usbinitialize();
}
#endif
/* Configure on-board LED if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
kl_ledinit();
#endif
}

154
configs/freedom-kl25z/src/kl_led.c Normal file
View file

@ -0,0 +1,154 @@
/****************************************************************************
* configs/freedom-kl25z/src/up_autoleds.c
* arch/arm/src/board/up_autoleds.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The NuTiny has a single green LED that can be controlled from sofware.
* This LED is connected to PIN17. It is pulled high so a low value will
* illuminate the LED.
*
* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
* NuTiny. The following definitions describe how NuttX controls the LEDs:
*
* SYMBOL Meaning LED state
* Initially all LED is OFF
* ------------------- ----------------------- ------------- ------------
* LED_STARTED NuttX has been started LED ON
* LED_HEAPALLOCATE Heap has been allocated LED ON
* LED_IRQSENABLED Interrupts enabled LED ON
* LED_STACKCREATED Idle stack created LED ON
* LED_INIRQ In an interrupt LED should glow
* LED_SIGNAL In a signal handler LED might glow
* LED_ASSERTION An assertion failed LED ON while handling the assertion
* LED_PANIC The system has crashed LED Blinking at 2Hz
* LED_IDLE NUC1XX is is sleep mode (Optional, not used)
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "kl_gpio.h"
#include "freedom-kl25z.h"
//extern void blueled(int on);
//int i=0;
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define ledvdbg lldbg
# else
# define ledvdbg(x...)
# endif
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/* Dump GPIO registers */
#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_LEDS)
# define led_dumpgpio(m) kl_dumpgpio(GPIO_LED, m)
#else
# define led_dumpgpio(m)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: kl_ledinit
*
* Description:
* Initialize the on-board LED
*
****************************************************************************/
void kl_ledinit(void)
{
led_dumpgpio("Before configuration");
//kl_configgpio(GPIO_LED);
/* Blink blue LED to indicate we are here */
//for (; ; i++)
// blueled(i & 0x10000);
led_dumpgpio("After configuration");
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
kl_gpiowrite(GPIO_LED, false);
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
kl_gpiowrite(GPIO_LED, true);
}
#endif /* CONFIG_ARCH_LEDS */