luchianmihai/walnux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Update ChangeLog in preparation for 7.30 release.

Browse source
This commit is contained in:
Gregory Nutt 2019-05-18 09:01:32 -06:00
parent 8603a13f38
commit 84bde02def
1 changed files with 498 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

499
ChangeLog
View file

@ -23764,4 +23764,501 @@
break compilation in certain configurations. From Mateusz Szafoni
(2019-03-24).
7.30 2019-xx-xx Gregory Nutt <gnutt@nuttx.org>
7.30 2019-05-19 Gregory Nutt <gnutt@nuttx.org>
* arch/ and config/ files: All board interfaces (those starting with
board_) must be defined in board-specific logic. Otherwise, they cannot
be customized for specialized usage by different boards. The
board_reset() interface was defined in architecture-specific logic that
only called up_systemreset(). That is useless! This change removes the
board_reset() implementation from the architecture-specific code and
re-implements it in the src/ directory of each board that has
CONFIG_BOARDCTL_RESET enabled. That is the correct functional
partitioning. From Gregory Nutt (2019-03-25).
* configs/omnibusf4/src/stm32_reset: Add boardctl() reset logic. From
Bill Gatliff (2019-03-25).
* arch/arm/src/stm32f7/stm32_qspi.c: Fix QuadSPI interrupts. This commit
essentially replaces wrongly named configuration variables
STM32F7_QSPI_INTERRUPTS into CONFIG_STM32F7_QSPI_INTERRUPTS. Also fixes
some getreg/putreg where register addresses were used instead of
register offsets From Pierre-Olivier Vauboin (2019-03-25).
* graphics/nxmu, include/nuttx/nx/nxmu.h, libs/libnx: Add new
server->client callback to notify the window client of server events.
Remove the old 'blocked' callback and just make it one case of an 'event'
callback. From Gregory Nutt (2019-03-25).
* graphics/ and libs/libnx: Implement new interfaces nx_synch() and
nxtk_synch(). This are used to synchronize the NX server with the window
client. Currently most of the logic is equivalent to nx_block() and
nxtk_block(), but with slightly different semantics. The are separate
now because they are likely to diverge in the future. From Gregory Nutt
(2019-03-25).
* configs/stm32f103-minimum/src/: USB reset was not working appropriately
since the pin connected to D+ was incorrectly defined and the pullup/down
logic was reversed. From Matias N (2019-03-25).
* configs/omnibusf4: Add board_ioctl() which is needed only if
CONFIG_BOARDCTL_IOCTL=y is selected; Update NSH configuration to enable
board IOCTLs and DFU mode reset. From Bill Gatliff (2019-03-26).
* include/limits.h: Remove the duplicate TMP_MAX definitions. The
standard requires that TMP_MAX defines be in stdio.h. From Xiang Xiao
(2019-03-26).
* include/sys/select.h: Fix compiler error when CONFIG_NSOCKET_DESCRIPTORS
is undefined. From Xiang Xiao (2019-03-26).
* arch/arm/src/armv7-a/Toolchain.defs: Fix 'cc1: warning: switch
-mcpu=cortex-a7 conflicts with -march=armv7-a switch' From Xiang Xiao
(2019-03-26).
* drivers/usbdev/cdcacm.c: This fixes a problem where the host sent a "get
descriptor" message of type "standard" with a recipient of type
"interface". Since the composite driver would only pass messages to the
child interfaces when a message was not "standard", this message was not
handled. I changed the condition so that the composite driver checks not
only if this is a "standard" message but if it is also directed to the
device. Otherwise, the handling is delegated to the children of the
composite device. From Matias N (2019-03-26).
* drivers/video/max7456.c: Adds a read-only (for now) /dev/osd0/CM
interface for obtaining the chip's onboard NVM character map data. Use
seek() to position the cursor over a desired subset of bytes, or request
a large read to obtain the entire EEPROM memory contents. Values are
returned in binary form. Use hexdump, etc. to format them for viewing.
From Bill Gatliff (2019-03-26).
* configs/nucleo-l476rg/src/stm32_gpio.c,
configs/stm32f103-minimum/src/stm32_gpio.c, and
drivers/sensors/zerocross.c: Fix some errors when debug assertions are
enabled. From Matous Pokorny (2019-03-29).
* configs/boardctl.c, include/sys/boardctl.h: Add a command to start the
VNC server. From Gregory Nutt (2019-04-02).
* drivers/syslog/syslog_stream.c: In syslog buffered mode, avoid IOB alloc
lock-up with heavy network activity. This change alters the buffered
syslog logic to use 'iob_tryalloc' instead of blocking 'iob_alloc' to
avoid syslog printing from getting stuck when all IOBs are depleted by
network activity. An issue was seen when large incoming TCP transfer
uses free IOB buffers and processing threads try to use syslog which then
block at iob_alloc. From Jussi Kivilinna (2019-04-03).
* arch/stm32f7: Support bypassing the input clock divider on the SDMMC
interface. This enables using the full clock speed provided to the SDMMC
interface with no dividing. From Anthony Merlino (2019-04-03).
* arch/arc/stm32f7: Add support for using the HSE in bypass mode,
configured by board.h From Anthony Merlino (2019-04-03).
* arch/arm/stm32f7: Fixes some macros related to OTGFS/OTGHS preventing
OTGHS from working. From Anthony Merlino (2019-04-03).
* arch/arm/src/nrf52/nrf52832_errdata.c: Fix compiler error when following
C89. From Erik Englund (2019-04-03).
* The commit corrects the gpioirq when mismatch mode is selected and adds
support for edge detect mode. Slew Rate was also added for
completeness. From Abdelatif Guettouche (2019-04-03).
* libs/libc/stdio/lib_libvsprintf.c: Restore support for printing NULL
string as "(null)". Legacy printf supported printing "(null)" in place
for NULL string: printf("null: %s\n", NULL); => null: (null). This
commit restores this functionality for new printf library. From Jussi
Kivilinna (2019-04-04).
* fs/littlefs/lfs.c: Fix lfs_format bug. In superblock disk root-block
assignment, the second must be root[1]. From YanLin Zhu (2019-04-04).
* sched/pthread: Added non-standard pthread_get_stackaddr_np() and
pthread_get_stacksize_np(). From Joao Matos (2019-04-04).
* include/pthread.h and libs/libcpthread: Fixed
pthread_attr_get/setstacksize param type to size_t. From Joao Matos
(2019-04-04).
* Fixed R_OK/X_OK definitions to match POSIX. From Joao Matos (2019-04-04).
* libs/libc/locale/lib_setlocale.c: Improved error handling in
setlocale(). From Joao Matos (2019-04-04).
* libs/libc/misc/lib_utsname.c: Fixed return code in uname(). From Joao
Matos (2019-04-04).
* include/sys/syscall.h and syscall/: Added support for munmap() syscall.
From Joao Matos (2019-04-04).
* include/alloca.h: Add alloca.h. Included limited implementation of
alloc() that is only available for GCC versions 3 and above. From Joao
Matos (2019-04-04).
* configs/nucleo-144/include/board.h: Added STM32_RCC_DCKCFGR2_DSISRC
definition. From Joao Matos (2019-04-04).
* include/signal.h: Add commented out definition of the si_addr field.
From oao Matos (2019-04-04).
* arch/arm/src/stm32f7/stm32_fmc.h: Updated stm32_fmc.h with more FMC
definitions. From oao Matos (2019-04-04).
* Added support for KSZ8081RNA PHY to LPC17xx Ethernet driver. From
jjlange (2019-04-04).
* Refresh configurations. Remove CONFIG_NXWM_UNITTEST=y, not longer in
Kconfigs. From Gregory Nutt (2019-04-04).
* syscall/syscall.csv: Fix a warning due to inconsistencies in return
type. From Gregory Nutt (2019-04-04).
* syscall/syscall.csv: Correct an error in creating the munmap() proxy if
CONFIG_FS_RAMMAP is not defined. From Gregory Nutt (2019-04-04).
* graphics/, lib/libnx, include/nutt/nx: Add support for modal windows.
From Gregory Nutt (2019-04-05).
* drivers/contactless/mfrc522.c: Fixes for MFRC522. In mfrc522_read
uid.sak must be different from 0x04 not as before from 0x00. SAK == 0x00
is a valid PICC type. Add interface to read MIFARE Ultralight data From
Mateusz Szafoni (2019-04-05).
* configs/nucleo-l073rz: add mfrc522 support From Mateusz Szafoni
(2019-04-05).
* graphics/nxbe: Implement hooks that will eventually support software
'sprites', i.e., things like OSD functionality, a software cursor,
selection rectangles, window resize preview, etc. From Gregory Nutt
(2019-04-05).
* Added support for Ethernet PHY ioctl() on LPC17xx. From jjlange
(2019-04-05).
* include/nuttx/nx/nxcursor.h: Add a header file describing the
implementation of an NX cursor interface. From Gregory Nutt (2019-04-06).
* libs/libnx/nxmu: Add front-end, client, message handling needed for
cursor support. Still actual cursor logic yet, just message handling.
graphics/nxmu and graphics/nxbe: Add back-end message handling needed
for cursor support. No actual cursor logic yet, just message handling.
From Gregory Nutt (2019-04-06).
* graphics: Extend the definition of the cursor image structure. From
Gregory Nutt (2019-04-07).
* arch/arm/src/stm32f7: USB High speed for STM32F7 series From Ramtin
Amin (2019-04-07).
* I2C1 config on stm32f746g-disco. Typo in stm32f7/stm32_i2c.c From
Matthew Koch (2019-04-08).
* Kconfig warnings: defaults for choice values not supported From Matthew
Koch (2019-04-08).
* arch/arm/src/stm32f7: Ported the PWM from F4 to F7. From Eduard Niesner
(2019-04-08).
* graphics/nxbe: Correct some experimental cursor drawing algorithms.
From Gregory Nutt (2019-04-08).
* grahics/nxglib/nxglib.h: Move internal function prototypes from
include/nuttx/nx/nxglib.h to graphics/nxglib/nxglib.h. From Gregory Nutt
(2019-04-08).
* Support for STM32L071X and a few improvements for STM32F0L0:
arch/arm/src/stm32f0l0: add peripherals configuration for STM32L0
arch/arm/src/stm32f0l0: a few fixes for USART
arch/arm/include/stm32f0l0/stm32f0_irq.h: use names as in other STM32
arch/arm/include/stm32f0l0/chip.h: use names as in other STM32
From Mateusz Szafoni (2019-04-09).
* Adds support for software cursors with differing pixel depths on multiple
displays. This bring the software cursor to code complete. Still
untested. From Gregory Nutt (2019-04-09).
* graphics/nxbe: Add some missing checks: Don't permit the software
cursor to be enabled until it has been assigned an image; don't perform
any cursor operations while the cursor is disabled. From Gregory Nutt
(2019-04-10).
* include/nuttx/usb/hid.h: The usbhid_descriptor_s struct defined in hid.h
included some optional fields that should not be hard-defined as part of
that structure. An arbitrary number of optional entries could be
included in the descriptor, but that is not properly represented. No
code on NuttX currently depends on the structure definition with an
optional descriptor so it is safe to remove. From Matias N (2019-03-30).
* arch/arm/src/stm32f7/stm32_otgdev.c: Correct hard-coded FIFO size that is
wrong for OTG FS. From Ramtin Amin (2019-04-11).
* /graphics/nxglib/cursor: Correct two locations where y was used but
where x was intended. From Gregory Nutt (2019-04-11).
* Documentation/NXGraphicsSubsystem.html: Update documentation to describe
blocking, synchronization, and cursor interfaces. From Gregory Nutt
(2019-04-11).
* arch/arm/src/stm32f: Added support for TICKLESS mode. From Valmantas
Paliksa (2019-04-12).
* arch/arm/src/stm32f7/stm32_spi.c: Add SPI DMA threshold configuration.
From Valmantas Paliksa (2019-04-12).
* arch/arm/src/stm32f7/stm32_ethernet.c: Auto-generate Ethernet MAC
address from device unique ID. From Valmantas Paliksa (2019-04-12).
* arch/arm/src/stm32f7/stm32_flash.c: Add flash block mapping support for
progmem. From Valmantas Paliksa (2019-04-12).
* arch/arm/src/stm32f7/stm32_uid.c: Add UID access. From Valmantas
Paliksa (2019-04-12).
* drivers/can/can.c: Support multiple readers of the same port From
Valmantas Paliksa (2019-04-12).
* drivers/can/mcp2515.c: mcp2515 driver optimizations. From Valmantas
Paliksa (2019-04-12).
* arch/arm/src/stm32f7/stm32_can.c: CAN fixes. From Valmantas Paliksa
(2019-04-12).
* graphics/nxbe: More work cursor coordinates. Still at least one big bug
in the logic. From Gregory Nutt (2019-04-13).
* arch/arm/src/stm32: As noted by Matias N, the FLASH base address used
was incorrect. It was using the address of the FLASH data, not the
address of the FLASH registers. From Gregory Nutt (2019-04-13).
* arch/arm/src/stm32/stm32f10xxf30xx_flash.c: RCC register access should
not be offset by FLASH register base. From Matias N (2019-04-13).
* graphics/nxbe: This seems to fix the last of software cursor bugs. On
the LPC54, it looks pretty clean. Not flickery as I feared. Probably
not so good on low end displays. Possible transient artifacts? Not
sure, maybe. Or maybe my eyes are playing tricks from staring at this
too long. From Gregory Nutt (2019-04-13).
* configs/stm32f103-minimum/src: Add PROCFS automount support From Alan
Carvalho de Assis (2019-04-14).
* net/utils: net_lock() and net_restorelock() now return a value. That
values is the standard zero on success; negated errno value on failure.
This return value is only needed for -ECANCELED. That cancellation
indication needs to ripple all the way back to the highest levels where
the cancellation can be acted on. This commit only adds the return
value; it does not add checking for the return values of net_lock() and
net_restorelock() at higher levels. That is required too. From Gregory
Nutt (2019-04-14).
* configs/stm32ldiscovery/src: Add support for board_late_initialize(),
Move common initialization logic out of board_app_initialize() into new
file stm32_bringup.c From Gregory Nutt (2019-04-15).
* drivers/leds/userled: Fix ledset validity check in ULEDIOC_SETALL
ioctl. From Jussi Kivilinna (2019-04-15).
* arch/arm/src/stm32/Kconfig: It seems one option in the timer
configuration was lost at some point. From Matias N (2019-04-15).
* stm32f7: I2C Interrupt storm fix From David Sidrane (2019-04-16).
* arch/arm/src/stm32l4/stm32l4_pwm.c Fix register addr, en_bit and resetbit
for pwm timers From Fabian Justi (2019-04-17).
* configs/nucleo-l476rg/src/nucleo-l476rg.h Fixed naming stm32l4_pwm_setup
configs/nucleo-l476rg/src/stm32_appinit.c Fixed naming stm32l4_pwm_setup
From Fabian Justi (2019-04-17).
* stm32f7: I2C track bad state. The previous commit was true draconian.
Now we track bad state and so the SW reset only when it occurs. From
David Sidrane (2019-04-17).
* arch/arm/src/stm32f7: stm32f76xx77xx_pinmap.h: Adds additional pin
alternate function for SPI2 From Anthony Merlino (2019-04-17).
* include/cxx/cstdlib: Add std::random() From Gregory Nutt (2019-04-21).
* arch/arm/src/cxd56xx and arch/arm/include/cxd56xx: Add initial CXD56xx
chip sources. From Nobuto Kobayashi (2019-04-22).
* configs/spresense: Add Spresense board support. From Nobuto Kobayashi
(2019-04-22).
* drivers/usbhost/usbhost_storage.c: Correct typo "const const" to "const".
arch/arm/src/stm32/stm32_i2s.c: In debug assertions, it on a sample rate
of 0, but based on other code comments this value implies disabling the
i2s master clock.
arch/arm/src/stm32/stm32_usbhost.h and arch/arm/src/stm32/Kconfig: Allow
vbus monitoring for the OTG_HS host driver.
From Jason Harris (2019-04-23).
* drivers/serial: The upper half serial driver configuration
CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was
replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will
permit supporting DMA on only one or both streams. From Gregory Nutt
(2019-04-24).
* configs/stm32f103-minimum/src/stm32_mcp2515.c: Patch up more breakage
found in build testing. Looks like fields were added and removed by
commit eb7373cedfa, but the implementation that uses the structure were
not updated. From Gregory Nutt (2019-04-24).
* arch/arm/src/stm32h7/stm32_start.c: Inclusion of nvic.h should not be
conditioned on CONFIG_ARCH_FPU. From Mateusz Szafoni (2019-04-25).
* arch/arm/src: Remove dependency on CONFIG_ARCH_FPU for inclusion of
nvic.h in all other *_start.c files. From Gregory Nutt (2019-04-25).
* nucleo-144: Regenerate f767-netnsh/defconfig. It appear that
CONFIG_NET_SOCKOPTS, is no more explicitly needed. From Phil Coval
(2019-04-25).
* configs/nucleo-h743zi/nsh/defconfig: Enable the FPU. From Jason Harris
(2019-04-25).
* Revert "sched/clock/clock_initialize.c: clock_inittime() needs to be
done with CONFIG_SCHED_TICKLESS and clock_initialize should skip
clock_inittime() for external RTC case since the RTC isn't ready yet."
This reverts commit 2bc709d4b99447f8decdc7580fdabab6dd8939b1. Commit
2bc709d4b99447f8decdc7580fdabab6dd8939b1 was intended to handle the case
where up_timer_gettime may not start from zero case. However, this
change has the side-effect of breaking every implementation of tickless
mode: After this change the tickless timer structures are used before
they are initialized in clock_inittime(). Initialization happens later
when up_initialize is called() when arm_timer_initialize().
Since the tickless mode timer is very special, one solution might be to:
(1) Rename xxx_timer_initialize to up_timer_initialize, (2) Move
up_timer_initialize to include/nuttx/arch.h, and (3) Call it from clock
subsystem instead up_initialize. Basically, this change make timer
initialization almost same as rtc initialization(up_rtc_initialize). For
now, however, we just need to revert the change. From Gregory Nutt
(2019-04-26).
* nucleo-144: Mount sysfs for ifconfig for f767-netnsh/defconfig. Even if
ifconfig is working to set IP, it will not work to display NICs (without
args) From Phil Coval (2019-04-26).
* nucleo-144: Update mbed URL and fix mistakes From Phil Coval (2019-04-26).
* stm32f7: Add basic PWM support to nucleo-144 board. More PWMs and multi
channels support may be investigated and added later. Tested on
nucleo-f767zi. From Phil Coval (2019-04-27).
* configs/nucleo-h743zi: Add support for I2C devices: ssd1306, pca9635,
i2ctools From Mateusz Szafoni (2019-04-28).
* Documentation/NuttxPortingGuide.html & drivers/syslog/README.txt: vsyslog
returns nothing. From Mateusz Szafoni (2019-04-28).
* configs/same70-xplained/twm4nx: Add a configuration for test Twm4Nx
using VNC. From Gregory Nutt (2019-04-28).
* configs/nucleo-l476rg/src: Make naming of functions consistent:
stm32l4_ no stm32_. Inconsistency noted by Phil Coval in Bitbucket PR
864. This commit takes a different approach to resolving the naming
inconsistency, however. From Gregory Nutt (2019-04-29).
* arch/arm/src/stm32l4: Add USB FS device support. From Juha Niskanen
(2019-04-29).
* configs: Update all configurations to account for the configuration
changes resulting from the separation of network initialization logic
from NSH. From Gregory Nutt (2019-04-29).
* configs/same70-xplained/twm4nx/defconfig: Updated to correctly
initialize network. I am getting a VNC display. It is incomplete and
crashes thereafter. But that is a start. From Gregory Nutt (2019-04-29).
* In many files: Remove references to CONFIG_DISABLE_SIGNALS. Signals can
no longer be disabled. From Gregory Nutt (2019-04-29).
* net/socket/getsockname.c: Fix addrlen check in socket debug features.
Getsockname checked erroneously a pointer agains 0, where the intention
was to dereference the pointer and to check the length. This causes also
a compilation failure if the code is compiled with CONFIG_DEBUG_FEATURES
and with -Werror flag set. From Jukka Laitinen (2019-04-30).
* drivers/net/phy_notify.c: Change sprintf to strncpy in phy_notify. On
some platforms, the sprintf doesn't accept a const char* as a format
argument. From Jukka Laitinen (2019-04-30).
* arch/arm/src/stm32h7: Add STM32H7 SDMMC driver. This is the initial
SDMMC driver for STM32H7. It is mostly copied from STM32F7, with
modified register addresses and bits, and IDMA added. This is still WIP;
it only works with IDMA. From Jukka Laitinen (2019-04-30).
* configs/nucleo-h743zi/include/board.h: Add default clock configuration
for SDMMC for nucleo-h743zi. From Jukka Laitinen (2019-04-30).
* arch/arm/src/stm32h7/chip/stm32h7x3xx_rcc.h: Fixes for STM32H7 RCC
definitions: (1) Fix compilation for UART7, UART8 and I2C4, (2) Add
backup domain control registers. From Jukka Laitinen (2019-04-30).
* arch/arm/src/stm32h7/stm32h7x3xx_rcc.c: Set the STM32H7 default HSI
pre-divider to 4. The I2C driver currently assumes HSI clock to be
16MHz. From Jukka Laitinen (2019-04-30).
* arch/arm/src/stm32h7/chip/stm32h7x3xx_memorymap.h: Add the STM32H7
SYSTEM_UID and DEBUGMCU_BASE register definitions. From Jukka Laitinen
(2019-04-30).
* arch/arm/src/stm32h7/chip/stm32h7x3xx_pinmap.h: Add the
GPIO_ETH_RMII_RXD1 pinmap definition for STM32H7. From Jukka Laitinen
(2019-04-30).
* arch/arm/src/stm32h7/stm32_i2c.c: Fix I2C4 compilation for STM32H7. From
Jukka Laitinen (2019-04-30).
* arch/arm/src/stm32h7/: Add stm32h7 Ethernet driver. This is the initial
push for the Ethernet driver. The driver has been tested to be working
on a nucleo board. This is still WIP, it doesn't for example do MAC
filtering on HW level, but just receives all ethernet packets. From
Jukka Laitinen (2019-04-30).
* arch/arm/src/stm32h7/: Add timer devices driver for STM32H7. This is
mostly a forklift from stm32f7 with some h7 specific modifications. From
Jukka Laitinen (2019-04-30).
* - Mostly arch/arm/src/imxrt and include/imxrt: This commit gets imx1020
family support started. It is pretty similar, but subtly different, to
1050/60 (less PLLs, less GPIO banks, differently numbered ports etc.
etc.). I think it's time to at least look at what needs to be done
before we can get these into the mainline kernel even though they're not
properly mature yet. Core memory functions, PLLs, serial and networking
are all working, but there's no stress-testing or similar been done...I'm
not aware of anything broken, but there again I haven't looked too hard.
I want to go through and start moving each of the imxrt family-specific
files into its own subdirectory to tidy things up a bit, and remove the
vast majority of ifdefs from the mainline code...but I think it's
appropriate to separate the cleanup steps from the new-chip-support
steps to keep things a bit more compartmentalized. Next week is a travel
week so it's possible I'll get time on the cleanup side of the house.
I can't be 100% certain I didn't inflict casualties on the imxrt1050/60
code in the process of doing this, but nsh for 1050 and netnsh and nsh
for the 1060 both compile correctly, so if I did break anything it's
going to be properly evil and difficult to find.
- include/nuttx/usb/hid.h: The usbhid_descriptor_s struct defined in
hid.h included some optional fields that should not be hard-defined as
part of that structure. An arbitrary number of optional entries could be
included in the descriptor, but that is not properly represented. No
code on NuttX currently depends on the structure definition with an
optional descriptor so it is safe to remove.
- Directory re-arrangement and splitting of each imxrt family variant
- Prevent intermittent SDCard timeouts by increasing timer in line with
spec.
- Support data dump on Hardfault
- Fix missing ccm definitions and wrong iomux offset
- Prevent hardfault when can't read from ENET PHY
- More consistent Ethernet pinmux From Dave Marples (2019-04-30).
* Documentation/NuttShell.html: Command date is misspelled as data in
chapter 2.12 Show or set the date and time (date). From Michał Łyszczek
(2019-05-01).
* configs/same70-xplained/twm4nx/defconfig: Increase packet MTU to 1500.
From Gregory Nutt (2019-05-03).
* Fix build for battery gauge From Tom Kopriva (2019-05-03).
* configs/same70-xplained/twm4nx/defconfig: Switch to 8BPP. That is the
negotiated size requested by the VNC client anyway.
graphics/vnc/server/vnc_color.c: Fix an error in color conversion. From
Gregory Nutt (2019-05-03).
* configs/lpcxpresso-lpc54628: Add a Twm4Nx configuration. From Gregory
Nutt (2019-05-04).
* arch/arm/src/common/up_initialize.c: up_initialize.c needs to know about
ramlog_consoleinit() From Jason Harris (2019-05-04).
* NX graphics: This commit adds support for hiding windows. This features
is needed by Twm4Nx: When a window is iconified, the icon should appear
on the background and the window should disappear (i.e., be hidden). The
windows needs to remain healthy and to be updated in all ways, but it
cannot affect the display content.
Conversely, when the icon is clicked, the icon needs to be hidden on
the backgound and the window needs to be restored in its current state
(which may be different than the state of the window at the time it
was iconified.
From Gregory Nutt (2019-05-05).
* arch/arm/src/stm32h7: Add missing parts for timer driver: Add the
missing header files, add the driver Kconfig, and add it to make
system. From Jukka Laitinen (2019-05-05).
* configs/nucleo-h743zi/include/board.h: Add the input clock frequency
definitions for all the drivers. Assumes internal clock source for all
the timers. From Jukka Laitinen (2019-05-05).
* arch/arm/src/stm32h7/Kconfig: fix warnings;
arch/arm/src/stm32h7/stm32_tim.c: don't use hardcoded UIF interrupt
From Mateusz Szafoni (2019-05-06).
* Add missing files of BMP180 example for nucleo-l476rg From Fabian Justi
(2019-05-06).
* drivers/sensors/apds9960.c: Initial state of allocated structure was not
being set. Noted by Leif Jacob. From Gregory Nutt (2019-05-06).
* graphics/nxbe/nxbe_setvisibility.c: Fix a missed redraw command in last
NX visibility changes. From Gregory Nutt (2019-05-06).
* graphics/: Windows can now be created in the hidden state. This can be
used to clean up initial window presentation which may involve several
steps. This makes those steps all invisible until nx[tk]_setvisibility()
is called to make the windows visible. From Gregory Nutt (2019-05-07).
* libs/libnx/nxtk/nxtk_events: Fix an error in handling mouse events for
framed windows. When drawing, NX may report mouse positions outside of
the Window. The is only for NX windows, but the outside-the-side
positions were being discarded by nxtk_events(). From Gregory Nutt
(2019-05-07).
* net/sixlowpan/sixlowpan_hc06.c: Correct an endian-ness problem in HC06
decompression. From Ivan Ucherdzhiev (2019-05-08).
* arm/src/lpc54xx/: Bring in the USB FS OHCI driver from LPC17. This is a
quick'n'dirty port that I will finish sometime later (I hope).
Currently, it is missing hardware clocking setup and is not even hooked
into the build system yet. Needless to say it does not yet even
compile. From Gregory Nutt (2019-05-08).
* Documentation/NXGraphicsSubsystem.html: Add documentation for new
nx[tk]_modal() and nx[tk]_setvisibility() interfaces. From Gregory Nutt
(2019-05-08).
* arch/arm/src/stm32f0l0: Initial ADC support and some improvemnets for
the STM32 M0 From Mateusz Szafoni (2019-05-09).
* configs/b-l072z-lrwan1: add ADC example From Mateusz Szafoni (2019-05-09).
* graphics/: Add new NX interfaces to query if a window is hidden or not.
From Gregory Nutt (2019-05-09).
* libs/libnx/nxtk/nxtk_opentoolbar.c: Refuse to open a toolbar of height
zero or less. From Gregory Nutt (2019-05-10).
* graphics/nxbe/nxbe_getrectangle.c: Fix an error in coordinate system
usage. Expected rectangle in device coordinate frame, but was passing
the rectangle in window-relative coordinate frame. From Gregory Nutt
(2019-05-10).
* nrf24l01: don't block in read if file descriptor is O_NONBLOCK. Add
support for "multicast" TX mode - no waiting for ACK (needs to be enabled
with fcntl SETTXPAYLOADNOACK) From Leif Jakob (2019-05-11).
* libs/libnx/nxmu/: Add a few bad input parameter checks.
configs/lpcxpresso-lpc54628/twm4nx/defconfig: Need to enable the NX
library. From Gregory Nutt (2019-05-12).
* libs/libnx/nxglib/nxglib_intersecting.c: Correct bogus logic in
nxgl_interesting. Good to know I was stupid then too and that is it not
just a recent thing. From Gregory Nutt (2019-05-13).
* arch/arm/src/stm32l4/stm32l4_usbdev.c: Add missing PWR USBV enable,
correct two USB register bits From Juha Niskanen (2019-05-14).
* arch/arm/src/stm32l4: Port HSI48 and CRS from STM32F0L0 From Juha
Niskanen (2019-05-14).
* arch/arm/src/stm32 and arch/arm/src/stm32f0l0: Port STM32F7 I2C to
STM32F3 and STM32F0L0 From Mateusz Szafoni (2019-05-15).
* configs/b-l072z-lrwan1: Add nxlines_oled example (ssd1306). Add support
for the I2C tool From Mateusz Szafoni (2019-05-15).
* configs/nucleo-f303ze: nxlines_oled example (ssd1306) From Mateusz
Szafoni (2019-05-15).
* graphics/: Fix an oversight in the implementation of per-window
framebuffers. It is true that redraw callbacks can be suppressed for all
cases ... EXCEPT ONE: When the window is resized to a larger size, then
the newly exposed territory must be drawn for the first time. From
Gregory Nutt (2019-05-16).
* graphics/nxterm and configs/boardctl.c: Replace specific interfaces
between boardctl and nxterm with a generalized IOCTL interface. From
Gregory Nutt (2019-05-16).
* graphics/nxterm: Add a new IOCTL that can be used to inform NxTerm that
the size of a window has changed. From Gregory Nutt (2019-05-16).
* configs/stm32f4discovery: Keep c++ global constructor symbols From
Masayuki Ishikawa (2019-05-17).
* arch/arm/src/stm32/Kconfig: simplify ARCH_HAVE_FPU selection and remove
redundant options for F207 From Mateusz Szafoni (2019-05-17).
* drivers/usbmisc: Add FUSB303 driver From Juha Niskanen (2019-05-17).
* sched/signal/sig_default.c: The abnormal termination handler was just
calling exit() conditionally when, for example, Ctrl-C is sent to a
task. The abnormal termination handler must obey the rules of
cancellation points: If cancelation is disabled, then the abnormal
termintion logic must wait for cancelation to be re-enabled; If
cancellation is deffered then the abnormal termination logic may have to
wait for the victim task to enter or exit a cancellation point. From
Gregory Nutt (2019-05-17).
* arch/arm/src/stm32f0l0: Add support for AES, RND, and HS148 for L0.
Move HSI48 enable from stm32_usbdev.c to stm32xx_rcc.c From Mateusz
Szafoni (2019-05-17).
8.1 2019-xx-xx Gregory Nutt <gnutt@nuttx.org>