Bring all eZ80 config files to same level
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1530 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
371881444e
commit
ea4e5d904f
13 changed files with 434 additions and 63 deletions
|
|
@ -4,7 +4,17 @@ README.txt
|
|||
ZDS-II Compiler Versions
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
4.11.0
|
||||
Different configurations have been build for this board using ZDS-11
|
||||
Versions 4.11.0 and 4.11.1. You have to check the files */Make.defs
|
||||
to see how the build is configured: Check the definitions of
|
||||
ZDSVERSION (if present) and ZDSINSTALLDIR.
|
||||
|
||||
NOTE: Different versions of the ZDS-II compiler may also require
|
||||
different versions of .linkcmd and .zdsproj files as well.
|
||||
|
||||
Version 4.11.0
|
||||
|
||||
Although it compiles without error, the 4.11.0 compiler generates
|
||||
This is the only version that this code has been built against.
|
||||
|
||||
Although it compiles without error, the 4.11.0 compiler generates
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
############################################################################
|
||||
# configs/ez80f910200kitg/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -37,7 +37,8 @@ include ${TOPDIR}/.config
|
|||
|
||||
# These are the directories where the ZDS-II toolchain is installed
|
||||
|
||||
ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.11.0
|
||||
ZDSVERSION := 4.11.1
|
||||
ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
|
||||
ZDSBINDIR := $(ZDSINSTALLDIR)/bin
|
||||
ZDSSTDINCDIR := $(ZDSINSTALLDIR)/include/std
|
||||
ZDSZILOGINCDIR := $(ZDSINSTALLDIR)/include/zilog
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
############################################################################
|
||||
# configs/ez80f910200kitg/ostest/defconfig
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -51,10 +51,18 @@
|
|||
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||
# the board that supports the particular chip or SoC.
|
||||
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||
# CONFIG_ARCH_NOINTC - define if the architecture does not
|
||||
# support an interrupt controller or otherwise cannot support
|
||||
# APIs like up_enable_irq() and up_disable_irq().
|
||||
# CONFIG_ARCH_IRQPRIO
|
||||
# Define if the architecture suports prioritizaton of interrupts
|
||||
# and the up_prioritize_irq() API.
|
||||
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||
# CONFIG_ENDIAN_BIG - Define for big endian (default is little endian)
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to z8 board architecture.
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
# CONFIG_ARCH_BUTTONS - Provide button APIs. Unique to board architecture.
|
||||
# CONFIG_ARCH_TIMERHOOK - Provide board-specific hooks into periodic timer logic.
|
||||
#
|
||||
CONFIG_ARCH=z80
|
||||
CONFIG_ARCH_Z80=y
|
||||
|
|
@ -65,12 +73,17 @@ CONFIG_ARCH_CHIP_EZ80F92=n
|
|||
CONFIG_ARCH_CHIP_EZ80F93=n
|
||||
CONFIG_ARCH_BOARD=ez80f910200kitg
|
||||
CONFIG_ARCH_BOARD_EZ80F910200KITG=y
|
||||
CONFIG_ARCH_NOINTC=n
|
||||
CONFIG_ARCH_IRQPRIO=n
|
||||
CONFIG_BOARD_LOOPSPERMSEC=1250
|
||||
CONFIG_ENDIAN_BIG=y
|
||||
CONFIG_DRAM_SIZE=65536
|
||||
CONFIG_ARCH_LEDS=n
|
||||
CONFIG_ARCH_BUTTONS=n
|
||||
CONFIG_ARCH_TIMERHOOK=n
|
||||
|
||||
#
|
||||
# eZ8 specific device driver settings
|
||||
# eZ80 specific device driver settings
|
||||
#
|
||||
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
# console and ttyS0 (default is the UART0).
|
||||
|
|
@ -95,6 +108,31 @@ CONFIG_UART1_PARITY=0
|
|||
CONFIG_UART0_2STOP=0
|
||||
CONFIG_UART1_2STOP=0
|
||||
|
||||
#
|
||||
# ez80 EMAC
|
||||
#
|
||||
# CONFIG_EZ80_EMAC - Enables support for ez80 EMAC driver.
|
||||
# CONFIG_EZ80_FIAD - Provides the MII address of the PHY device
|
||||
# CONFIG_EZ80_PKTBUFSIZE, CONFIG_EZ80_NTXPKTBUFS, and CONFIG_EZ80_NRXPKTBUFS -
|
||||
# The size of one packet buffer and the number of Rx and Tx packet
|
||||
# buffers. This must add up to exactly 8192 bytes.
|
||||
# CONFIG_EZ80_MDCDIV=1 - The value to use for the divider to derive
|
||||
# the MII MDC clock from SLCK. Options are 1->4; 2->6; 3->8; 4->10;
|
||||
# 5->14; 6->20; and 7->28
|
||||
# CONFIG_EZ80_TXPOLLTIMERMS - Specifies how often the EMAC controller
|
||||
# should poll for a Tx packet (milliseconds)
|
||||
# CONFIG_ARCH_MCFILTER - Enalbes multicast MAC address filtering (not
|
||||
# fully implemented
|
||||
CONFIG_EZ80_EMAC=n
|
||||
CONFIG_EZ80_FIAD=0x1f
|
||||
CONFIG_EZ80_PKTBUFSIZE=64
|
||||
CONFIG_EZ80_NTXPKTBUFS=64
|
||||
CONFIG_EZ80_NRXPKTBUFS=64
|
||||
CONFIG_EZ80_PKTBUFSIZE=64
|
||||
CONFIG_EZ80_MDCDIV=0
|
||||
CONFIG_EZ80_TXPOLLTIMERMS=10
|
||||
CONFIG_ARCH_MCFILTER=n
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
|
|
@ -103,6 +141,9 @@ CONFIG_UART1_2STOP=0
|
|||
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||
# different loaders using the GNU objcopy program. This option
|
||||
# should not be selected if you are not using the GNU toolchain.
|
||||
|
|
@ -110,6 +151,7 @@ CONFIG_UART1_2STOP=0
|
|||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=n
|
||||
CONFIG_MOTOROLA_SREC=n
|
||||
CONFIG_RAW_BINARY=n
|
||||
CONFIG_HAVE_LIBM=n
|
||||
|
||||
|
|
@ -160,13 +202,13 @@ CONFIG_ARCH_LOWPUTC=y
|
|||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2008
|
||||
CONFIG_START_YEAR=2009
|
||||
CONFIG_START_MONTH=2
|
||||
CONFIG_START_DAY=17
|
||||
CONFIG_START_DAY=25
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_HAVE_LOWUARTINIT=y
|
||||
CONFIG_DEV_CONSOLE=n
|
||||
CONFIG_DEV_LOWCONSOLE=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
|
|
@ -257,8 +299,8 @@ CONFIG_ARCH_KFREE=n
|
|||
CONFIG_MAX_TASKS=8
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=0
|
||||
CONFIG_NFILE_DESCRIPTORS=0
|
||||
CONFIG_NFILE_STREAMS=0
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=0
|
||||
CONFIG_NUNGET_CHARS=0
|
||||
|
|
@ -268,6 +310,33 @@ CONFIG_MAX_WDOGPARMS=2
|
|||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=0
|
||||
|
||||
#
|
||||
# Framebuffer driver options
|
||||
CONFIG_FB_CMAP=n
|
||||
CONFIG_FB_HWCURSOR=n
|
||||
CONFIG_FB_HWCURSORIMAGE=n
|
||||
#CONFIG_FB_HWCURSORSIZE
|
||||
#CONFIG_FB_TRANSPARENCY
|
||||
|
||||
#
|
||||
# Filesystem configuration
|
||||
#
|
||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||
CONFIG_FS_FAT=n
|
||||
CONFIG_FS_ROMFS=n
|
||||
|
||||
#
|
||||
# SPI-based MMC/SD driver
|
||||
#
|
||||
# CONFIG_MMCSD_NSLOTS
|
||||
# Number of MMC/SD slots supported by the driver
|
||||
# CONFIG_MMCSD_READONLY
|
||||
# Provide read-only access (default is read/write)
|
||||
CONFIG_MMCSD_NSLOTS=1
|
||||
CONFIG_MMCSD_READONLY=n
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
# CONFIG_NET - Enable or disable all network features
|
||||
|
|
@ -322,23 +391,314 @@ CONFIG_NET_BROADCAST=n
|
|||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
# CONFIG_USBDEV
|
||||
# Enables USB device support
|
||||
# CONFIG_USBDEV_ISOCHRONOUS
|
||||
# Build in extra support for isochronous endpoints
|
||||
# CONFIG_USBDEV_DUALSPEED
|
||||
# Hardware handles high and full speed operation (USB 2.0)
|
||||
# CONFIG_USBDEV_SELFPOWERED
|
||||
# Will cause USB features to indicate that the device is
|
||||
# self-powered
|
||||
# CONFIG_USBDEV_MAXPOWER
|
||||
# Maximum power consumption in mA
|
||||
# CONFIG_USBDEV_TRACE
|
||||
# Enables USB tracing for debug
|
||||
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||
# Number of trace entries to remember
|
||||
CONFIG_USBDEV=n
|
||||
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||
CONFIG_USBDEV_DUALSPEED=n
|
||||
CONFIG_USBDEV_SELFPOWERED=y
|
||||
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||
CONFIG_USBDEV_MAXPOWER=100
|
||||
CONFIG_USBDEV_TRACE=n
|
||||
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||
|
||||
#
|
||||
# USB Serial Device Configuration
|
||||
#
|
||||
# CONFIG_USBSER
|
||||
# Enable compilation of the USB serial driver
|
||||
# CONFIG_USBSER_EPINTIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# interrupt IN operation
|
||||
# CONFIG_USBSER_EPBULKOUT
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk OUT operation
|
||||
# CONFIG_USBSER_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk IN operation
|
||||
# CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||
# Size of the serial receive/transmit buffers
|
||||
CONFIG_USBSER=n
|
||||
CONFIG_USBSER_EPINTIN=1
|
||||
CONFIG_USBSER_EPBULKOUT=2
|
||||
CONFIG_USBSER_EPBULKIN=5
|
||||
CONFIG_USBSER_NWRREQS=4
|
||||
CONFIG_USBSER_NRDREQS=4
|
||||
CONFIG_USBSER_VENDORID=0x067b
|
||||
CONFIG_USBSER_PRODUCTID=0x2303
|
||||
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||
CONFIG_USBSER_RXBUFSIZE=512
|
||||
CONFIG_USBSER_TXBUFSIZE=512
|
||||
|
||||
#
|
||||
# USB Storage Device Configuration
|
||||
#
|
||||
# CONFIG_USBSTRG
|
||||
# Enable compilation of the USB storage driver
|
||||
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||
# Max packet size for endpoint 0
|
||||
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoints that support
|
||||
# bulk OUT and IN operations
|
||||
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||
# The size of the buffer in each write/read request. This
|
||||
# value needs to be at least as large as the endpoint
|
||||
# maxpacket and ideally as large as a block device sector.
|
||||
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSTRG_REMOVABLE
|
||||
# Select if the media is removable
|
||||
CONFIG_USBSTRG=n
|
||||
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||
CONFIG_USBSTRG_EPBULKOUT=2
|
||||
CONFIG_USBSTRG_EPBULKIN=5
|
||||
CONFIG_USBSTRG_NRDREQS=2
|
||||
CONFIG_USBSTRG_NWRREQS=2
|
||||
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||
CONFIG_USBSTRG_VENDORID=0x584e
|
||||
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||
CONFIG_USBSTRG_REMOVABLE=y
|
||||
|
||||
#
|
||||
# CONFIG_NX
|
||||
# Enables overall support for graphics library and NX
|
||||
# CONFIG_NX_MULTIUSER
|
||||
# Configures NX in multi-user mode
|
||||
# CONFIG_NX_NPLANES
|
||||
# Some YUV color formats requires support for multiple planes,
|
||||
# one for each color component. Unless you have such special
|
||||
# hardware, this value should be undefined or set to 1
|
||||
# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP,
|
||||
# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP,
|
||||
# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and
|
||||
# CONFIG_NX_DISABLE_32BPP
|
||||
# NX supports a variety of pixel depths. You can save some
|
||||
# memory by disabling support for unused color depths.
|
||||
# CONFIG_NX_PACKEDMSFIRST
|
||||
# If a pixel depth of less than 8-bits is used, then NX needs
|
||||
# to know if the pixels pack from the MS to LS or from LS to MS
|
||||
# CONFIG_NX_MOUSE
|
||||
# Build in support for mouse input
|
||||
# CONFIG_NX_KBD
|
||||
# Build in support of keypad/keyboard input
|
||||
# CONFIG_NXTK_BORDERWIDTH
|
||||
# Specifies with with of the border (in pixels) used with
|
||||
# framed windows. The default is 4.
|
||||
# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2
|
||||
# Specify the colors of the border used with framed windows.
|
||||
# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so
|
||||
# is normally darker. The default is medium and dark grey,
|
||||
# respectively
|
||||
# CONFIG_NXTK_AUTORAISE
|
||||
# If set, a window will be raised to the top if the mouse position
|
||||
# is over a visible portion of the window. Default: A mouse
|
||||
# button must be clicked over a visible portion of the window.
|
||||
# CONFIG_NXFONTS_CHARBITS
|
||||
# The number of bits in the character set. Current options are
|
||||
# only 7 and 8. The default is 7.
|
||||
# CONFIG_NXFONT_SANS
|
||||
# At present, there is only one font. But if there were were more,
|
||||
# then this option would select the sans serif font.
|
||||
#
|
||||
# NX Multi-user only options:
|
||||
#
|
||||
# CONFIG_NX_BLOCKING
|
||||
# Open the client message queues in blocking mode. In this case,
|
||||
# nx_eventhandler() will not return until a message is received and processed.
|
||||
# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS
|
||||
# Specifies the maximum number of messages that can fit in
|
||||
# the message queues. No additional resources are allocated, but
|
||||
# this can be set to prevent flooding of the client or server with
|
||||
# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many
|
||||
# messages are pre-allocated).
|
||||
#
|
||||
CONFIG_NX=n
|
||||
CONFIG_NX_MULTIUSER=n
|
||||
CONFIG_NX_NPLANES=1
|
||||
CONFIG_NX_DISABLE_1BPP=y
|
||||
CONFIG_NX_DISABLE_2BPP=y
|
||||
CONFIG_NX_DISABLE_4BPP=y
|
||||
CONFIG_NX_DISABLE_8BPP=n
|
||||
CONFIG_NX_DISABLE_16BPP=y
|
||||
CONFIG_NX_DISABLE_24BPP=y
|
||||
CONFIG_NX_DISABLE_32BPP=y
|
||||
CONFIG_NX_PACKEDMSFIRST=n
|
||||
CONFIG_NX_MOUSE=y
|
||||
CONFIG_NX_KBD=y
|
||||
#CONFIG_NXTK_BORDERWIDTH=4
|
||||
#CONFIG_NXTK_BORDERCOLOR1
|
||||
#CONFIG_NXTK_BORDERCOLOR2
|
||||
CONFIG_NXTK_AUTORAISE=n
|
||||
CONFIG_NXFONT_SANS=y
|
||||
CONFIG_NXFONTS_CHARBITS=7
|
||||
CONFIG_NX_BLOCKING=y
|
||||
CONFIG_NX_MXSERVERMSGS=32
|
||||
CONFIG_NX_MXCLIENTMSGS=16
|
||||
|
||||
#
|
||||
# Settings for examples/uip
|
||||
CONFIG_EXAMPLE_UIP_IPADDR=(192<<24|168<<16|0<<8|128)
|
||||
CONFIG_EXAMPLE_UIP_DRIPADDR=(192<<24|168<<16|0<<8|1)
|
||||
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLE_UIP_SMTP=n
|
||||
CONFIG_EXAMPLE_UIP_TELNETD=n
|
||||
CONFIG_EXAMPLE_UIP_WEBSERVER=y
|
||||
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||
CONFIG_EXAMPLE_UIP_WEBCLIENT=n
|
||||
|
||||
#
|
||||
# Settings for examples/nettest
|
||||
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||
CONFIG_EXAMPLE_NETTEST_IPADDR=(192<<24|168<<16|0<<8|128)
|
||||
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(192<<24|168<<16|0<<8|1)
|
||||
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(192<<24|168<<16|0<<8|106)
|
||||
|
||||
#
|
||||
# Settings for examples/ostest
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=256
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
|
||||
#
|
||||
# Settings for examples/nsh
|
||||
#
|
||||
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||
#
|
||||
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||
#
|
||||
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||
CONFIG_EXAMPLES_NSH_STACKSIZE=1024
|
||||
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_EXAMPLES_NSH_CMD_SIZE=40
|
||||
CONFIG_EXAMPLES_NSH_STACKSIZE=512
|
||||
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||
|
||||
#
|
||||
# Architecture-specific NSH options
|
||||
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1
|
||||
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Settings for examples/nx
|
||||
#
|
||||
# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame-
|
||||
# buffer driver for use in the test. Default: 0
|
||||
# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on
|
||||
# CONFIG_EXAMPLES_NX_BPP.
|
||||
# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on
|
||||
# CONFIG_EXAMPLES_NX_BPP.
|
||||
# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on
|
||||
# CONFIG_EXAMPLES_NX_BPP.
|
||||
# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on
|
||||
# CONFIG_EXAMPLES_NX_BPP.
|
||||
# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on
|
||||
# CONFIG_EXAMPLES_NX_BPP.
|
||||
# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options
|
||||
# include 2, 4, 8, 16, 24, and 32. Default is 32.
|
||||
# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to
|
||||
# use pretty, framed NXTK windows with toolbars.
|
||||
# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating
|
||||
# the NX server. Default 2048
|
||||
# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80
|
||||
# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120
|
||||
# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with
|
||||
# nx_eventnotify(). Default: 4
|
||||
CONFIG_EXAMPLES_NX_VPLANE=0
|
||||
#CONFIG_EXAMPLES_NX_BGCOLOR
|
||||
#CONFIG_EXAMPLES_NX_COLOR1
|
||||
#CONFIG_EXAMPLES_NX_COLOR2
|
||||
#CONFIG_EXAMPLES_NX_TBCOLOR
|
||||
#CONFIG_EXAMPLES_NX_FONTCOLOR
|
||||
CONFIG_EXAMPLES_NX_BPP=CONFIG_SIM_FBBPP
|
||||
CONFIG_EXAMPLES_NX_RAWWINDOWS=n
|
||||
CONFIG_EXAMPLES_NX_STACKSIZE=8192
|
||||
CONFIG_EXAMPLES_NX_CLIENTPRIO=80
|
||||
CONFIG_EXAMPLES_NX_SERVERPRIO=120
|
||||
CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
|
||||
|
||||
#
|
||||
# Settings for examples/mount
|
||||
CONFIG_EXAMPLES_MOUNT_DEVNAME="/dev/ram0"
|
||||
#CONFIG_EXAMPLES_MOUNT_NSECTORS=2048
|
||||
#CONFIG_EXAMPLES_MOUNT_SECTORSIZE=512
|
||||
#CONFIG_EXAMPLES_MOUNT_RAMDEVNO=1
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
|
|
@ -362,9 +722,10 @@ CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
|||
#
|
||||
CONFIG_BOOT_FROM_FLASH=n
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
CONFIG_IDLETHREAD_STACKSIZE=256
|
||||
CONFIG_USERMAIN_STACKSIZE=256
|
||||
CONFIG_PTHREAD_STACK_MIN=128
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=256
|
||||
CONFIG_HEAP_SIZE=
|
||||
CONFIG_STACK_POINTER=
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=1024
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=1024
|
||||
CONFIG_HEAP_BASE=
|
||||
CONFIG_HEAP_SIZE=
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/bin/bash
|
||||
# configs/ez80f910200kitg/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -44,7 +44,7 @@ fi
|
|||
# Instead, alias are provided for all of the ZDS-II command line tools.
|
||||
# Version 4.10.1 installed in the default location is assumed here.
|
||||
#
|
||||
ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.10.1/bin"
|
||||
ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.11.1/bin"
|
||||
alias ez8asm="${ZDSBINDIR}/ez8asm.exe"
|
||||
alias ez8cc="${ZDSBINDIR}/ez8cc.exe"
|
||||
alias ez8lib="${ZDSBINDIR}/ez8lib.exe"
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
############################################################################
|
||||
# configs/ez80f910200zco/nettest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -37,7 +37,8 @@ include ${TOPDIR}/.config
|
|||
|
||||
# These are the directories where the ZDS-II toolchain is installed
|
||||
|
||||
ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.11.0
|
||||
ZDSVERSION := 4.11.1
|
||||
ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION)
|
||||
ZDSBINDIR := $(ZDSINSTALLDIR)/bin
|
||||
ZDSSTDINCDIR := $(ZDSINSTALLDIR)/include/std
|
||||
ZDSZILOGINCDIR := $(ZDSINSTALLDIR)/include/zilog
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
############################################################################
|
||||
# configs/ez80f910200zco/nettest/defconfig
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -58,8 +58,7 @@
|
|||
# Define if the architecture suports prioritizaton of interrupts
|
||||
# and the up_prioritize_irq() API.
|
||||
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||
# CONFIG_ENDIAN_BIG - Define for big-endian operation
|
||||
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||
# CONFIG_ENDIAN_BIG - Define for big endian (default is little endian)
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
# CONFIG_ARCH_BUTTONS - Provide button APIs. Unique to board architecture.
|
||||
|
|
@ -84,7 +83,7 @@ CONFIG_ARCH_BUTTONS=n
|
|||
CONFIG_ARCH_TIMERHOOK=y
|
||||
|
||||
#
|
||||
# eZ8 specific device driver settings
|
||||
# eZ80 specific device driver settings
|
||||
#
|
||||
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
# console and ttyS0 (default is the UART0).
|
||||
|
|
@ -203,13 +202,13 @@ CONFIG_ARCH_LOWPUTC=y
|
|||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2008
|
||||
CONFIG_START_MONTH=12
|
||||
CONFIG_START_DAY=7
|
||||
CONFIG_START_YEAR=2009
|
||||
CONFIG_START_MONTH=2
|
||||
CONFIG_START_DAY=25
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_HAVE_LOWUARTINIT=y
|
||||
CONFIG_DEV_CONSOLE=n
|
||||
CONFIG_DEV_LOWCONSOLE=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/****************************************************************************/
|
||||
/* configs/ez80f910200zco/nettest/nettest.linkcmd */
|
||||
/* */
|
||||
/* Copyright (C) 2008 Gregory Nutt. All rights reserved. */
|
||||
/* Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. */
|
||||
/* Author: Gregory Nutt <spudmonkey@racsa.co.cr> */
|
||||
/* */
|
||||
/* Redistribution and use in source and binary forms, with or without */
|
||||
|
|
@ -35,12 +35,12 @@
|
|||
|
||||
-FORMAT=OMF695,INTEL32
|
||||
-map -maxhexlen=64 -quiet -NOwarnoverlap -xref -unresolved=fatal
|
||||
-sort NAME=ascending -warn -NOdebug -NOigcase
|
||||
-sort ADDRESS=ascending -warn -NOdebug -NOigcase
|
||||
|
||||
RANGE ROM $000000 : $03FFFF
|
||||
RANGE RAM $B80000 : $BFFFFF
|
||||
RANGE EXTIO $0 : $FFFF
|
||||
RANGE INTIO $0 : $FF
|
||||
RANGE EXTIO $000000 : $00FFFF
|
||||
RANGE INTIO $000000 : $0000FF
|
||||
|
||||
CHANGE STRSECT is ROM
|
||||
|
||||
|
|
@ -83,7 +83,7 @@ DEFINE __FLASH_ADDR_U_INIT_PARAM = $00
|
|||
|
||||
define _SYS_CLK_FREQ = 50000000
|
||||
|
||||
define _OSC_FREQ = 5000000
|
||||
define _OSC_FREQ = 50000000
|
||||
define _SYS_CLK_SRC = 0
|
||||
define _OSC_FREQ_MULT = 1
|
||||
define __PLL_CTL0_INIT_PARAM = $40
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
<project type="Executable" project-type="Standard" configuration="Debug" created-by="c:4.11:07071801" modified-by="c:4.11:07071801">
|
||||
<project type="Executable" project-type="Standard" configuration="Debug" created-by="c:4.11:07071801" modified-by="c:4.11:08011102">
|
||||
<cpu>eZ80F91</cpu>
|
||||
|
||||
<!-- file information -->
|
||||
|
|
@ -12,7 +12,7 @@
|
|||
<tools>
|
||||
<tool name="Assembler">
|
||||
<options>
|
||||
<option name="define" type="string" change-action="assemble">_EZ80ACCLAIM!=1,_SIMULATE=1</option>
|
||||
<option name="define" type="string" change-action="assemble">_EZ80ACCLAIM!=1</option>
|
||||
<option name="include" type="string" change-action="assemble"></option>
|
||||
<option name="list" type="boolean" change-action="none">true</option>
|
||||
<option name="listmac" type="boolean" change-action="none">false</option>
|
||||
|
|
@ -25,7 +25,7 @@
|
|||
</tool>
|
||||
<tool name="Compiler">
|
||||
<options>
|
||||
<option name="define" type="string" change-action="compile">_DEBUG,_EZ80F91,_EZ80ACCLAIM!,_SIMULATE</option>
|
||||
<option name="define" type="string" change-action="compile">_DEBUG,_EZ80F91,_EZ80ACCLAIM!</option>
|
||||
<option name="genprintf" type="boolean" change-action="compile">false</option>
|
||||
<option name="keepasm" type="boolean" change-action="none">false</option>
|
||||
<option name="keeplst" type="boolean" change-action="none">true</option>
|
||||
|
|
@ -42,22 +42,22 @@
|
|||
</tool>
|
||||
<tool name="Debugger">
|
||||
<options>
|
||||
<option name="target" type="string" change-action="rebuild">eZ80F91ModDevKit_Flash</option>
|
||||
<option name="debugtool" type="string" change-action="none">Simulator</option>
|
||||
<option name="target" type="string" change-action="rebuild">eZ80DevPlatform_F91_Flash</option>
|
||||
<option name="debugtool" type="string" change-action="none">USBSmartCable</option>
|
||||
<option name="usepageerase" type="boolean" change-action="none">true</option>
|
||||
</options>
|
||||
</tool>
|
||||
<tool name="FlashProgrammer">
|
||||
<options>
|
||||
<option name="erasebeforeburn" type="boolean" change-action="none">false</option>
|
||||
<option name="erasebeforeburn" type="boolean" change-action="none">true</option>
|
||||
<option name="eraseinfopage" type="boolean" change-action="none">false</option>
|
||||
<option name="enableinfopage" type="boolean" change-action="none">false</option>
|
||||
<option name="includeserial" type="boolean" change-action="none">false</option>
|
||||
<option name="offset" type="integer" change-action="none">0</option>
|
||||
<option name="snenable" type="boolean" change-action="none">false</option>
|
||||
<option name="sn" type="string" change-action="none">0</option>
|
||||
<option name="snsize" type="integer" change-action="none">0</option>
|
||||
<option name="snstep" type="integer" change-action="none">0</option>
|
||||
<option name="sn" type="string" change-action="none">000000000000000000000000</option>
|
||||
<option name="snsize" type="integer" change-action="none">1</option>
|
||||
<option name="snstep" type="integer" change-action="none">000000000000000000000000</option>
|
||||
<option name="snstepformat" type="integer" change-action="none">0</option>
|
||||
<option name="snaddress" type="string" change-action="none">0</option>
|
||||
<option name="snformat" type="integer" change-action="none">0</option>
|
||||
|
|
@ -95,18 +95,18 @@
|
|||
<option name="relist" type="boolean" change-action="build">false</option>
|
||||
<option name="startuptype" type="string" change-action="build">Included</option>
|
||||
<option name="startuplnkcmds" type="boolean" change-action="build">true</option>
|
||||
<option name="usecrun" type="boolean" change-action="build">true</option>
|
||||
<option name="usecrun" type="boolean" change-action="build">false</option>
|
||||
<option name="warnoverlap" type="boolean" change-action="none">true</option>
|
||||
<option name="xref" type="boolean" change-action="none">true</option>
|
||||
<option name="undefisfatal" type="boolean" change-action="none">true</option>
|
||||
<option name="warnisfatal" type="boolean" change-action="none">false</option>
|
||||
<option name="sort" type="string" change-action="none">NAME</option>
|
||||
<option name="sort" type="string" change-action="none">ADDRESS</option>
|
||||
<option name="padhex" type="boolean" change-action="build">false</option>
|
||||
<option name="fplib" type="string" change-action="build">Real</option>
|
||||
<option name="useadddirectives" type="boolean" change-action="build">false</option>
|
||||
<option name="linkconfig" type="string" change-action="build">Standard</option>
|
||||
<option name="flashinfo" type="string" change-action="build">000000-0001FF</option>
|
||||
<option name="ram" type="string" change-action="build">B7E000-B7FFFF</option>
|
||||
<option name="ram" type="string" change-action="build">B8000-BfFFFF</option>
|
||||
<option name="rom" type="string" change-action="build">000000-03FFFF</option>
|
||||
<option name="extio" type="string" change-action="build">000000-00FFFF</option>
|
||||
<option name="intio" type="string" change-action="build">000000-0000FF</option>
|
||||
|
|
@ -244,4 +244,4 @@
|
|||
<breakpoints>
|
||||
</breakpoints>
|
||||
|
||||
</project>
|
||||
</project>
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
#!/bin/bash
|
||||
# configs/ez80f910200zco/nettest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -44,7 +44,7 @@ fi
|
|||
# Instead, alias are provided for all of the ZDS-II command line tools.
|
||||
# Version 4.10.1 installed in the default location is assumed here.
|
||||
#
|
||||
ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.10.1/bin"
|
||||
ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.11.1/bin"
|
||||
alias ez8asm="${ZDSBINDIR}/ez8asm.exe"
|
||||
alias ez8cc="${ZDSBINDIR}/ez8cc.exe"
|
||||
alias ez8lib="${ZDSBINDIR}/ez8lib.exe"
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
############################################################################
|
||||
# configs/ez80f910200zco/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
############################################################################
|
||||
# configs/ez80f910200zco/ostest/defconfig
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -58,8 +58,7 @@
|
|||
# Define if the architecture suports prioritizaton of interrupts
|
||||
# and the up_prioritize_irq() API.
|
||||
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||
# CONFIG_ENDIAN_BIG - Define for big-endian operation
|
||||
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||
# CONFIG_ENDIAN_BIG - Define for big endian (default is little endian)
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
# CONFIG_ARCH_BUTTONS - Provide button APIs. Unique to board architecture.
|
||||
|
|
@ -84,7 +83,7 @@ CONFIG_ARCH_BUTTONS=n
|
|||
CONFIG_ARCH_TIMERHOOK=y
|
||||
|
||||
#
|
||||
# eZ8 specific device driver settings
|
||||
# eZ80 specific device driver settings
|
||||
#
|
||||
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
# console and ttyS0 (default is the UART0).
|
||||
|
|
@ -203,9 +202,9 @@ CONFIG_ARCH_LOWPUTC=y
|
|||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2008
|
||||
CONFIG_START_MONTH=12
|
||||
CONFIG_START_DAY=7
|
||||
CONFIG_START_YEAR=2009
|
||||
CONFIG_START_MONTH=2
|
||||
CONFIG_START_DAY=25
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_HAVE_LOWUARTINIT=y
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/****************************************************************************/
|
||||
/* configs/ez80f910200zco/ostest/ostest.linkcmd */
|
||||
/* */
|
||||
/* Copyright (C) 2008 Gregory Nutt. All rights reserved. */
|
||||
/* Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. */
|
||||
/* Author: Gregory Nutt <spudmonkey@racsa.co.cr> */
|
||||
/* */
|
||||
/* Redistribution and use in source and binary forms, with or without */
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#!/bin/bash
|
||||
# configs/ez80f910200zco/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue