Adds a defconfig for using MPU60x0 and implement the bringup sequence for the I2C IMU.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
This change affects esp32s2-saola-1 board when optimizations are enabled.
Fixes issue on timer defconfig.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
script
Add missing flash_qio_mode file in bootloader link script, it will be
used when CONFIG_ESPRESSIF_FLASH_MODE_QIO option is enabled.
Signed-off-by: Leo Chung <gewalalb@gmail.com>
script
Add missing flash_qio_mode file in bootloader link script, it will be
used when CONFIG_ESPRESSIF_FLASH_MODE_QIO option is enabled.
Signed-off-by: Leo Chung <gewalalb@gmail.com>
script
Add missing flash_qio_mode file in bootloader link script, it will be
used when CONFIG_ESPRESSIF_FLASH_MODE_QIO option is enabled.
Signed-off-by: Leo Chung <gewalalb@gmail.com>
Changed usbhost stack sizes to 2048 for affected STM32H7 boards.
This was previously causing stack overflows when usb is inserted.
Signed-off-by: keever50 <kevinwit1999@gmail.com>
Nimble defconfig had USB Serial as default console. This changes makes it compatible
to ESP32C3-Devkit and makes it similar to other defconfigs.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
This commit introduces initial support for the Seeed Studio XIAO ESP32C3
board. Five configurations are available:
- nsh: Basic NuttShell support over UART0
- usbnsh: Basic NuttShell support over USB
- gpio: NuttShell over USB + GPIO
- wifi: NuttShell over USB + Wifi support
- ble: NuttShell over SUB + Bluetooth support
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
This commit adds support for the LCD based on ST7735 controller on
the STM32F401RC-RS485 board and updates the board documentation accordingly.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
This commit adds sections used by the debugger and disassembler to
get more information about raw data present in the code.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit sets the coexiram (from libcoexist.a) sections on IRAM.
Before this commit, no other rules matched such sections and the
sections could be placed outside markers that denote the end of the
text sections, causing unexpected errors.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds new fields to the metadata section used by MCUBoot.
The openocd-esp32 project requires these fields to properly map the
flash segments and enable using SW breakpoints and flash through
openocd-esp32.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds new fields to the metadata section used by MCUBoot.
The openocd-esp32 project requires these fields to properly map the
flash segments and enable using SW breakpoints and flash through
openocd-esp32.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds new fields to the metadata section used by MCUBoot.
The openocd-esp32 project requires these fields to properly map the
flash segments and enable using SW breakpoints and flash through
openocd-esp32.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds new fields to the metadata section used by MCUBoot.
The openocd-esp32 project requires these fields to properly map the
flash segments and enable using SW breakpoints and flash through
openocd-esp32.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds new fields to the metadata section used by MCUBoot.
The openocd-esp32 project requires these fields to properly map the
flash segments and enable using SW breakpoints and flash through
openocd-esp32.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds new fields to the metadata section used by MCUBoot.
The openocd-esp32 project requires these fields to properly map the
flash segments and enable using SW breakpoints and flash through
openocd-esp32.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Adds adc defconfig and board support for: esp32c3-generic, esp32c6-devkitc and esp32h2-devkit.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Adds adc defconfig and board support for: esp32-devkitc, esp32s2-saola-1 and esp32s3-devkit.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
This commit fixes the SPI flash MTD block device number if OTA's
partitions are present. In this case, the OTA partitions are
registered first and the corresponding MTD block device drivers
are assigned with the numbers corresponding to those partitions.
Then, the additional SPI flash partition should consider that when
registering its own corresponding MTD block device driver.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
This commit introduces initial support for the Seeed Studio XIAO ESP32S3
board. Two configurations are available: 'usbnsh' provides basic NuttShell
(NSH) access over USB, while 'combo' adds support for GPIOs and onboard
LED in addition to NSH.
test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Unify liker scripts for all stm32f0l0g0.
This fixes crash due to unaligned access to rodata for these boards.
Signed-off-by: raiden00pl <raiden00@railab.me>
Remove legacy I2S implementation without breaking defconfigs for Xtensa based Espressif devices
Signed-off-by: Eren Terzioglu <eren.terzioglu@espressif.com>
The defconfigs that select the ESP32-S3's WROOM-2-N32R8V module
contains an octal SPI flash chip and a octal SPIRAM module.
This commit updates the defconfig to avoid errors while booting the
device.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
SPI flash operation modes - Dual Output (dout), Dual I/O (dio),
Quad Output (qout), Quad I/O (qio) and Octal (opi) were not being
properly selected. This commit fixes this behavior and the device
is now able to boot and initialize the proper SPI flash mode.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Support for development using STM32H750B-DK, including configuration of onboard memory, flash, etc., and configuration of LVGL runtime environment has been added.
Signed-off-by: liujp <liujp@xiaomi.com>
boards/arm: Add CMakeLists for the nucleo-l476rg.
Adds CMakeLists files for the STM32L4 architectures
and one of the development boards. Files are adapted
from the similar STM32F7 boards, but built to reflect
the existing Make.defs.
Signed-off-by: Kye Morton <pryre.dev@outlook.com>
This commit adds support for the BMP180 sensor on the
STM32F401RC-RS485 board and updates the board documentation
accordingly. It also enables the BMP180 UORB driver in the
STM32 common logic.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
