This commit introduces the tagging system into the STM32 family of chips
by tagging all chips with their appropriate chip type/family.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Add kernel build (target imx93-evk:knsh) to i.MX93 EVK.
This target is preconfigured for use with AHAB boot (see
https://spsdk.readthedocs.io/en/latest/examples/ahab/imx93/imx93_ahab_uboot.html)
as a replacement of U-Boot proper (BL33 at EL2), hence
the load address is set to 0x80200000.
Signed-off-by: George Poulios <gpoulios@census-labs.com>
Introduces `sphinx-tags` to the documentation system, allowing
individual pages to be tagged for better searching. The examples in this
commit introduce the `chip:*` tag for indicating the chip a board uses,
as well as the `experimental` tag for indicating experimental boards and
features. Other tags indicate supported peripherals for boards, such as
`wifi` and `ethernet`.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
This commit adds the documentation for the Seeed Studio XIAO ESP32C3
board. It includes examples for GPIOs, Wifi and BT.
Signed-off-by: Rodrigo Sim rcsim10@gmail.com
This commit adds support for the LCD based on ST7735 controller on
the STM32F401RC-RS485 board and updates the board documentation accordingly.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
It is not recommend to just copy defconfig to .config instead of
running ./tools/configure.sh. The configure script will do more
than just copying the defconfig, it will create backup config,
it will check if apps/ dir exists, etc.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This updated the command used for running the openocd-esp32 for
all the supported Espressif's SoCs. It enables using SW-defined
breakpoints.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
This commit adds support for the BMP180 sensor on the
STM32F401RC-RS485 board and updates the board documentation
accordingly. It also enables the BMP180 UORB driver in the
STM32 common logic.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
Use configuration CDCACM_DISABLE_TXBUF or CDCACM_DISABLE_RXBUF to choose
whether to use usb req buffer as the serial buffer. Since the default
value is n (not using req buf), the original configuration of buf is valid.
This reverts commit 21c8ed80bd.
This PR adds support for the PINE64 Yuzuki Avaota-A1 SBC,
based on Allwinner A527 Arm64 SoC.
Most of the code was derived from NuttX for
QEMU Arm64 Kernel Build qemu-armv8a:knsh.
The modified code is explained here:
https://lupyuen.github.io/articles/avaota#appendix-port-nuttx-to-avaota-a1
platforms/arm64/a527/index.rst:
Added Avaota-A1 to Allwinner A527 SoC
platforms/arm64/a527/boards/avaota-a1/avaota-a1.jpg:
Photo of Avaota-A1, taken by me
platforms/arm64/a527/boards/avaota-a1/index.rst:
Building and booting NuttX for Avaota-A1
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
Change the ESP32S3-WROOM-2-N16R8V to ESP32S3-WROOM-1-N8R2.
Reason: not testing on 16MB but successfully tested smaller flash and PSRAM.
Also updated documentation on this defconfig.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Modify addressing to allow only 2 byte node address.
Allow modifying the node address by modifying the ipv6 address
(the ipv6 address has a direct relation with the node address)
Introduce the option to add a 4 byte random number to the mac header
as a preparation for ciphered data exchange.
Introduce a FCB (frame control byte) as a replacement for the INFO
field in the mac header.
Update esp32-devkitc:espnow config to reflect address size change.
Update the documentation to reflect address size changes.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This PR adds support for the Allwinner A527 Arm64 SoC.
This will be used by the upcoming port of NuttX for
PINE64 Yuzuki Avaota-A1 SBC.
Most of the code was derived from NuttX for
QEMU Arm64 Kernel Build qemu-armv8a:knsh.
The modified code is explained here:
https://lupyuen.github.io/articles/avaota#appendix-port-nuttx-to-avaota-a1
platforms/arm64/a527/index.rst: Added A527 SoC
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
