When using include command in defconfig, it is necessary to support overwriting the configuration in other files
kconfig-conf only prints warnings, but does not return errors
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
When some coverage files cannot be parsed correctly,
skip the current error file and continue to generate coverage report
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
To speed up the CI Workflow, this PR splits the CI Build Jobs for RISC-V into smaller jobs. Each job will now complete within 1 hour.
Before the PR: There are 2 jobs for RISC-V, each requiring more than 1.5 hours
- `risc-v-01` (1 hour 42 mins): BL602, Ox64, ESP32-C3 / C6 / H2
- `risc-v-02` (1 hour 41 mins): K230, Icicle, QEMU, RV32M1-Vega
After the PR: The build is spread across 6 jobs for RISC-V, each job completes within 1 hour
- `risc-v-01` (19 mins): BL602, Ox64
- `risc-v-02` (44 mins): ESP32-C3
- `risc-v-03` (45 mins): ESP32-C6, ESP32-H2
- `risc-v-04` (31 mins): K230, Icicle
- `risc-v-05` (41 mins): QEMU CITest
- `risc-v-06` (38 mins): Rest of QEMU, RV32M1-Vega
Following the same convention as the Arm32 Build Jobs, the above jobs are sorted by Target Name. Performance of the RISC-V Build Jobs is discussed in https://github.com/apache/nuttx/issues/13775
Check g_altpath. If only the CURRENT path is included,
the obj target use its own full path, otherwise just use the filename.
add default value current path for obj-path.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
patches ending with cmake should be checked.
Currently, any non-cmake files containing cmake keywords will be checked.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
CI Build Job `arm-05` (runtime 2 hours) has become the Performance Bottleneck for CI Workflow. That's because `arm-05` builds too many targets for nRF, RP2040, SAM 3, SAM A and SAM D. This PR splits `arm-05` into multiple smaller jobs, to reduce the CI Build Duration.
Before the PR: `arm-05` is overloaded, build requires 2 hours
- `arm-05` (2 hours): nRF, RP2040, SAM 3, SAM A, SAM D
- `arm-06` (56 mins): STM32 [a-m]*
After the PR: `arm-05` is offloaded (to `arm-06` and `arm-07`), completes within 1 hour
- `arm-05` (47 mins): nRF
- `arm-06` (1 hour): Reserve for RP2040 exclusively
- `arm-07` (1 hour 15 mins): SAM 3, SAM A, SAM D, STM32 [a-m]*
Build Jobs are sorted by Target Name. So we cascade the changes and rename the Build Jobs: `arm-07` becomes `arm-08`, `arm-08` becomes `arm-09` etc. Then `arm-13` becomes a new job `arm-14`. (Which we added to `build.yml`)
Performance of `arm-05` is discussed in https://github.com/apache/nuttx/issues/13775 and https://github.com/apache/nuttx/issues/12773
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
Add the new symbol `NativeSymbol` to the white list,
and update the comments about the symbols that are
from WAMR project.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
This script seems to assume GNU grep, which is not commonly
available as "grep" on some platforms. For examples, it's
more common to have it named "ggrep" on BSD-based systems
including macOS.
Ideally, I suppose we should avoid GNU dependencies like this
in general. But I'm not motivated enough to rewrite this script
in a portable way today.
cf. https://www.gnu.org/software/grep/manual/grep.html#grep-Programs-1
Switch wget to cURL tool for:
arm_gcc_toolchain()
arm64_gcc_toolchain()
gperf()
riscv_gcc_toolchain()
sparc_gcc_toolchain()
xtensa_esp32_gcc_toolchain()
wasi_sdk()
Used git clone --depth 1 a shallow clone with a history truncated to reduce the clone size for:
kconfig_frontends()
added ninja installation
Switch wget to cURL tool for:
arm_gcc_toolchain()
arm64_gcc_toolchain()
riscv_gcc_toolchain()
sparc_gcc_toolchain()
xtensa_esp32_gcc_toolchain()
xtensa_esp32s2_gcc_toolchain()
xtensa_esp32s3_gcc_toolchain()
wasi_sdk()
Used git clone --depth 1 a shallow clone with a history truncated to reduce the clone size for:
kconfig_frontends()
Bumps esptool from 4.7.0 to 4.8.0.
Switch wget to cURL tool
arm_gcc_toolchain()
arm64_gcc_toolchain()
riscv_gcc_toolchain()
sparc_gcc_toolchain()
xtensa_esp32_gcc_toolchain()
xtensa_esp32s2_gcc_toolchain()
xtensa_esp32s3_gcc_toolchain()
Create a shallow clone with a history truncated of
gen_romfs()
kconfig_frontends()
Simple tool to generate the NuttX release notes
tested on Python-3.8.9
Requirements
pip install PyGithub
pip install PyInquirer
pip install tqdm
The following arguments are required for generating a release: release_version, gh_token
Inspired by https://github.com/btashton/nxutils
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The script can decode the backtrace dump, considering the syntax
of the backtrace format (properly handle the dump when SMP is
enabled, for instance) based on chip name or the toolchains's
addr2line tool.
1. Similar to asan, supports single byte out of bounds detection
2. Fix the script to address the issue of not supporting the big end
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Since the size of the shadow area will change during the script merging of global variables, it will lead to unpredictable number of links. After fixing, only three links are required.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. Modify the Kasan global variable script to support array storage of region addresses
2. Due to the lack of formatting in the previous attempt, a formatting script was created
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
The simple improvement is designed to speed up compilation and reduce download errors on github and local.
Added a folder nxtmpdir for storing third-party packages
nuttxworkspace
|
|- nuttx
|- apps
|- nxtmpdir
tools/Unix.mk:
added export NXTMPDIR := $(WSDIR)/nxtmpdir
tools/configure.sh:
added option -S creates the nxtmpdir folder for third-party packages.
tools/Config.mk:
added macro
CLONE - Git clone repository.
CHECK_COMMITSHA - Check if the branch contains the commit SHA-1.
tools/testbuild.sh:
added option -S
For now I added in the folder this package
ESP_HAL_3RDPARTY_URL = https://github.com/espressif/esp-hal-3rdparty.git
ARCH
arch/xtensa/src/esp32/Make.defs
arch/xtensa/src/esp32s2/Make.defs
arch/xtensa/src/esp32s3/Make.defs
arch/risc-v/src/common/espressif/Make.defs
arch/risc-v/src/esp32c3-legacy/Make.defs
but you can also add other packages (maybe also of apps)
maintains the same semantics as Kernel’s module build
and compatible with Kconfiglib implementation.
The problem of kconfiglib not being able to use tri-states is this:
linux is here torvalds/linux@6dd85ff
The module option is extracted from one of the triate three states into a MODULE keyword.
Kconfiglib supports the default implementation of module to be MODULE for compatibility with the linux kernel, and triate degenerates into bool two states
Refer to this code: 061e71f7d7/kconfiglib.py (L4274-L4284)
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Since the introduction of the rp2350, the pico-sdk project has been
re-arranged and elf2uf2 has been merged in to a new 'picotool' binary
which is supplied and installed separately.
Normally ccache places the temporary files in `~/.ccache`, when invoking the container with
`-u <uid>:<gid>`
as e.g. Jenkins does, this might result in a invalid/unknown home folder.
Thus ccache tries to write to `/.ccache` which doesn't exist and the user doesn't have any permissions.
Explicitly set `CCACHE_DIR` to a folder with appropriate permissions.
Copied spi flash files from risc-v
Removed old spiflash from make.defs
KConfig modifications for common spiflash
Added new spiflash entry to make.defs
S2 Board config update
Modifications working on S2. Need fix on ROM function
Board fixes
Deleted old spiflash files
Fixes for smartfs operation
Set new HAL version
Fixed wrong change on S3
The docker image has not been updated we currently use that one
from 22 days ago.
It seems that the error encountered is due to an incomplete download. It will probably work fine if downloaded again..
https://github.com/apache/nuttx/actions/runs/10619683045/job/29437799464#step:7:1339
28.31
28.31 gzip: stdin: unexpected end of file
28.31 tar: Unexpected EOF in archive
28.32 tar: Unexpected EOF in archive
28.32 tar: Error is not recoverable: exiting now
Trying to reduce the size of the docker image, I found files and folders to be deleted.
For now, I have commented Swift from the Dockerfile because the package is too large.
* Fix nxstyle check so it does not report error on comments on the same
line as if statements
* Rework if statement checks
* Report warning instead of error for is statements check fail
Currently concerns only arm.
tools/ci/testlist/msys2.dat:
At the moment I only added the board nucleo-l152re:nsh
.github/workflows/build.yml:
Enabled cmake for msys2
