To save more space (equivalent to the size of one erase sector of
MTD device) and to achieve faster read and write speeds, a method
for direct writing was introduced at the FTL layer.
This can be accomplished simply by using the following oflags during
the open operation:
1. O_DIRECT. when this flag is passed in, ftl internally uses
the direct write strategy and no read cache is used in ftl;
otherwise, each write will be executed with the minimum
granularity of flash erase sector size which means a
"sector read back - erase sector - write sector" operation
is performed by using a read cache buffer in heap.
2. O_SYNC. When this flag is passed in, we assume that the
flash has been erased in advance and no erasure operation
will be performed internally within ftl. O_SYNC will take
effect only when both O_DIRECT and O_SYNC are passed in
simultaneously.
3. For uniformity, we remapped the mount flag in mount.h and
unified it with the open flag in fcntl.h. The repetitive
parts of their definitions were reused, and the remaining
part of the mount flag redefine to the unused bit of open
flags.
Signed-off-by: jingfei <jingfei@xiaomi.com>
Usage example for merging the factory partition and reserve
partition into the merge partition:
register_merge_blockdriver("/dev/merge", "/dev/factory", "/dev/reserve",
NULL)
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Example:
When executing "df -h" on Core A to view mount information, this
process will traverse inode nodes, thereby holding the inode_lock.
Since the inode type of the mount point may be rpmsgfs, it will fetch statfs
information from another Core B.
Meanwhile, rcS on Core B needs to obtain file information from Core A,
which will be achieved by fetching stat information through rpmsgfs.
When this message arrives at Core A, a deadlock can occur between Core A's
rptun ap and nsh task.
However, both of these places involve read operations only, thus a reader-writer lock
can be utilized to prevent such a deadlock.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
if driver complete unlink ops, we need to call it to release some resource,
otherwise, it will only remove inode.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
A segmentfault might happen when read/write/unlink ops called without an open
ops called because it bind ept's ops in rpmsgblk_open_handler.
proxy> rm /dev/ram1
segmentfault
proxy> ls /dev/ram1
segmentfault
Signed-off-by: liaoao <liaoao@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Both the device and the pipe used the FSNODEFLAG_TYPE_DRIVER type before,
and now add an independent pipe type
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Note: all attributes is guarded by PSEUDOFS_ATTRIBUTES to save the space
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I664d60382e356068fd920f08aca5b4a49d8d92a9
This change reflects that the geometry isn't related to the largest
allocatable unit on the platform.
Calls to read and write block devices are also affected and have
been updated.
on the other hand, open/nx_open call file_open instead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I66990a77cdeb6ff18f7bf48a65bbc7b701dad552
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/driver, fs/aio, fs/nfs, crypto/, and boards/.
Please note: The modified file under fs/nfs generates several " Mixed case identifier found" errors. Please ignore these. These cannot be fixed without changes to numerous other files. They also follow a non-standard convention that is used many files: Using lower case structure names in custom SIZEOF_ definitions.
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/inode. Utility functions under fs/incode were modified so the changes do extend to other fs/ sub-directories as well.
