This commit adds simple implementation of guardsize for pthreads.
At this moment this option simply increases the size of allocated pthread stack.
At default pthread guard size is set to 0.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
This commit added CONFIG_TIMER_ADJUST_USEC to support the time compensation for wdog timer. Normally, timer event cannot triggered on exact time due to the existence of interrupt latency. Assuming that the interrupt latency is distributed within [Best-Case Execution Time, Worst-Case Excution Time], we can set the timer adjustment value to the BCET to reduce the latency.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
test:
1.use mps3-an547 build helloxx as module and run it
2.use qemu-armv7a:knsh test kernel build helloxx and run it
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
After pthread mutexes changed to nxmutex, the priority inheritance
was set on by default; even if one tried to control it with
CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_INHERIT.
Also the CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_PROTECT is not effective.
Fix this by setting the default mutex priority adjustment flags according
to CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_INHERIT and CONFIG_PTHREAD_MUTEX_DEFAULT_PRIO_PROTECT.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Coredump doens't need CONFIG_ELF to be enabled, but need elf.h to include correct elf32.h or elf64.h.
Select LIBC_ARCH_ELF in COREDUMP to allow LIBC_ARCH_ELF_64BIT to be
defined correctly.
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
These options are unistd-specific and should not be filesystem dependent,
and also not suitable for define in the sched directory.
Signed-off-by: chao an <anchao.archer@bytedance.com>
1. CONFIG_ARCH_COVERAGE has been replaced by CONFIG_SCHED_GCOV
2. Delete the SIM-specific GCOV_ALL configuration and change it to a universal configuration for all architectures
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
since bootloader may call modlib functions directly
to load elf firmware without binfmt, dlfcn or module.
BTW, this patch also remove the duplicated selecttion
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
gprof can analyze code hot spots based on scheduled sampling.
After adding the "-pg" parameter when compiling, you can view the code call graph.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Do not format immediately when calling sched_note_printf, but delay formatting until dump trace.
After turning on SYSTEM_NOTE, similar asynchronous syslog functions can be achieved.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
Record all memory allocation and release, save to ram, used to analyze memory allocation rate and memory usage
Its absolute value is not trustworthy because the memory will be allocated in thread A and released in thread B
netinit-5 [0] 0.105984392: tracing_mark_write: C|5|Heap Usage|96|free: heap: 0x606000000020 size:24, address: 0x603000000370
netinit-5 [0] 0.105996874: tracing_mark_write: C|5|Heap Usage|24|free: heap: 0x606000000020 size:72, address: 0x6070000008e0
nsh_main-4 [0] 3.825169408: tracing_mark_write: C|4|Heap Usage|2177665|free: heap: 0x606000000020 size:424, address: 0x614000000840
nsh_main-4 [0] 3.825228525: tracing_mark_write: C|4|Heap Usage|14977|free: heap: 0x606000000020 size:2162688, address: 0x7f80a639f800
nsh_main-4 [0] 3.825298789: tracing_mark_write: C|4|Heap Usage|15189|malloc: heap: 0x606000000020 size:20, address: 0x6030000003a0
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
reason:
1 We place interrupt handling functions of the same priority into the work queue corresponding
to that priority, allowing high-priority interrupts to preempt low-priority ones,
thus ensuring the real-time performance of high-priority interrupts.
2 The sole purpose of the interrupt handler is to wake
up the work queue of the corresponding priority and execute the interrupt handling function.
3 Compared to the functionality of isr threads, this
approach saves more memory, particularly when the number of interrupts is large.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
* sched/Kconfig
(INIT_ENTRYPOINT): Document that the signature of "main" must take
"argc" and "argv" or else compilation error results, as discussed in
the email thread below [1].
References:
[1] dev@nuttx.apache.org email thread:
"basically, I get an error when I do make" started 18 Jul 2024,
archived:
https://lists.apache.org/thread/9j2s3647ysdhy204g4ombn4o09bn11c1
and elsewhere.
This adds pre-allocation and dynamic allocations for sigactions.
Current behavior can be acheived by setting SIG_ALLOC_ACTIONS to
a number larger than 1.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
waitpid() cannot be used in kernel mode unless SCHED_HAVE_PARENT is
selected -> add dependency if BUILD_KERNEL is selected.
Why? Because without SCHED_HAVE_PARENT waitpid() works in a non-standard
way, meaning it does not use SIGCHLD to wake the parent, as it should.
Also, returning the child status via stat_loc corrupts memory as stat_loc
points to the parent's address environment:
pid_t nxsched_waitpid(pid_t pid, int *stat_loc, int options)
{
...
group->tg_statloc = stat_loc;
...
}
And later when the status is returned, the child writes to tg_statloc,
which points to the parent's address environment -> random memory
corruption:
static inline void nxtask_exitwakeup(FAR struct tcb_s *tcb, int status)
{
...
if (group->tg_statloc != NULL)
{
*group->tg_statloc = status << 8;
}
...
}
we removed "select SCHED_RESUMESCHEDULER",
As SCHED_RESUMESCHEDULER is not a necessary feature in SMP,
turning it on by default may affect performance.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Usually the startup script is placed under /etc. The contents of the etc directory
are compiled and linked with Nuttx binary in the form of romfs. After startup,
it will be mounted by Nsh.
etc is generated by the different boards, that use genromfs and xxd tools to generate
and compile it into the Nuttx, for example: boards/arm/at32/at32f437-mini/tool/mkromfs.sh
The more common method is etc image generated from the content in the corresponding
board/arch/board/board/src/etc directory, and added by Makefile for example:
boards/sim/sim/sim/src/etc.
But in kernel/protected mode, Nuttx kernel and apps are run in different privileged/
non-privileged mode or the isolated binarys, so as that nsh should use syscall to
access Nuttx kernel by exported API. In this scenario, nsh can not mount the etc image
content, because that is generated in board and as a part of Nuttx kernel.
changes:
- move etc romfs mount from nsh to Nuttx, but keep the script to parse and execute.
- move and rename the related CONFIG, move customized nsh_romfsimg.h to etc_romfs.c
in boards, and no need declaration for romfs_img/romfs_img_len.
This commit changes and updates all configurations in Nuttx arch/board as much as possible,
but if any missing, please refer to the following simple guide:
- rename CONFIG_NSH_ROMFSETC to CONFIG_ETC_ROMFS, and delete CONFIG_NSH_ARCHROMFS in defconfig
- rename the etc romfs mount configs, for example CONFIG_NSH_FATDEVNO to CONFIG_ETC_FATDEVNO
- move customized nsh_romfsimg.h to etc_romfs.c in board/arch/board/board/src and no need
declaration for romfs_img/romfs_img_len.
- delete default nsh_romfsimg.h, if ROMFSETC is enabled, should generate and compile etc_romfs.c
in board/arch/board/board/src.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Usage:
1. CONFIG_FS_PROCFS_MAX_STACK_RECORD > 0, such as 32,
2. add '-finstrument-functions' to CFLAGS for What you want to check
stack.
3. mount porcfs
4. cat /proc/<pid>/stack will print backtace & size
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Previous adjtime() implementation was limited to adjusting system
timer tick period. This commit reimplements the internals to use
a kernel watchdog timer. Platform-independent part of the code now
works also for adjusting hires RTC and tickless timer rate.
User code facing API is unchanged. Architecture code API has changed:
up_adj_timer_period() is replaced by up_adjtime().
Other improvements:
- Support query of remaining adjustment by passing NULL to first
argument of adjtime(). This matches Linux behavior.
- Improve resolution available for architecture driver, previously
limited to 1 microsecond per tick. Now 1 nanosecond per second.
Support smp function call, calling smp_call_function allows
a specific core to execute a function. It should be noted
that there should be no waiting operations in the executed
function.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
