In file_read(), asynchronous reading is supported, so partial reads and the minread parameter are no longer needed.
Signed-off-by: zhongzhijie1 <zhongzhijie1@xiaomi.com>
In btuart_rxwork, There is no case for parsel HCI data of ISO type, but there are corresponding processes in the SIM and vendor driver code.
Signed-off-by: zhongzhijie1 <zhongzhijie1@xiaomi.com>
When the nread return value < 0, if the total length ntotal that has been read is > 0, the function returns ntotal; otherwise, it returns the nread error code.
Signed-off-by: zhongzhijie1 <zhongzhijie1@xiaomi.com>
Read as much data as possible initially, then process each packet individually. Defined the read buffer within the structure and added a rx_len variable to indicate the current read offset. After processing each complete packet, leftover data is moved to rxbuf[0] and rx_len is reduced by the length of the processed packet. The next packet process will start from rxbuf[0] after the read ends at new rxbuf[rx_len].
Signed-off-by: zhongzhijie1 <zhongzhijie1@xiaomi.com>
Driver now validates ACL provided buffer length agaist the size of
the data buffer which is defined by CONFIG_BLUETOOTH_UART_RXBUFSIZE.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
examples:
There are two threads involved: thread A with a priority of 100 and
thread B with a priority of 101. Here's how they interact:
When thread A releases a semaphore, thread B is scheduled to execute
some code and may reacquire the semaphore. If no other tasks are ready,
thread A will be scheduled to run.
This continuous process can lead to a busy loop.
Thread A: Thread B:
while (nxsem_get_value(&priv->wait, &semcount) >= 0 && <---
semcount <= 0) | 2)context switch
{ 1)contex switch |
nxsem_post(&priv->wait); -------------> run some code and nxsem_wait again
}
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This commit cleans up redundant header file includes throughout the codebase.
The changes include:
- Removing duplicate #include directives that were present in the same file
- Consolidating includes that were split across multiple lines unnecessarily
- Removing unused includes that were no longer needed
- Fixing some formatting issues with includes
The changes improve code organization and maintainability by:
- Reducing unnecessary dependencies
- Making include dependencies more explicit
- Following consistent include patterns
- Removing dead code
No functional changes are made - this is purely a code cleanup commit.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Modify the kernel to use only atomic_xx and atomic64_xx interfaces,
avoiding the use of sizeof or typeof to determine the type of
atomic operations, thereby simplifying the kernel's atomic
interface operations.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This patch fixed userspace headers conflict. Architecture-related definition and API should not be exposed to users.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
that pr requires chip turn on CONFIG_DRIVERS_BLUETOOTH to use bluetooth,
but not all defconig enable this option, so let's map bt_driver_register
to bt_netdev_register in header file in this case, and revert the unnessary
change in the related chip and board folders.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
rootcause: in btuart_rxwork, read data in blocking mode and btuart_read do three times, maybe remote send some packets one time,so it wont read the sencond packets.
Signed-off-by: wangzhi7 <wangzhi7@xiaomi.com>
add bt_driver_register interface, which could handle
these cases:bth4 bth5 btbridge btslip and btuart_lowerhalf_s etc.
Signed-off-by: chengkai <chengkai@xiaomi.com>
add btuart_create interface, which would be more
flexible in complex cases. And extract btuart_register interface.
Signed-off-by: chengkai <chengkai@xiaomi.com>
BLUETOOTH_MAX_FRAMELEN buffer size is only for LE only mode.
then we need to increase HCI buffer size in BR/EDR and LE mode.
Signed-off-by: chengkai <chengkai@xiaomi.com>
when downloading rtk firmware with vendor hci cmd sending to
bt bridge, which would not filter that hci cmd.
Signed-off-by: chengkai <chengkai@xiaomi.com>
bt bridge filter would not match when ACL in data
head with Packet_Boundary_Flag 0b10. in that case connect handle
is the first 3 octets of the packet, which not match
BT_HCI_EVT_LE_CONN_COMPLETE hci event alloc handle.
Signed-off-by: chengkai <chengkai@xiaomi.com>
Summary:
1. Add nuttx/atomic.h in include
2. Use nuttx/atomic.h instead of stdatomic.h in the nuttx directory
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
nuttx/driver/rpmsg: new folder, extract common rpmsg api in rptun.c to rpmsg.c.
rpmsg provide rpmsg_ops to each backend for specific implementation.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
