This forces the bch layer to read the sector from the physical device
instead of using the cached values. It is necessary to call when the
device is updated from the different source than bch, for example
erased by the MTD ioctl command.
It also has to invalidate readahead buffer from FTL if option
CONFIG_DRVR_READAHEAD is set.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The driver's main purpose is to support the porting of the open source
component optee_client (https://github.com/OP-TEE/optee_client) to nttux.
The basic function of the driver module is to convert the REE application layer data and send it to the TEE through rpmsg.
The main functions include
1 driver registration.
we need to register a device driver(/dev/tee0) through optee_register function.
2 open the driver
3 ioctl the driver
The ioctl command passes different parameters and commands, and interacts with the TEE through rpmsg.
4 close the driver
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The default mode for Rpmsgdev is to read/write data as long as possible for
caller, this mode does not apply to tun devices, tun devices can read and
write only one complete ip packet at a time.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Like rpmsgdev and rpmsgmtd, rpmsgblk allow the local cpu to
access the block device in the remote cpu.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
If the buffer to be flushed isn't multipled by the erase size,
let's pad the buffer proactively to avoid the allocation in ftl.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I6d7904aafab93a7886a594319d65826b81cd3cd1
3Change-Id: I88276149cc7826e7416929ca60b06314e96079a6
avoid the buffer flush as much as possible
Change-Id: I902f374e9540b36bd0b0c77a34cab5014a2c24fc
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: chao.an <anchao@xiaomi.com>
Squashed commit of the following:
drivers/: Run tools/nxstyle against all drivers/*.c.
boards/boardctl.c: Add new boardctl() command, BOARDIOC_MKRD, that can be used to create a RAM disk. This will replace the illegal call to ramdisk_register() currently used by NSH.
drivers/mkrd.c: Add wrapper around ramdisk_register() for creating a proper ramdisk.
Master
* Revert "Merged in yanqil-br/feature-multi_chan_pwm (pull request #973)"
This reverts commit aef0e0b538.
* arch/arm/src/{stm32/stm32f7/stm32h7/stm32l4}/stm32_pwm.c: configure multi-channel duty only if channel specified. This allows you to update duty cycle for a single channel
* nucleo-f303re/configs: add basic NSH configuration
* nucleo-f303re/configs/pwm: enable console on UART2 and set entry point to nsh_main
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Master
configs/nucleo-f334r8: add example for the SPWM generation (custom STM32 PWM usage)
arch/arm/src/stm32/stm32_pwm: fix compilation errors if the upper-half PWM logic is not enabled
include/nuttx/drivers/pwm.h: remove dependency on CONFIG_PWM for the upper-half PWM header. This allows compilation for the lower-level PWM drivers even if the upper-half PWM logic is not used.
arch/arm/src/stm32/stm32_tim.c: fix compilation error if there is no TIM8
configs/nucleo-f334r8/highpri: remove the upper-half ADC from configuration
configs/nucleo-f302r8/highpri: remove the upper-half ADC from configuration
configs/stm32f429i-disco/highpri: remove the upper-half ADC from configuration
Approved-by: GregoryN <gnutt@nuttx.org>
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Some cosmetic changes from coding style review.
Author: Juha Niskanen <juha.niskanen@haltian.com>
drivers/1wire: add 1-wire subsystem and ds28e17 driver
