walnux/sched/semaphore/sem_post.c

/****************************************************************************
 * sched/semaphore/sem_post.c
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <limits.h>
#include <errno.h>
#include <sched.h>

#include <nuttx/irq.h>
#include <nuttx/arch.h>

#include "sched/sched.h"
#include "semaphore/semaphore.h"

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nxsem_post_slow
 *
 * Description:
 *   When a kernel thread has finished with a semaphore, it will call
 *   nxsem_post().  This function unlocks the semaphore referenced by sem
 *   by performing the semaphore unlock operation on that semaphore.
 *
 *   If the semaphore value resulting from this operation is positive, then
 *   no tasks were blocked waiting for the semaphore to become unlocked; the
 *   semaphore is simply incremented.
 *
 *   If the value of the semaphore resulting from this operation is zero,
 *   then one of the tasks blocked waiting for the semaphore shall be
 *   allowed to return successfully from its call to nxsem_wait().
 *
 * Input Parameters:
 *   sem - Semaphore descriptor
 *
 * Returned Value:
 *   This is an internal OS interface and should not be used by applications.
 *   It follows the NuttX internal error return policy:  Zero (OK) is
 *   returned on success.  A negated errno value is returned on failure.
 *
 * Assumptions:
 *   This function may be called from an interrupt handler.
 *
 ****************************************************************************/

int nxsem_post_slow(FAR sem_t *sem)
{
  FAR struct tcb_s *stcb = NULL;
  irqstate_t flags;
#if defined(CONFIG_PRIORITY_INHERITANCE) || defined(CONFIG_PRIORITY_PROTECT)
  uint8_t proto;
#endif
  bool blocking = false;
  bool mutex = NXSEM_IS_MUTEX(sem);
  uint32_t mholder = NXSEM_NO_MHOLDER;

  /* The following operations must be performed with interrupts
   * disabled because sem_post() may be called from an interrupt
   * handler.
   */

  flags = enter_critical_section();

  if (mutex)
    {
      /* Mutex post from interrupt context is not allowed */

      DEBUGASSERT(!up_interrupt_context());

      /* Lock the mutex for us by setting the blocking bit */

      mholder = atomic_fetch_or(NXSEM_MHOLDER(sem), NXSEM_MBLOCKING_BIT);

      /* Mutex post from another thread is not allowed, unless
       * called from nxsem_reset
       */

      DEBUGASSERT(mholder == (NXSEM_MBLOCKING_BIT | NXSEM_MRESET) ||
                  (mholder & (~NXSEM_MBLOCKING_BIT)) == nxsched_gettid());

      blocking = NXSEM_MBLOCKING(mholder);

      if (!blocking)
        {
          if (mholder != NXSEM_MRESET)
            {
              mholder = NXSEM_NO_MHOLDER;
            }

          atomic_set(NXSEM_MHOLDER(sem), mholder);
        }
    }
  else
    {
      int32_t sem_count;

      /* Check the maximum allowable value */

      sem_count = atomic_read(NXSEM_COUNT(sem));
      do
        {
          if (sem_count >= SEM_VALUE_MAX)
            {
              leave_critical_section(flags);
              return -EOVERFLOW;
            }
        }
      while (!atomic_try_cmpxchg_release(NXSEM_COUNT(sem), &sem_count,
                                         sem_count + 1));
      blocking = sem_count < 0;
    }

  /* Perform the semaphore unlock operation, releasing this task as a
   * holder then also incrementing the count on the semaphore.
   *
   * NOTE:  When semaphores are used for signaling purposes, the holder
   * of the semaphore may not be this thread!  In this case,
   * nxsem_release_holder() will do nothing.
   *
   * In the case of a mutex this could be simply resolved since there is
   * only one holder but for the case of counting semaphores, there may
   * be many holders and if the holder is not this thread, then it is
   * not possible to know which thread/holder should be released.
   *
   * For this reason, it is recommended that priority inheritance be
   * disabled via nxsem_set_protocol(SEM_PRIO_NONE) when the semaphore is
   * initialized if the semaphore is to used for signaling purposes.
   */

  if (!mutex || blocking)
    {
      nxsem_release_holder(sem);
    }

#if defined(CONFIG_PRIORITY_INHERITANCE) || defined(CONFIG_PRIORITY_PROTECT)
  /* Don't let any unblocked tasks run until we complete any priority
   * restoration steps.  Interrupts are disabled, but we do not want
   * the head of the ready-to-run list to be modified yet.
   *
   * NOTE: If this sched_lock is called from an interrupt handler, it
   * will do nothing.
   */

  proto = sem->flags & SEM_PRIO_MASK;
  if (proto != SEM_PRIO_NONE)
    {
      sched_lock();
    }
#endif

  /* If the result of semaphore unlock is non-positive, then
   * there must be some task waiting for the semaphore.
   */

  if (blocking)
    {
      /* Check if there are any tasks in the waiting for semaphore
       * task list that are waiting for this semaphore.  This is a
       * prioritized list so the first one we encounter is the one
       * that we want.
       */

      stcb = (FAR struct tcb_s *)dq_remfirst(SEM_WAITLIST(sem));
      if (stcb != NULL)
        {
          FAR struct tcb_s *rtcb = this_task();

          /* The task will be the new holder of the semaphore when
           * it is awakened.
           */

          if (mutex)
            {
              uint32_t blocking_bit = dq_empty(SEM_WAITLIST(sem)) ?
                0 : NXSEM_MBLOCKING_BIT;
              atomic_set(NXSEM_MHOLDER(sem),
                         ((uint32_t)stcb->pid) | blocking_bit);
            }
          else
            {
              nxsem_add_holder_tcb(stcb, sem);
            }

          /* Stop the watchdog timer */

          wd_cancel(&stcb->waitdog);

          /* Indicate that the wait is over. */

          stcb->waitobj = NULL;

          /* Add the task to ready-to-run task list and
           * perform the context switch if one is needed
           */

          if (nxsched_add_readytorun(stcb))
            {
              up_switch_context(this_task(), rtcb);
            }
        }
    }

  /* Check if we need to drop the priority of any threads holding
   * this semaphore.  The priority could have been boosted while they
   * held the semaphore.
   */

#if defined(CONFIG_PRIORITY_INHERITANCE) || defined(CONFIG_PRIORITY_PROTECT)
  if (proto != SEM_PRIO_NONE)
    {
      if (proto == SEM_PRIO_INHERIT)
        {
#ifdef CONFIG_PRIORITY_INHERITANCE
          nxsem_restore_baseprio(stcb, sem);
#endif
        }
      else if (proto == SEM_PRIO_PROTECT)
        {
          nxsem_protect_post(sem);
        }

      sched_unlock();
    }
#endif

  /* Interrupts may now be enabled. */

  leave_critical_section(flags);

  return OK;
}