walnux/include/nuttx/lcd/pcd8544.h
Petro Karashchenko 8d3bf05fd2 include: fix double include pre-processor guards
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-16 11:11:14 -03:00

110 lines
3.9 KiB
C

/****************************************************************************
* include/nuttx/lcd/pcd8544.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_LCD_PCD8544_H
#define __INCLUDE_NUTTX_LCD_PCD8544_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <stdbool.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* PCD8544 Configuration Settings:
*
* CONFIG_PCD8544_SPIMODE - Controls the SPI mode
* CONFIG_PCD8544_FREQUENCY - Define to use a different bus frequency
* CONFIG_PCD8544_NINTERFACES - Specifies the number of physical
* PCD8544 devices that will be supported. NOTE: At present, this
* must be undefined or defined to be 1.
*
* Required LCD driver settings:
* CONFIG_LCD_PCD8544 - Enable PCD8544 support
* CONFIG_LCD_MAXCONTRAST should be 255, but any value >0 and <=255 will be
* accepted.
* CONFIG_LCD_MAXPOWER should be 2: 0=off, 1=dim, 2=normal
*
* Required SPI driver settings:
* CONFIG_SPI_CMDDATA - Include support for cmd/data selection.
*/
/* Some important "colors" */
#define PCD8544_Y1_BLACK 0
#define PCD8544_Y1_WHITE 1
/* Only two power settings are supported: */
#define PCD8544_POWER_OFF 0
#define PCD8544_POWER_ON 1
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: pcd8544_initialize
*
* Description:
* Initialize the PCD8544 video hardware. The initial state of the
* LCD is fully initialized, display memory cleared, and the LCD ready
* to use, but with the power setting at 0 (full off == sleep mode).
*
* Input Parameters:
*
* spi - A reference to the SPI driver instance.
* devno - A value in the range of 0 thropcd8544h
* CONFIG_PCD8544_NINTERFACES-1.
* This allows support for multiple LCD devices.
*
* Returned Value:
*
* On success, this function returns a reference to the LCD object for
* the specified LCD. NULL is returned on any failure.
*
****************************************************************************/
struct lcd_dev_s; /* see nuttx/lcd.h */
struct spi_dev_s; /* see nuttx/spi/spi.h */
FAR struct lcd_dev_s *pcd8544_initialize(FAR struct spi_dev_s *spi,
unsigned int devno);
#ifdef __cplusplus
}
#endif
#endif /* __INCLUDE_NUTTX_LCD_PCD8544_H */