| .. |
|
1wire
|
ds28e17.h edited online with Bitbucket
|
2018-04-05 12:08:56 +00:00 |
|
analog
|
drivers/analog: Add driver for digital to analog converted DAC7571.
|
2018-08-02 06:40:48 -06:00 |
|
audio
|
Adds loopback test for digital MIC on lc823450 via i2schar driver.
|
2018-06-05 10:34:22 -06:00 |
|
binfmt
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
can
|
arch/arm/src/samv7: Add ability for CAN BUS_OFF autorecovery according ISO11898-1:2015. With this change we added an ioctl for triggering the autorecovery sequence for BUS_OFF to the CAN-driver and the SAMV7 low-level driver. According the datasheet: If the device goes Bus_Off, it will set MCAN_CCCR.INIT of its own accord, stopping all bus activities. Once MCAN_CCCR.INIT has been cleared by the processor (application), the device will then wait for 129 occurrences of Bus Idle (129 * 11 consecutive recessive bits) before resuming normal operation. At the end of the Bus_Off recovery sequence, the Error Management Counters will be reset. During the waiting time after the resetting of MCAN_CCCR.INIT, each time a sequence of 11 recessive bits has been monitored, a Bit0 Error code is written to MCAN_PSR.LEC, enabling the processor to readily check up whether the CAN bus is stuck at dominant or continuously disturbed and to monitor the Bus_Off recovery sequence. MCAN_ECR.REC is used to count these sequences.
|
2018-07-04 07:48:59 -06:00 |
|
contactless
|
Add an instance argument to the SPIDEV definitions.
|
2017-04-29 12:26:52 -06:00 |
|
crypto
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
drivers
|
This commit adds a 1wire subsystem.
|
2018-04-04 10:57:36 -06:00 |
|
eeprom
|
drivers/eeprobom: EEPROM driver for AT24xx compatible EEPROMs.
|
2018-02-14 07:53:01 -06:00 |
|
fs
|
include/nuttx/fs/hostfs.h: Update duplicated definitions in HOSTFS that must match NuttX values.
|
2018-07-09 05:44:48 -06:00 |
|
i2c
|
Update some comments
|
2018-08-03 09:30:31 -06:00 |
|
input
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
ioexpander
|
configs/stm32f103-minimum: Remove nonsensical #error.
|
2018-01-09 11:17:01 -06:00 |
|
lcd
|
drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories.
|
2018-05-19 16:46:21 -06:00 |
|
leds
|
Squashed commit of the following:
|
2018-07-22 15:13:39 -06:00 |
|
lib
|
libm: Port gamma() and lgamma() from FreeBSD to NuttX.
|
2017-08-08 07:02:39 -06:00 |
|
mm
|
net/tcp: Re-think CONFIG_NET_TCP_RWND_CONTROL TCP windowing controls.
|
2018-06-24 14:46:12 -06:00 |
|
modem
|
include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique
|
2016-09-16 09:39:51 -06:00 |
|
mtd
|
/include/nuttx/mtd/configdata.h: Fix copy-paste comment in configdata.h
|
2018-05-08 09:09:47 -06:00 |
|
net
|
Small update to some comments.
|
2018-07-19 09:09:53 -06:00 |
|
nx
|
Make sure that labeling is used consistently in all function headers (part 3).
|
2018-02-01 12:17:03 -06:00 |
|
power
|
Merged in raiden00/nuttx (pull request #668)
|
2018-07-07 17:04:57 +00:00 |
|
sensors
|
include/nuttx/sensors/bh1750fvi.h: Eliminate a warning.
|
2018-07-15 07:20:07 -06:00 |
|
serial
|
Squashed commit of the following:
|
2017-07-28 12:01:05 -06:00 |
|
spi
|
include/nuttx/spi/spi.h: Add a definition for a USBHOST SPI device. drivers/usbhost/usbhost_max3421e.c: Review and correct SPI locking usage.
|
2018-07-04 08:55:43 -06:00 |
|
syslog
|
syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic.
|
2018-06-07 16:29:16 -06:00 |
|
timers
|
Update some comments.
|
2018-07-22 05:56:11 -06:00 |
|
usb
|
arch/arm/include/armv7-m, arch/arm/include/armv7-m, arch/arm/include/stm32f7: Add a configuration to enable workaround for r0p1 Errata 837070: Increasing priority usingwrite to BASEPRI does not take effect immediately.
|
2018-08-02 16:51:58 -06:00 |
|
video
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
wireless
|
include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies.
|
2018-04-29 12:43:09 -06:00 |
|
.gitignore
|
|
|
|
addrenv.h
|
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
|
2014-09-24 07:29:09 -06:00 |
|
arch.h
|
sched/sched: Implements a global scheduler lock capability as part of SMP support. This allows the scheduler to be locked with no knowledge or access to the TCB of the currently running task. This is necessary because accessing the TCB of the currenlty running task is, itself, a non-atomic operation. This global scheduler lock cpability was add just to support that atomic access to the TCB.
|
2018-02-05 13:12:36 -06:00 |
|
ascii.h
|
ASCII: Improve some naming
|
2016-04-14 16:20:36 -06:00 |
|
board.h
|
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
|
2018-01-17 09:33:28 -06:00 |
|
cancelpt.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
clock.h
|
Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
|
2018-06-16 12:16:13 -06:00 |
|
compiler.h
|
compiler.h: Fix some GCC warnings introduced for SDCC support. Basically a naming collision.
|
2017-10-02 07:09:31 -06:00 |
|
init.h
|
enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized
|
2016-05-18 09:17:01 -06:00 |
|
irq.h
|
spin_lock_irqsave() and spin_unlock_irqrestore() are only valid if the CPU supports global disabling of interrupts.
|
2018-02-04 15:41:22 -06:00 |
|
kmalloc.h
|
profcs: At file to should user space heap. This replaces the NSH free command.
|
2017-11-13 12:51:33 -06:00 |
|
kthread.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
mmcsd.h
|
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
|
2017-01-31 09:16:01 -06:00 |
|
module.h
|
Module names are not needed in libc/modlib when the module library is used only for shared library support.
|
2017-01-29 12:23:24 -06:00 |
|
mqueue.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
page.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pgalloc.h
|
mm/mm_gran: Add a function to get information about the state of the granuale allocator.
|
2017-11-14 14:41:03 -06:00 |
|
poff.h
|
Fix names of pre-processor variables used in header file idempotence
|
2016-08-06 19:21:42 -06:00 |
|
progmem.h
|
progmem interface: Discern r/w and erase page sizes. Introduce new up_progmem_erasesize architecture API to be able to communicate the read/write page size independently from erase page size. Implement up_progmem_erasesize for all architectures that already support progmem, assuming that for those architectures the sizes of both read/write and erase pages are identical.
|
2018-05-01 06:23:52 -06:00 |
|
pthread.h
|
Move cancellation point definitions to their own header file.
|
2016-12-10 09:08:26 -06:00 |
|
random.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
sched.h
|
Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
|
2018-06-16 12:16:13 -06:00 |
|
sched_note.h
|
Update ChangeLog in prep for 7.20 release.
|
2017-03-08 10:09:48 -06:00 |
|
scsi.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
|
sdio.h
|
arch/arm/src/lkpc54xx: In SDMMC driver, fix an error which was clobbering the interrupt mask register (xfrmask). Also, add a kludge for the missing DTO interrupt.
|
2017-12-20 18:39:10 -06:00 |
|
semaphore.h
|
Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
|
2018-06-16 12:16:13 -06:00 |
|
signal.h
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
spawn.h
|
|
|
|
spinlock.h
|
armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions.
|
2018-02-04 12:22:03 -06:00 |
|
streams.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
symtab.h
|
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
|
2015-12-13 08:10:01 -06:00 |
|
time.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
tls.h
|
TLS: Simplify
|
2016-03-11 07:17:32 -06:00 |
|
tree.h
|
include/: Remove dangling space at the end of lines.
|
2017-06-28 13:30:08 -06:00 |
|
userspace.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
vt100.h
|
Add ANSI/VT100 color codes
|
2014-11-10 15:10:57 -06:00 |
|
wdog.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
wqueue.h
|
Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
|
2018-06-16 12:16:13 -06:00 |
|
zoneinfo.h
|
include/: Remove dangling space at the end of lines.
|
2017-06-28 13:30:08 -06:00 |
