34d2cde8a8
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
which will benefit l3(IP) layer for multi-MAC(l2) implementation,
especially in some NICs such as celluler net driver.
new configuration options: CONFIG_NET_LL_GUARDSIZE
CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding
------------------------------------------------------------
Layout of frist iob entry:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
iob | Reserved | io_len |
-------------------------------------------------
-------------------------------------------------------------
Layout of different NICs implementation:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
Ethernet | Reserved | ETH_HDRLEN | io_len |
---------------------------------|---------------
8021Q | Reserved | ETH_8021Q_HDRLEN | io_len |
---------------------------------|---------------
ipforward | Reserved | io_len |
-------------------------------------------------
--------------------------------------------------------------------
2. Support iob offload to l2 driver to avoid unnecessary memory copy
Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.
new interface to support iob offload:
------------------------------------------
| IOB version | original |
|----------------------------------------|
| devif_iob_poll() | devif_poll() |
| ... | ... |
------------------------------------------
--------------------------------------------------------------------
1> NIC hardware support Scatter/gather transfer
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
dev->d_iob: |
--------------- ---------------
io_data iob1 | | | iob3 | | |
\ --------------- ---------------
--------------- | --------------- |
iob0 | | | | iob2 | | | |
--------------- | --------------- |
\ | / /
\ | / /
----------------------------------------------
NICs io vector | | | | | | | | | |
----------------------------------------------
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to each iobs)
--------------------------------------------------------------------
2> CONFIG_IOB_BUFSIZE is greater than MTU:
TX:
"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
"NIC"_send()
(dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to io_data)
--------------------------------------------------------------------
3> Compatible with all old flat buffer NICs
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll(devif_poll_callback()) devif_poll_callback() /* new interface, gather iobs to flat buffer */
/ \
/ \
devif_poll("NIC"_txpoll) "NIC"_send()(dev->d_buf)
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
netdev_input() /* new interface, Scatter/gather flat/iob buffer */
|
|
pkt/ipv[4|6]_input()/...
|
|
NICs io vector receive(Orignal flat buffer)
3. Iperf passthrough on NuttX simulator:
-------------------------------------------------
| Protocol | Server | Client | |
|-----------------------------------------------|
| TCP | 813 | 834 | Mbits/sec |
| TCP(Offload) | 1720 | 1100 | Mbits/sec |
| UDP | 22 | 757 | Mbits/sec |
| UDP(Offload) | 25 | 1250 | Mbits/sec |
-------------------------------------------------
Signed-off-by: chao an <anchao@xiaomi.com>
121 lines
3.8 KiB
C
121 lines
3.8 KiB
C
/****************************************************************************
|
|
* net/icmpv6/icmpv6_rsolicit.c
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <debug.h>
|
|
|
|
#include <nuttx/net/netdev.h>
|
|
#include <nuttx/net/netstats.h>
|
|
|
|
#include "devif/devif.h"
|
|
#include "netdev/netdev.h"
|
|
#include "inet/inet.h"
|
|
#include "utils/utils.h"
|
|
#include "icmpv6/icmpv6.h"
|
|
|
|
#ifdef CONFIG_NET_ICMPv6_AUTOCONF
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: icmpv6_rsolicit
|
|
*
|
|
* Description:
|
|
* Set up to send an ICMPv6 Router Solicitation message. This version
|
|
* is for a standalone solicitation. If formats:
|
|
*
|
|
* - The IPv6 header
|
|
* - The ICMPv6 Router Solicitation Message
|
|
*
|
|
* The device IP address should have been set to the link local address
|
|
* prior to calling this function.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Reference to a device driver structure
|
|
*
|
|
* Returned Value:
|
|
* None
|
|
*
|
|
****************************************************************************/
|
|
|
|
void icmpv6_rsolicit(FAR struct net_driver_s *dev)
|
|
{
|
|
FAR struct icmpv6_router_solicit_s *sol;
|
|
uint16_t lladdrsize;
|
|
uint16_t l3size;
|
|
|
|
/* Length excludes the IPv6 header */
|
|
|
|
lladdrsize = netdev_lladdrsize(dev);
|
|
l3size = SIZEOF_ICMPV6_ROUTER_SOLICIT_S(lladdrsize);
|
|
|
|
ipv6_build_header(IPv6BUF, l3size, IP_PROTO_ICMP6,
|
|
dev->d_ipv6addr, g_ipv6_allrouters, 255);
|
|
|
|
/* Set up the ICMPv6 Router Solicitation message */
|
|
|
|
sol = IPBUF(IPv6_HDRLEN);
|
|
sol->type = ICMPV6_ROUTER_SOLICIT; /* Message type */
|
|
sol->code = 0; /* Message qualifier */
|
|
sol->flags[0] = 0; /* flags */
|
|
sol->flags[1] = 0;
|
|
sol->flags[2] = 0;
|
|
sol->flags[3] = 0;
|
|
|
|
/* Set up the options */
|
|
|
|
sol->opttype = ICMPv6_OPT_SRCLLADDR; /* Option type */
|
|
sol->optlen = ICMPv6_OPT_OCTECTS(lladdrsize); /* Option length in octets */
|
|
|
|
/* Copy our link layer address into the message */
|
|
|
|
memcpy(sol->srclladdr, &dev->d_mac, lladdrsize);
|
|
|
|
/* Update device buffer length */
|
|
|
|
iob_update_pktlen(dev->d_iob, IPv6_HDRLEN + l3size);
|
|
|
|
/* Calculate the checksum over both the ICMP header and payload */
|
|
|
|
sol->chksum = 0;
|
|
sol->chksum = ~icmpv6_chksum(dev, IPv6_HDRLEN);
|
|
|
|
/* Set the size to the size of the IPv6 header and the payload size */
|
|
|
|
dev->d_len = IPv6_HDRLEN + l3size;
|
|
|
|
ninfo("Outgoing ICMPv6 Router Solicitation length: %d\n", dev->d_len);
|
|
|
|
#ifdef CONFIG_NET_STATISTICS
|
|
g_netstats.icmpv6.sent++;
|
|
g_netstats.ipv6.sent++;
|
|
#endif
|
|
}
|
|
|
|
#endif /* CONFIG_NET_ICMPv6_AUTOCONF */
|