luchianmihai/walnux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
walnux/drivers/serial
History
Dave Marples 5179fa9a64 drivers/serial/serial.c: Limit the number of times that the poll semaphore is incrmented.
2019-06-13 16:23:04 -06:00
..
Kconfig arch/arm/src/common/up_lwl_console.c: Add support for a 'Lightweight Link' protocol between a target and debugger for use when you need a console but the target doesn't have a spare serial port or other available resource. 2019-06-03 07:31:17 -06:00
Kconfig-16550 Squashed commit of the following: 2018-08-26 11:37:16 -06:00
Kconfig-lpuart This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member. 2019-05-30 13:45:36 -06:00
Kconfig-sci drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4. 2018-03-14 10:33:27 -06:00
Kconfig-uart drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4. 2018-03-14 10:33:27 -06:00
Kconfig-usart drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4. 2018-03-14 10:33:27 -06:00
lowconsole.c Squashed commit of the following: 2019-05-21 18:57:54 -06:00
Make.defs drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams. 2019-04-24 12:11:40 -06:00
ptmx.c Squashed commit of the following: 2019-05-21 18:57:54 -06:00
pty.c Squashed commit of the following: 2019-05-21 18:57:54 -06:00
pty.h PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt() 2016-07-15 09:39:33 -06:00
serial.c drivers/serial/serial.c: Limit the number of times that the poll semaphore is incrmented. 2019-06-13 16:23:04 -06:00
serial_dma.c drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams. 2019-04-24 12:11:40 -06:00
serial_io.c drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT. 2018-09-02 15:36:25 -06:00
tcdrain.c Make sure that labeling is used consistently in all function headers (part 2). 2018-02-01 12:03:55 -06:00
uart_16550.c drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams. 2019-04-24 12:11:40 -06:00