luchianmihai/walnux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
walnux/include/nuttx
History
Gregory Nutt 3ce3b168f8 stm32: Add interface description for ltdc controller. This defines the interface to perform hardware accelerated layer operation by the ltdc controller. 
The following methods must be supported by the implementation:

- gevideoinfo
- getplaneinfo
- getlid
- setclut
- getclut
- setcolor
- getcolor
- setcolorkey
- getcolorkey
- setalpha
- getalpha
- setblendmode
- getblendmode
- setarea
- getarea
- update

And if DMA2D is supported:

- blit
- blend

The method up_ltdcgetlayer provides access to a reference of a specific ltdc
layer.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:45:18 -06:00
..
analog More trailing whilespace removal 2014-04-13 14:32:20 -06:00
audio Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
binfmt Oops.. part of the last change will still in the editor 2014-11-12 18:33:07 -06:00
crypto Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
eeprom Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
fs SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
input Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
lcd Add driver for ST7565 that works with NHD‐C12864KGZ display. From Pierre-noel Bouteville. 2014-11-13 16:03:52 -06:00
mm MM: Minimum memory allocation must to up to 32 if sizeof pointer is 8-bytes 2014-11-02 12:11:20 -06:00
mtd SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
net Move IP header flags from tcp.h to ip.h and rename IP_FLAGS vs TCPFLAGS. The problem fixed here is that there IP flags were not available when TCP was disabled. The IP flags are used in ICMP and IGFMP 2014-11-17 17:16:46 -06:00
nx Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville 2014-12-10 17:11:23 -06:00
power LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
sensors Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
sercomm Move include/sercomm to include/nuttx/sercomm 2012-03-24 18:33:21 +00:00
serial Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
spi Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
syslog ARMv7: Add support to use ITM for SYSLOG debug output 2014-10-22 09:03:00 -06:00
usb Move include/nuttx/gran.h to include/nuttx/mm/gran.h 2014-09-24 06:55:26 -06:00
video stm32: Add interface description for ltdc controller. This defines the interface to perform hardware accelerated layer operation by the ltdc controller. 2014-12-19 13:45:18 -06:00
wireless Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
.gitignore Mostly updates and corrections to .gitignore files 2013-04-04 15:39:50 -06:00
addrenv.h Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
arch.h Fixes to tickless operation code. From Brandon Warhurst 2014-10-23 06:41:31 -06:00
ascii.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
can.h More trailing whilespace removal 2014-04-13 14:32:20 -06:00
clock.h last change alters semantics of __HAVE_KERNEL_GLOBALS 2014-08-30 14:44:48 -06:00
compiler.h Defines inline functions as not instrumented - this is relevant for anyone using instrumentation. From Lorenz Meier. 2014-11-12 07:32:36 -06:00
configdata.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
float.h lib/math files not follow coding standard; float, double, and long double versions in separate files to reduce size of dumb link 2012-10-28 18:42:09 +00:00
i2c.h maXTouch: Check for successful memory allocation was backward 2014-07-07 09:55:39 -06:00
init.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
irq.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
kmalloc.h Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
kthread.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
lib.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
math.h Change double_t to double in rint. Add rintf and rintl while we are at it 2014-06-28 10:14:29 -06:00
mmcsd.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
mqueue.h Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes 2014-09-30 08:03:39 -06:00
page.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
pgalloc.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
poff.h Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
progmem.h STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin 2014-08-28 09:11:20 -06:00
pthread.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
pwm.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
regex.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
rtc.h More trailing whilespace removal 2014-04-13 14:32:20 -06:00
rwbuffer.h Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL 2014-07-11 16:19:17 -06:00
sched.h strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8. 2014-12-17 12:24:02 -06:00
scsi.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
sdio.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
semaphore.h Complete re-implementation of mq_close 2014-09-29 15:33:34 -06:00
spawn.h Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h 2013-01-18 01:52:42 +00:00
stdarg.h Add a generic GCC stdarg.h header file 2012-07-08 14:50:43 +00:00
streams.h Implement setlogmask(); move some syslog logic from libc/syslog to fs/syslog 2014-10-08 19:08:26 -06:00
time.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
timer.h Timer driver updates from Bob Doiron 2014-05-05 14:40:19 -06:00
tree.h Fix error in tree.h 2014-06-02 13:44:44 -06:00
userspace.h Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK 2014-10-11 15:59:40 -06:00
vt100.h Add ANSI/VT100 color codes 2014-11-10 15:10:57 -06:00
watchdog.h SAMA5 T/C: Can now handle non-constant BOARD_MCK_FREQUENCY. Also now supports methods to attach user interrupt handlers 2014-08-09 10:30:45 -06:00
wdog.h Add support for statically allocated watchdog timer structures 2014-08-22 08:46:34 -06:00
wqueue.h Add description of work queues to the porting guide. Update comments 2014-10-14 10:21:18 -06:00