Gregory Nutt c5953bd0e9 Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf ... and this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf) shows that ACMD23 must be preceeded with CMD55 command as any other ACMD commands. Also, after the block reading wait loop must be inserted before writing the next block of data to the sd card From Dmitry Nikolaev via Jussi Kivilinna		2015-03-13 07:26:16 -06:00
..
Kconfig	drivers/mmcsd/Kconfig: ARCH_HAVE_SDIOWAIT_WRCOMPLETE should not depend on MMCSD_SDIO	2015-01-09 07:21:43 -06:00
Make.defs	A few native window build updates	2012-11-25 20:58:39 +00:00
mmcsd_csd.h	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
mmcsd_debug.c	Update everything under nuttx/drivers to use the corrected syslog interfaces	2014-10-08 10:18:58 -06:00
mmcsd_internal.h	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
mmcsd_sdio.c	MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.	2015-01-08 06:23:42 -06:00
mmcsd_sdio.h	SDIO-based MMC/SD improvements from Bob Doiron	2014-04-21 17:15:42 -06:00
mmcsd_spi.c	Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf	2015-03-13 07:26:16 -06:00
mmcsd_spi.h	Email address change in nuttx/	2012-09-13 18:32:24 +00:00