Merged in juniskane/nuttx_stm32l4/stm32l4_adc_kconfig_pr (pull request #478 )
2017-09-06 22:05:44 +00:00
drivers/audio: Fix naming of configurations to be compliant for vs1053 audio driver.
2017-08-24 11:11:06 -06:00
Documentation and comments updated to further enshrine exec() as an official NuttX interface.
2017-10-03 07:52:05 -06:00
MCP1515: Eliminate some warnings
2017-06-14 09:38:58 -06:00
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Add entropy pool and strong random number generator
2017-03-30 07:38:37 -06:00
Move SMPS driver to drivers/power (and header to include/nuttx/power). Rename debug to IOCTLs to more general power naming; create a separate file to coordinate power-related IOCTL commands.
2017-07-23 07:35:09 -06:00
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
2014-12-05 09:13:34 -06:00
Misc fixes for compilation with current SDCC compiler
2017-09-30 14:55:39 -06:00
Changes from review of PR 114
2016-08-14 13:38:47 -06:00
include/nuttx/input: Remove bogus, obsolete keypad.h header file.
2017-07-04 15:58:39 -06:00
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
drivers/lcd: ssd1306: add support for board power control. ThingseeOne has regulator for controlling display power on/off. Patch adds support for board based power control to SSD1306 driver.
2017-08-22 08:40:27 -06:00
Add driver for APA102 LED controller. These LEDs are used on LED Strips and are controlled over SPI.
2017-09-18 16:48:55 -06:00
libm: Port gamma() and lgamma() from FreeBSD to NuttX.
2017-08-08 07:02:39 -06:00
PF_IEEE802154: Finishes up sendto() logic
2017-08-19 12:32:56 -06:00
include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique
2016-09-16 09:39:51 -06:00
MTD: Add driver for Macronix QuadSPI flash memory
2017-08-06 10:51:17 -06:00
Squashed commit of the following:
2017-09-30 10:41:21 -06:00
Squashed commit of the following:
2017-10-03 15:35:24 -06:00
Merged in raiden00/nuttx (pull request #480 )
2017-09-10 17:43:20 +00:00
Merged in juniskane/nuttx_stm32l4/stm32l4_adc_kconfig_pr (pull request #478 )
2017-09-06 22:05:44 +00:00
Squashed commit of the following:
2017-07-28 12:01:05 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
Extend the RTC framework with an alarm read ioctl (RTC_RD_ALARM). Through it consumer could get configuration settings about previously scheduled hardware alarms (active status, hours, minutes, seconds).
2017-09-03 08:39:02 -06:00
drivers/usbdev: Add RNDIS-over-USB driver
2017-09-24 07:24:34 -06:00
Fix some typos in comments; Fix some bad spacing in fb.h
2017-09-18 09:03:26 -06:00
Merged in merlin17/nuttx/xbee (pull request #484 )
2017-09-15 14:37:55 +00:00
Mostly updates and corrections to .gitignore files
2013-04-04 15:39:50 -06:00
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
2014-09-24 07:29:09 -06:00
Move prototype from nuttx/include/nuttx/arch.h to apps/include/platform/cxxinitialize.h
2017-05-13 16:53:55 -06:00
ASCII: Improve some naming
2016-04-14 16:20:36 -06:00
Squashed commit of the following:
2017-07-16 08:43:17 -06:00
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
compiler.h: Fix some GCC warnings introduced for SDCC support. Basically a naming collision.
2017-10-02 07:09:31 -06:00
enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized
2016-05-18 09:17:01 -06:00
Add missing endif
2017-03-03 14:39:35 -06:00
Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking
2016-02-16 19:33:22 -06:00
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Module names are not needed in libc/modlib when the module library is used only for shared library support.
2017-01-29 12:23:24 -06:00
Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov.
2016-04-11 11:14:18 -06:00
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
2014-09-28 10:15:33 -06:00
Fix names of pre-processor variables used in header file idempotence
2016-08-06 19:21:42 -06:00
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Move cancellation point definitions to their own header file.
2016-12-10 09:08:26 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
Syslog buffering: Use IOBs to buffer data, not an on-stack buffer
2017-05-10 17:36:08 -06:00
Update ChangeLog in prep for 7.20 release.
2017-03-08 10:09:48 -06:00
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
sdio.h:Fix typos
2017-08-17 09:33:34 -10:00
sched/semaphore: sem_trywait() modifies the errno value and, hence, should not be used within the OS. Use nxsem_trywait() instead.
2017-10-05 07:59:06 -06:00
Squashed commit of the following:
2017-10-07 08:22:18 -06:00
Add internal API task_reparent(), used in posix_spawn(). Move libc/spawn/lib_ps.c to sched/task_posixspawn.c; Move libc/spawn/spawn.h to include/nuttx/spawn.h
2013-01-18 01:52:42 +00:00
SMP: There were certain conditions that we must avoid by preventing releasing the pending tasks while withn a critical section. But this logic was incomplete; there was no logic to prevent other CPUs from adding new, running tasks while on CPU is in a critical section.
2016-12-27 08:49:07 -06:00
Syslog buffering: Use IOBs to buffer data, not an on-stack buffer
2017-05-10 17:36:08 -06:00
Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier
2015-12-13 08:10:01 -06:00
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
TLS: Simplify
2016-03-11 07:17:32 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
2015-07-10 08:37:02 -06:00
Add ANSI/VT100 color codes
2014-11-10 15:10:57 -06:00
Update some wdog-related comments
2017-02-24 10:58:37 -06:00
work_queue() must cancel existing work prior to queuing new work, otherwise the work queue can become corrupted. Problem noted by Pascal Speck.
2017-08-28 07:46:48 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
9e25d89223