ds28e17.h edited online with Bitbucket
2018-04-05 12:08:56 +00:00
drivers/analog: Add driver for digital to analog converted DAC7571.
2018-08-02 06:40:48 -06:00
Fixes warnings from header files:
2018-11-09 09:10:28 -06:00
binfmt/ and libs/libc: Make exepath_*() more common:
2018-11-08 07:27:14 -06:00
arch/arm/src/samv7: Add ability for CAN BUS_OFF autorecovery according ISO11898-1:2015. With this change we added an ioctl for triggering the autorecovery sequence for BUS_OFF to the CAN-driver and the SAMV7 low-level driver. According the datasheet: If the device goes Bus_Off, it will set MCAN_CCCR.INIT of its own accord, stopping all bus activities. Once MCAN_CCCR.INIT has been cleared by the processor (application), the device will then wait for 129 occurrences of Bus Idle (129 * 11 consecutive recessive bits) before resuming normal operation. At the end of the Bus_Off recovery sequence, the Error Management Counters will be reset. During the waiting time after the resetting of MCAN_CCCR.INIT, each time a sequence of 11 recessive bits has been monitored, a Bit0 Error code is written to MCAN_PSR.LEC, enabling the processor to readily check up whether the CAN bus is stuck at dominant or continuously disturbed and to monitor the Bus_Off recovery sequence. MCAN_ECR.REC is used to count these sequences.
2018-07-04 07:48:59 -06:00
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
drivers/mtd/ftl.c: Support BIOC_FLUSH ioctl
2018-11-09 08:12:52 -06:00
drivers/eeprobom: EEPROM driver for AT24xx compatible EEPROMs.
2018-02-14 07:53:01 -06:00
include/nuttx/fs/fs.h: register_mtddriver should depend on CONFIG_MTD not CONFIG_MTD_PARTITION
2018-11-09 09:29:41 -06:00
include/nuttx/i2c/i2c_master.h: Add the standard speed macros.
2018-08-27 06:02:13 -06:00
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
drivers/ioexpander: Support multiple registrations of GPIO signal events.
2018-11-08 08:29:22 -06:00
Remove trailing spaces at the end of lines.
2018-08-13 07:39:38 -06:00
Squashed commit of the following:
2018-07-22 15:13:39 -06:00
binfmt/ and libs/libc: Make exepath_*() more common:
2018-11-08 07:27:14 -06:00
net/tcp/tcp_recvwindow.c: In order to receive data we must not only have IOBs available, but we must also have at least one IOB chain qentry available. Otherwise, we will advertise that we an buffer a lot of data when, in fact, we cannot. This is an expermental fix to a performance problem noted by Masayuki Ishikawa.
2018-09-22 09:33:29 -06:00
drivers/mtd/ftl.c: Change ftl_initialize_by_name to ftl_initialize_by_path
2018-11-09 08:15:57 -06:00
libs/libc/netdb/lib_dnsquery.c: harden against DNS spoofing. This commit implements most of the RFC 5452 guidelines for making DNS more resilient. We now verify response matches against what was queried and use unpredictable query IDs. It is also checked that response come from correct DNS server. Also fixes a buffer overflow when querying hostnames longer than CONFIG_NETDB_DNSCLIENT_NAMESIZE.
2018-11-16 06:56:45 -06:00
Make sure that labeling is used consistently in all function headers (part 3).
2018-02-01 12:17:03 -06:00
arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.
2018-09-21 06:44:23 -06:00
drivers/sensors/mlx90614.c: Add support for the Infrared Thermometer MLX90614
2018-10-28 15:58:14 -06:00
drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.
2018-09-02 15:36:25 -06:00
include/nuttx/spi/spi.h: Add a definition for a USBHOST SPI device. drivers/usbhost/usbhost_max3421e.c: Review and correct SPI locking usage.
2018-07-04 08:55:43 -06:00
drivers/syslog: syslog_initialize initialize dev/syslog too and call syslog to add the prefix and timestamp
2018-11-09 08:49:07 -06:00
Squashed commit of the following:
2018-08-27 11:55:30 -06:00
Updates from coding standard review of PRs 753 and 754
2018-11-09 07:44:22 -06:00
Fix lots of typos in C comments and Kconfig help text
2018-07-08 18:24:45 -06:00
et/icmpv6: Remove the coupling between ICMPv6 and Ethernet by moving all Ethernet stuff to neighbor_ethernet_out.c and make the mac address as first field.
2018-11-09 15:41:23 -06:00
Fixes warnings from header files:
2018-11-09 09:10:28 -06:00
configs/boardctl.c: Add support for board_app_finalinitialize()
2018-08-28 15:34:31 -06:00
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
ched/clock/: Remove g_monotonic_basetime and g_clock_monotonic_time since we don't need ensure monotonic time start from zero as state here: http://pubs.opengroup.org/onlinepubs/009696899/functions/clock_getres.html
2018-11-12 06:50:37 -06:00
include/nuttx/compiler.h: fix warning: __cplusplus is not defined. Some gcc derived compiler do not define __cplusplus
2018-08-27 05:53:16 -06:00
fs/proc and sched/environ: Add support for a procfs entry that will permit examining the environment of any task.
2018-08-10 10:16:39 -06:00
binfmt/ and libs/libc: Make exepath_*() more common:
2018-11-08 07:27:14 -06:00
sched/irq: Add support interrupt chains in NuttX. IRQ chain is very useful in these cases: (1) Multiple hardware connect to the same request line(e.g. PCI), (2) Need multiple driver to support one hardware block (like Linux MFD)
2018-08-24 15:10:23 -06:00
include/nuttx/kmalloc.h: Add {kumm/kmm}_calloc API. Add calloc API for manage user memory and kernel memory in Flat Build/Kernel Build without kernel heap.
2018-08-27 05:55:09 -06:00
Update some comments. Remove references to non-existent CONFIG_MAX_TASK_ARG.
2018-08-08 17:06:46 -06:00
include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.
2018-09-26 06:58:08 -06:00
include/nuttx/mutex.h: Add inline wrapper functions to more clearly support semaphores when used as mutexs.
2018-08-27 06:26:11 -06:00
Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE
2018-08-27 07:06:57 -06:00
mm/mm_gran: Add a function to get information about the state of the granuale allocator.
2017-11-14 14:41:03 -06:00
Merged in ebsong/nuttx (pull request #722 )
2018-09-21 03:18:38 +00:00
pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator.
2018-08-23 09:49:20 -06:00
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.
2018-09-26 06:58:08 -06:00
Update ChangeLog in prep for 7.20 release.
2017-03-08 10:09:48 -06:00
This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache().
2018-11-20 14:03:42 -06:00
include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.
2018-09-26 06:58:08 -06:00
include/nuttx/signal.h: Fix nxsig_notification comment
2018-11-09 09:15:00 -06:00
armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions.
2018-02-04 12:22:03 -06:00
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
Squashed commit of the following:
2018-09-12 08:57:06 -06:00
include/: Remove dangling space at the end of lines.
2017-06-28 13:30:08 -06:00
c6851201c0