luchianmihai/walnux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
walnux/include/nuttx/usb/cdcacm.h
patacongo 23a8f1d218 Add a text for the new composite USB device 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4341 42af7a65-404d-4744-a932-0658087f49c3
2012-01-26 23:14:27 +00:00

402 lines
14 KiB
C
Raw Blame History

/****************************************************************************
* include/nuttx/usb/cdcacm.h
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_USB_CDCACM_H
#define __INCLUDE_NUTTX_USB_CDCACM_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/ioctl.h>
#include <nuttx/usb/usb.h>
/****************************************************************************
* Preprocessor definitions
****************************************************************************/
/* Configuration ************************************************************/
/* CONFIG_CDCACM
* Enable compilation of the USB serial driver
* CONFIG_CDCACM_EP0MAXPACKET
* Endpoint 0 max packet size. Default 64.
* CONFIG_CDCACM_EPINTIN
* The logical 7-bit address of a hardware endpoint that supports
* interrupt IN operation. Default 2.
* CONFIG_CDCACM_EPINTIN_FSSIZE
* Max package size for the interrupt IN endpoint if full speed mode.
* Default 64.
* CONFIG_CDCACM_EPINTIN_HSSIZE
* Max package size for the interrupt IN endpoint if high speed mode.
* Default 64.
* CONFIG_CDCACM_EPBULKOUT
* The logical 7-bit address of a hardware endpoint that supports
* bulk OUT operation
* CONFIG_CDCACM_EPBULKOUT_FSSIZE
* Max package size for the bulk OUT endpoint if full speed mode.
* Default 64.
* CONFIG_CDCACM_EPBULKOUT_HSSIZE
* Max package size for the bulk OUT endpoint if high speed mode.
* Default 512.
* CONFIG_CDCACM_EPBULKIN
* The logical 7-bit address of a hardware endpoint that supports
* bulk IN operation
* CONFIG_CDCACM_EPBULKIN_FSSIZE
* Max package size for the bulk IN endpoint if full speed mode.
* Default 64.
* CONFIG_CDCACM_EPBULKIN_HSSIZE
* Max package size for the bulk IN endpoint if high speed mode.
* Default 512.
* CONFIG_CDCACM_NWRREQS and CONFIG_CDCACM_NRDREQS
* The number of write/read requests that can be in flight.
* CONFIG_CDCACM_NWRREQS includes write requests used for both the
* interrupt and bulk IN endpoints. Default 4.
* CONFIG_CDCACM_VENDORID and CONFIG_CDCACM_VENDORSTR
* The vendor ID code/string. Default 0x0525 and "NuttX"
* 0x0525 is the Netchip vendor and should not be used in any
* products. This default VID was selected for compatibility with
* the Linux CDC ACM default VID.
* CONFIG_CDCACM_PRODUCTID and CONFIG_CDCACM_PRODUCTSTR
* The product ID code/string. Default 0xa4a7 and "CDC/ACM Serial"
* 0xa4a7 was selected for compatibility with the Linux CDC ACM
* default PID.
* CONFIG_CDCACM_RXBUFSIZE and CONFIG_CDCACM_TXBUFSIZE
* Size of the serial receive/transmit buffers. Default 256.
*/
/* EP0 max packet size */
#ifndef CONFIG_CDCACM_EP0MAXPACKET
# define CONFIG_CDCACM_EP0MAXPACKET 64
#endif
/* Endpoint number and size (in bytes) of the CDC serial device-to-host (IN)
* notification interrupt endpoint.
*/
#ifndef CONFIG_CDCACM_EPINTIN
# define CONFIG_CDCACM_EPINTIN 2
#endif
#ifndef CONFIG_CDCACM_EPINTIN_FSSIZE
# define CONFIG_CDCACM_EPINTIN_FSSIZE 64
#endif
#ifndef CONFIG_CDCACM_EPINTIN_HSSIZE
# define CONFIG_CDCACM_EPINTIN_HSSIZE 64
#endif
/* Endpoint number and size (in bytes) of the CDC device-to-host (IN) data
* bulk endpoint. NOTE that difference sizes may be selected for full (FS)
* or high speed (HS) modes.
*/
#ifndef CONFIG_CDCACM_EPBULKIN
# define CONFIG_CDCACM_EPBULKIN 3
#endif
#ifndef CONFIG_CDCACM_EPBULKIN_FSSIZE
# define CONFIG_CDCACM_EPBULKIN_FSSIZE 64
#endif
#ifndef CONFIG_CDCACM_EPBULKIN_HSSIZE
# define CONFIG_CDCACM_EPBULKIN_HSSIZE 512
#endif
/* Endpoint number and size (in bytes) of the CDC host-to-device (OUT) data
* bulk endpoint. NOTE that difference sizes may be selected for full (FS)
* or high speed (HS) modes.
*/
#ifndef CONFIG_CDCACM_EPBULKOUT
# define CONFIG_CDCACM_EPBULKOUT 4
#endif
#ifndef CONFIG_CDCACM_EPBULKOUT_FSSIZE
# define CONFIG_CDCACM_EPBULKOUT_FSSIZE 64
#endif
#ifndef CONFIG_CDCACM_EPBULKOUT_HSSIZE
# define CONFIG_CDCACM_EPBULKOUT_HSSIZE 512
#endif
/* Number of requests in the write queue. This includes write requests used
* for both the interrupt and bulk IN endpoints.
*/
#ifndef CONFIG_CDCACM_NWRREQS
# define CONFIG_CDCACM_NWRREQS 4
#endif
/* Number of requests in the read queue */
#ifndef CONFIG_CDCACM_NRDREQS
# define CONFIG_CDCACM_NRDREQS 4
#endif
/* TX/RX buffer sizes */
#ifndef CONFIG_CDCACM_RXBUFSIZE
# define CONFIG_CDCACM_RXBUFSIZE 256
#endif
#ifndef CONFIG_CDCACM_TXBUFSIZE
# define CONFIG_CDCACM_TXBUFSIZE 256
#endif
/* Vendor and product IDs and strings. The default is the Linux Netchip
* CDC ACM VID and PID.
*/
#ifndef CONFIG_CDCACM_VENDORID
# define CONFIG_CDCACM_VENDORID 0x0525
#endif
#ifndef CONFIG_CDCACM_PRODUCTID
# define CONFIG_CDCACM_PRODUCTID 0xa4a7
#endif
#ifndef CONFIG_CDCACM_VENDORSTR
# define CONFIG_CDCACM_VENDORSTR "NuttX"
#endif
#ifndef CONFIG_CDCACM_PRODUCTSTR
# define CONFIG_CDCACM_PRODUCTSTR "CDC ACM Serial"
#endif
#undef CONFIG_CDCACM_SERIALSTR
#define CONFIG_CDCACM_SERIALSTR "0"
#undef CONFIG_CDCACM_CONFIGSTR
#define CONFIG_CDCACM_CONFIGSTR "Bulk"
/* USB Controller */
#ifndef CONFIG_USBDEV_SELFPOWERED
# define SELFPOWERED USB_CONFIG_ATT_SELFPOWER
#else
# define SELFPOWERED (0)
#endif
#ifndef CONFIG_USBDEV_REMOTEWAKEUP
# define REMOTEWAKEUP USB_CONFIG_ATTR_WAKEUP
#else
# define REMOTEWAKEUP (0)
#endif
#ifndef CONFIG_USBDEV_MAXPOWER
# define CONFIG_USBDEV_MAXPOWER 100
#endif
/* IOCTL Commands ***********************************************************/
/* The USB serial driver will support a subset of the TIOC IOCTL commands
* defined in include/nuttx/tioctl.h. This subset includes:
*
* CAICO_REGISTERCB
* Register a callback for serial event notification. Argument:
* cdcacm_callback_t. See cdcacm_callback_t type definition below.
* NOTE: The callback will most likely invoked at the interrupt level.
* The called back function should, therefore, limit its operations to
* invoking some kind of IPC to handle the serial event in some normal
* task environment.
* CAIOC_GETLINECODING
* Get current line coding. Argument: struct cdc_linecoding_s*.
* See include/nuttx/usb/cdc.h for structure definition. This IOCTL
* should be called to get the data associated with the
* CDCACM_EVENT_LINECODING event (see devent definition below).
* CAIOC_GETCTRLLINE
* Get control line status bits. Argument FAR int*. See
* include/nuttx/usb/cdc.h for bit definitions. This IOCTL should be
* called to get the data associated CDCACM_EVENT_CTRLLINE event (see event
* definition below).
* CAIOC_NOTIFY
* Send a serial state to the host via the Interrupt IN endpoint.
* Argument: int. This includes the current state of the carrier detect,
* DSR, break, and ring signal. See "Table 69: UART State Bitmap Values"
* and CDC_UART_definitions in include/nuttx/usb/cdc.h.
*/
#define CAIOC_REGISTERCB _CAIOC(0x0001)
#define CAIOC_GETLINECODING _CAIOC(0x0002)
#define CAIOC_GETCTRLLINE _CAIOC(0x0003)
#define CAIOC_NOTIFY _CAIOC(0x0004)
/****************************************************************************
* Public Types
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
# define EXTERN extern "C"
extern "C" {
#else
# define EXTERN extern
#endif
/* Reported serial events. Data is associated with CDCACM_EVENT_LINECODING
* and CDCACM_EVENT_CTRLLINE. The data may be obtained using CDCACM IOCTL
* commands described above.
*
* CDCACM_EVENT_LINECODING - See "Table 50: Line Coding Structure" and struct
* cdc_linecoding_s in include/nuttx/usb/cdc.h.
* CDCACM_EVENT_CTRLLINE - See "Table 51: Control Signal Bitmap Values for
* SetControlLineState" and definitions in include/nutt/usb/cdc.h
* CDCACM_EVENT_SENDBREAK - See Paragraph "6.2.15 SendBreak." This request
* sends special carrier modulation that generates an RS-232 style break.
*/
enum cdcacm_event_e
{
CDCACM_EVENT_LINECODING = 0, /* New line coding received from host */
CDCACM_EVENT_CTRLLINE, /* New control line status received from host */
CDCACM_EVENT_SENDBREAK /* Send break request received */
};
typedef FAR void (*cdcacm_callback_t)(enum cdcacm_event_e event);
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: board_cdcclassobject
*
* Description:
* If the CDC serial class driver is part of composite device, then
* board-specific logic must provide board_cdcclassobject(). In the simplest
* case, board_cdcclassobject() is simply a wrapper around cdcacm_classobject()
* that provides the correct device minor number.
*
* Input Parameters:
* classdev - The location to return the CDC serial class' device
* instance.
*
* Returned Value:
* 0 on success; a negated errno on failure
*
****************************************************************************/
#if defined(CONFIG_USBDEV_COMPOSITE) && defined(CONFIG_CDCACM_COMPOSITE)
struct usbdevclass_driver_s;
EXTERN int board_cdcclassobject(FAR struct usbdevclass_driver_s **classdev);
#endif
/****************************************************************************
* Name: board_cdcuninitialize
*
* Description:
* Un-initialize the USB serial class driver. This is just an application-
* specific wrapper aboutn cdcadm_unitialize() that is called form the composite
* device logic.
*
* Input Parameters:
* classdev - The class driver instrance previously give to the composite
* driver by board_cdcclassobject().
*
* Returned Value:
* None
*
****************************************************************************/
#if defined(CONFIG_USBDEV_COMPOSITE) && defined(CONFIG_CDCACM_COMPOSITE)
struct usbdevclass_driver_s;
EXTERN void board_cdcuninitialize(FAR struct usbdevclass_driver_s *classdev);
#endif
/****************************************************************************
* Name: cdcacm_classobject
*
* Description:
* Register USB serial port (and USB serial console if so configured) and
* return the class object.
*
* Input Parameter:
* minor - Device minor number. E.g., minor 0 would correspond to
* /dev/ttyUSB0.
* classdev - The location to return the CDC serial class' device
* instance.
*
* Returned Value:
* A pointer to the allocated class object (NULL on failure).
*
****************************************************************************/
#if defined(CONFIG_USBDEV_COMPOSITE) && defined(CONFIG_CDCACM_COMPOSITE)
int cdcacm_classobject(int minor, FAR struct usbdevclass_driver_s **classdev);
#endif
/****************************************************************************
* Name: cdcacm_initialize
*
* Description:
* Register USB serial port (and USB serial console if so configured).
*
* Input Parameter:
* Device minor number. E.g., minor 0 would correspond to /dev/ttyUSB0.
*
* Returned Value:
* Zero (OK) means that the driver was successfully registered. On any
* failure, a negated errno value is retured.
*
****************************************************************************/
#if !defined(CONFIG_USBDEV_COMPOSITE) || !defined(CONFIG_CDCACM_COMPOSITE)
EXTERN int cdcacm_initialize(int minor);
#endif
/****************************************************************************
* Name: cdcacm_uninitialize
*
* Description:
* Un-initialize the USB storage class driver
*
* Input Parameters:
* handle - The handle returned by a previous call to cdcacm_configure().
*
* Returned Value:
* None
*
****************************************************************************/
#if defined(CONFIG_USBDEV_COMPOSITE) && defined(CONFIG_CDCACM_COMPOSITE)
EXTERN void cdcacm_uninitialize(FAR struct usbdevclass_driver_s *classdev);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __INCLUDE_NUTTX_USB_CDCACM_H */
Reference in a new issue View git blame Copy permalink