Implement functionality to mount the tmpfs file system during the bring-up process.
* Added conditional compilation for tmpfs support
* Included error logging for mount failures
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary:
In order to reduce the cost of using coredump, we disable BOARD_COREDUMP_COMPRESSION by default when it is not necessary.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Add initial support for Seeed Studio XIAO RP2350 Board. Initial
support includes serial and usb NuttShell, and a combo
configuration for gpio, leds and ws2812.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
I found that the gpio example code can't be tested on nrf5340-dk.
Enabling CONFIG_DEV_GPIO wouldn't register gpio pins as /dev/gpio*.
NRF5340-dk has 4 LEDs and 4 User Buttons.
By setting CONFIG_DEV_GPIO=y,
- 4 LEDs will be configured as GPIO outputs
- 2 Buttons as GPIO inputs, and
- 2 Buttons as GPIO interrupt inputs
This PR will allows user to test GPIO examples on NRF5340-dk board.
Signed-off-by: Aung Khant Maw <aungkhantmaw64@gmail.com>
This PR adds support for the PINE64 StarPro64 64-bit RISC-V SBC,
based on ESWIN EIC7700X SoC. Most of the code was derived from NuttX
for Milk-V Duo S (SOPHGO SG2000). The modified code is explained here:
https://lupyuen.github.io/articles/starpro64#appendix-port-nuttx-to-starpro64
Modified Files:
boards/Kconfig: Added StarPro64 board
New Files in boards/risc-v/eic7700x/starpro64:
src/eic7700x_appinit.c: Startup Code
include/board.h: StarPro64 Definitions
include/board_memorymap.h: Memory Map
src/etc/init.d/rc.sysinit, rcS: Startup Script
src/.gitignore: Ignore the tmp filesystem
scripts/ld.script: Linker Script
scripts/Make.defs: StarPro64 Makefile
src/Makefile: StarPro64 Makefile
Kconfig: StarPro64 Config
configs/nsh/defconfig: Build Config for starpro64:nsh
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
add discard-data=on in proxy launch command, so the proxy side
will clean the share memory to make sure that the shared memory is clean
every time server and proxy are started.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Summary
Board logic change.
This PR adds weak_function attributes to the RP2040 common SPI board logic.
This allows board developers to override and extend the SPI board logic.
Signed-off-by: Kevin Witteveen (MartiniMarter) <kevinwit1999@gmail.com>
Now, espressif qemu supports MCUboot, so we can switch the app
format.
The build was failing with the legacy app format because
_ext_ram_bss_end and _ext_ram_bss_start are not defined in the
legacy linker file.
Update the wireless symbols from ESP32_* to ESPRESSIF_* for using common layer.
Remove ESP32 specific WiFi files and edit build system to use common layer.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Many STM32L4 boards are missing stm32_bringup.c. That confusion
was created when stm32_appinit.c was created. It introduced a new
way to do the board initialization without depending on NSH arch
specific initialization.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This adds minimal support for NXP MCX-N236 CPU. Peripherals supported are:
- GPIO
- PINMUX
- CLOCK
- LPUART
An example board, FRDM-MCXN236 is also added, with a basic profile that
boots into nsh.
Signed-off-by: Ville Juven <ville.juven@unikie.com>
This commit allows placing .bss data into the external PSRAM.
Previously, the PSRAM was fully allocated to the heap memory only
and now part of it can be used to allocate .bss data freeing the
internal memory.
Based on configuration of usb_device.
Quick start:
./tools/configure.sh -l esp32s3-devkit:fastboot
make flash -j ESPTOOL_PORT=/dev/ttyACMx
(Optional) You can get full defconfig by executing following commands after SAVING your stages if necessary:
./tools/configure.sh -l esp32s3-devkit:fastboot
make savedefconfig
cat defconfig
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Update the wireless symbols from ESP32S3_* to ESPRESSIF_* for using common layer.
Remove ESP32S3 specific WiFi files and edit build system to use common layer.
boards/nucleo-f302r8/cansock: enable SocketCAN utils, so user can easly use CAN tools.
This board has only 64KB of FLASH which requires some additional optimization to fit CAN tools on it.
Signed-off-by: raiden00pl <raiden00@railab.me>
This adds initial bootable PROTECTED mode config `qemu-armv7r:pnsh`,
more tests are still needed. Flat mode config qemu-armv7r:nsh still
works.
- The nuttx.ld is for building nuttx ELF
- The nuttx_user.ld is for building nuttx_user ELF
They both include the memory.ld with preprocessing.
To run, use the QEMU mentioned in PR:
```sh
$ qemu-system-arm -M virt -semihosting -nographic -cpu cortex-r5f \
-device loader,file=nuttx_user -device loader,file=nuttx
```
Signed-off-by: Yanfeng Liu <p-liuyanfeng9@xiaomi.com>
This aligns linker script file name with built program name so that
nuttx.ld helps to build nuttx ELF
Signed-off-by: Yanfeng Liu <p-liuyanfeng9@xiaomi.com>
