Initial I2C implementation such that I2C sending and receiving now
works well enough to use the BMP280 driver for a BMP280 device connected
to any of I2C0-I2C6 on the default pins. I2CTOOL also works for these
interfaces.
Functionality for "no stop" and "no start" options is not present.
Implementing that is not clear from the peripheral datasheet and will be
a challenge.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Migrated the legacy README.txt to RST format. I removed some information
which no longer applies since 2008 when this documentation was written.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
"tc397" is a chip name which is not appropriate to act as a board name.
the board supported here is actually "a2g-tc397-5v-tft".
The correct definition is : tricore is arch name, tc3xx is arch family
name, tc397 is chip name and the borad name is a2g-tc397-5v-tft
Introduce EXT1 wakeup functionality to the ESP32-S3 power management
subsystem. With this feature, the ESP32-S3 can wake up from PM_STANDBY
or PM_SLEEP when one or more RTC GPIOs trigger the EXT1 condition.
Changes include:
- Added EXT1 wakeup configuration and preparation logic in rtc code.
- Integrated EXT1 handling in pmstandby() and pmsleep().
- New board-level Kconfig options under ESP32-S3 DevKit menu:
- CONFIG_PM_EXT1_WAKEUP: enable EXT1 wakeup support
- CONFIG_PM_EXT1_WAKEUP_RTC_GPIO<n>: select RTC GPIOs as wake sources
- CONFIG_PM_EXT1_WAKEUP_TRIGGER_MODE: choose wakeup on HIGH or LOW level
- Fixing Kconfig style
- Fixing comments standard
- Adding PM documentation for esp32s3-devkit
Impact:
- No build impact unless CONFIG_PM_EXT1_WAKEUP is enabled.
- When enabled, ESP32-S3 can wake from low-power states via RTC GPIOs.
- No new public API introduced; controlled via board Kconfig.
Tested on ESP32-S3 DevKit:
- Configured GPIO4 and GPIO5 as EXT1 wake sources.
- Verified wakeup from light sleep and deep sleep on external signals.
- Wakeup reason correctly reported as EXT1.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
Add a new defconfig that includes support for an ADS7046 sensor
and extend the existing documentation to include its description.
Signed-off-by: Niccolò Maggioni <nicco.maggioni+nuttx@gmail.com>
- Added esp32s3_board_spislavedev.c with board-level SPI slave logic
- Added esp32s3_board_spislavedev.h public header in common/include
- Updated Make.defs to include the new source when CONFIG_SPI_SLAVE_DRIVER=y
- Adding spislv board config to esp32s3-devkit
- Adding documentation of esp32s3 devkit spi slv
- Fixing path include in esp32s3_board_spislavedev.c
- Fixing relative path in the header of esp32s3_board_spislavedev.h
- Removing neasted check in Make.defs, consistency reasons
This provides initial support for SPI slave device initialization
on ESP32-S3 boards, making the feature available under conditional
build configuration.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
Add support for the Texas Instruments TMP112 I2C/SMBus digital
temperature sensor. Also add a new defconfig that includes
support for a TMP112 sensor and extend the existing documentation
to include its description.
Signed-off-by: Niccolò Maggioni <nicco.maggioni+nuttx@gmail.com>
This commit adds support for MAX31855 and MAX6675 thermocouple
sensors on the STM32F401RC-RS485 board via SPI1. It also updates
the board documentation accordingly.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
This commit adds support for the HX711 ADC in the STM32F4-Discovery
board and updates the board documentation accordingly.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
- Committing initial code for DTS. Missing ISR. Works for PCLK1. Cannot get to work for LSE.
- Pushing everything. Working with LSE now.
- Many fixes. Fixed interrupt setting. Added data structures.
- Changed interrupt handling. Removed FARs. Added Kconfig options for selecting interrupts.
- Updated info and formatting.
- Formatting fixes.
- Formatting.
- Changed iten to regval.
- Removed Triggger
- Formatting fixes per Pull request.
- Changed private_types to have stm32_ prefix. Used depends on for DTS Kconfig Menu. Fixed formatting per PR.
- Fixed spacing of function prototypes.
- Fixed indent on line
- Added documentation for STM32H5 and Nucleo-H563ZI regarding DTS. Also added GPDMA support to STM32H5 documentation (previous PR). Made stm32_dts.c more modular. stm32_dts_activate is now much more readable. Added comments/descriptions to private functions. Lastly, added a nucleo-h563zi:dts configuration.
This commit creates a sbutton device that uses a single button to
create a keyboard driver that returns TAB or ENTER depending how
long the user keeps the button pressed.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This commit adds support for the HX711 ADC in the STM32F401RC-RS485
board and updates the board documentation accordingly.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
AVR uses Hardward architecture with separate address space for program
memory (flash) and data memory (RAM). Normal program flow can only
access data memory which means that all variables - including const
variables - have to be copied into RAM to be accessible. (This happens
automatically during startup.)
It is possible to work around this limitation in software but that
can have severe impact on performance and/or API complexity. It is hardly
feasible to change NuttX interfaces in a way that would allow to make use
of this workaround.
On newer AVR families, there is an alternative option enabled by this patch.
These chips map part of their program memory (a 32kB window) into data
memory address space. This patch leverages this feature and adds support
for placing const variables into the mapped window. No copy to RAM is done
for them.
Const variables are therefore loaded directly from flash (not consuming
RAM) while still being available to be used by any NuttX interface.
Linker script of breadxavr board is changed to make use of these changes.
Tested by verifying string addresses - parameters in printf call
in a custom application (and also by running the application and verifying
its output.)
Documentation tested by build.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This patch adds a document that describes why const variables need to be
copied into the RAM in AVR architecture for normal program flow in NuttX.
It then describes options of accessing them directly from the flash without
need to do any copying.
Patch was tested by building the documentation.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This commit adds SD card support to the WeAct STM32H743 board configuration.
The implementation enables the board to interface with SD cards through the
SDMMC peripheral, allowing file system operations and data storage capabilities.
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
