This reverts commit 20fcdcf905f279a9c4527be399a90590f458db1f.
The reason is that the erase buffer isn't always used in most cases.
Signed-off-by: jingfei <jingfei@xiaomi.com>
We have adjusted the registration method for MTD devices
in nuttx/boards, replacing the previous approach using
ftl_initialize() and bchdev_register() with
register_mtddriver().
When registering MTD devices via register_mtddriver(),
FTL and BCH wrappers will be added during the open() process:
1. Character Device Mode:
When accessing the MTD device node via the open() interface,
the device will be automatically converted to a character
device. Both FTL and BCH wrappers will be implicitly added,
provided that BCH support is enabled in the configuration.
2. Block Device Mode:
When accessing the MTD device node via open_blockdriver(),
the device will be treated as a block device, with only
the FTL wrapper automatically applied.
Due to the automatic wrapping of MTD devices during the
open() process, the legacy registration methods
ftl_initialize() and bchdev_register() are no longer
required for MTD device registration for user code and should
be used only internally within fs and driver code.
Signed-off-by: jingfei <jingfei@xiaomi.com>
Updates the example documentation for a new example: local update agent.
This example allows the user to update MCUBoot image from a locally stored file.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
This commit creates a sbutton device that uses a single button to
create a keyboard driver that returns TAB or ENTER depending how
long the user keeps the button pressed.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
In the toolchain, ARCH_TOOLCHAIN_XXX is used to select the compiler to be used. If clang is selected here, subsequent errors will occur
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Updates the ADS1115 documentation with information about the two new
commands for triggering conversion and reading the result.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Since the ADS1115 has a relative slow conversion rate, this additional
ioctl command makes it possible to trigger a conversion before reading
the reading the conversion result, allowing the user to perform other
computation in between instead of waiting for the conversion time to
complete. It improves sampling time.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
The tx int handler will call uart_xmitchars() to make a fake interrupt event,
but this is unsafe after enabling interrupts. This PR will add a critical section
to ensure that the txint process will not be interrupted by the IRQ
Signed-off-by: chao an <anchao.archer@bytedance.com>
idr_destroy() would loop over the removed and alloced
RB tree nodes freeing them but not removing them from
the trees. From the perspective of the RB tree those
nodes would remain valid, while in fact, they were free
memory, potentially reallocated for other purposes, or
otherwise overwritten by the allocator with metadata.
This would cause (seemingly random) memory corruption
crashes triggered by the RB tree code trying to access
link fields from the free'd nodes.
Fix that by removing the nodes before freeing them.
Signed-off-by: George Poulios <gpoulios@census-labs.com>
This commit adds support for the HX711 ADC in the STM32F401RC-RS485
board and updates the board documentation accordingly.
Signed-off-by: Rodrigo Sim <rcsim10@gmail.com>
AVR uses Hardward architecture with separate address space for program
memory (flash) and data memory (RAM). Normal program flow can only
access data memory which means that all variables - including const
variables - have to be copied into RAM to be accessible. (This happens
automatically during startup.)
It is possible to work around this limitation in software but that
can have severe impact on performance and/or API complexity. It is hardly
feasible to change NuttX interfaces in a way that would allow to make use
of this workaround.
On newer AVR families, there is an alternative option enabled by this patch.
These chips map part of their program memory (a 32kB window) into data
memory address space. This patch leverages this feature and adds support
for placing const variables into the mapped window. No copy to RAM is done
for them.
Const variables are therefore loaded directly from flash (not consuming
RAM) while still being available to be used by any NuttX interface.
Linker script of breadxavr board is changed to make use of these changes.
Tested by verifying string addresses - parameters in printf call
in a custom application (and also by running the application and verifying
its output.)
Documentation tested by build.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
This patch adds a document that describes why const variables need to be
copied into the RAM in AVR architecture for normal program flow in NuttX.
It then describes options of accessing them directly from the flash without
need to do any copying.
Patch was tested by building the documentation.
Signed-off-by: Kerogit <kr.git@kerogit.eu>
Added logic to set hasdma to false. This is needed to enable or not enable interrupts on a per ADC basis. Made other minor formatting changes.
Fixed build issues with non ADC/DMA configurations.
This commit removes the termios dependency of the command to set fix
rate. It makes the MINMEA dependency present in the Kconfig options for
the driver, and it also adds a retry limit to the boot message
verification of 3 times. The documentation has been updated to reflect
the correct signature for the registration function and fix some
formatting.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
When using the ILI9342C LCD on the esp32s3-box-3 development board, the
displayed colors are inverted.
add content
Manually converts the byte order of color data from little-endian
to big-endian before transmission.
